真空技术在污水处理中的若干典型应用

介绍了真空技术在污水处理中的几种典型应用，真空结晶法在以分离污水中具有结晶性能的固体溶剂；真空过滤脱水用于初沉池和消化池污泥脱水，真空浮选法通过制造负压条件加速浮选过程；还有真空搅拌、真空脱气等等。这些足以说明真空技术在污水处理乃至环境保护中占有重要的一席之地。     

谐振式力传感器敏感结构的研究

利用材料力学及弹性力学法，对石英晶体谐振式力传感器的悬臂梁结构进行了研究，得出了双梁单岛及三梁单岛悬臂梁结构的力转移系数，在与实验结果进行了比较后证明，支承结构的理论推导与实验结果一致。     

Experimental Study about Activated Water Generated by the Electro—hydraulic Impulse Strengthening the Mechanical Performance of Concrete

On the basis of a great number of experiments, it is proved that the strength of concrete is improved greatly when it is mixed with activated water produced by the electro-hydraulic impulse.With the proper parameters, the compression strength of concrete can be increased by 45% .The reason for improvement of concrete strength by using activated water is discussed from the aspect of the structure of molecule.     

弹药包装冲击强度试验方法的改进研究

介绍一种新的弹药包装冲击强度试验方法，应用该试验方法可以防止冲击强度试验时出现与期望值相反的现象。     

个人剂量仪两种电源电路设计的比较

个人剂量仪器一般要求采用电池供电，并且希望电池使用的时间越长越好，随着电池电压的降低，仪器的一些性能也会下降，合理的电源设计会延长电池的使用寿命，也能提高仪器性能，介绍了电池直接供电和采用电源芯片转换供电两种方法，并结合个人剂量仪主要进行了仪器功耗，电池使用寿命的比较，也进行了仪器其它性能，仪器成本，体积等方面的比较，通过比较结果，可根据仪器的实际要求来选择电源电路设计的方法。     

Field-induced spin density waves in Bechgaard salts in the presence of normal impurities

We study theoretically the effect of the quasiparticle scattering in field-induced spin density waves (FISDW) in Bechgaard salts in a high magnetic field. The effects of scattering are introduced by a random impurity model similar to the one used by Zittartz in his analysis of the charge density wave. Within the single-gap approximation and weak impurity scattering, we find that the FISDW with normal impurities is similar to a superconductor with magnetic impurities. From this analogy the thermodynamics as well as the electronic thermal conductivity and the sound attenuation coefficient of the FISDW are obtained.On leave of absence from Nankai University, China.     

黄土高原多沙粗沙区高含沙水流发生频率的时间变化

高含沙水流的频繁发生是黄土高原多沙粗沙区产生高强度侵蚀的重要原因。本文基于1967—1989年的系列泥沙资料和面雨量资料，分析了黄土高原多沙粗沙区8个流域高含沙水流发生频率随时间的变化过程。根据其不同的变化趋势，将研究区所有流域分成了两类。第一种类型高含沙水流发生频率随时间逐渐减小；第二种类型高含沙水流随时间呈先减小后增大的变化趋势。从汛期降雨量（6—9月）及人类活动（包括人为的减沙活动和人为增沙活动）两个方面对高含沙水流随时间变化趋势的产生原因进行了分析。结果表明，第一种类型主要受到同期汛期降雨量的减少以及各种水利水保措施减沙量从上世纪60一80年代逐渐增大的影响；第二种类型的流域在上世纪60年代末到80年代初高含沙水流发生频率的减小主要是因为上世纪60、70年代大量修建的淤地坝在70年代发挥了显著的拦减泥沙的作用；但到了80年代以后，新建淤地坝很少。原有淤地坝已大部失效，另外人为的增沙活动，如修路、开矿、建窑等活动在80年代以后显著增加，上述因素促使高含沙水流发生频率在80年代初期以后呈随时间增加的趋势。     

内导流筒折流杆浮头式换热器冷凝效果研究

对内导流筒折流杆浮头式换热器中不同结构管束的冷凝传热试验研究表明 ,在适宜的气速下 ,折流杆换热器比折流板换热器壳程传热系数提高 1倍以上 ,压降降低 5 0 %左右 ,综合性能指标αo/Δps 提高 2倍以上 ,且气速愈高冷凝效果愈好 ,说明将GB 15 1所规定的内导流筒浮头式换热器的折流板管束改为折流杆管束是行之有效的。     

Colloidal silica removal in coagulation processes for wastewater reuse in a high-tech industrial park.

Four experiments of coagulation and flocculation were conducted to investigate the characteristics of colloidal silica removal in a high-tech industrial wastewater treatment plant for reclamation and reuse of the effluent. Experimental results illustrated that poly-aluminium chloride (PACl) showed higher performances on colloidal silica removal than alum. Interestingly, the two coagulants demonstrated the same capacity on silica removal. The specific silica removal capacity was approximately 0.135 mg SiO2/mg Al2O3 when the dosage of coagulants was in the range 30-150 mg/L Al2O3. In addition, the silica was reduced significantly at the condition of pH above 8. Experimental data implied that precipitation of aluminium flocs was the major mechanism for colloid silica removal in PACl and alum coagulation, besides, charge adsorption was also important for improving removal efficiency. Moreover, the addition of polyacrylic acid (PAA) as a flocculant could slightly advance silica removal in the PACl coagulation. The combined PACl/PAA/flocs coagulation was effective for the removal of colloidal silica, soluble COD, and turbidity and also suitable as a pretreatment unit in wastewater reclamation and reuse processes.     

An Innovative Understanding of Metal–Insulator–Metal (MIM)-Capacitor Degradation Under Constant-Current Stress

This paper provides a new understanding of metal-insulator-metal-capacitor-degradation behavior under a wide range of constant-current-stress conditions. It was found that capacitance degrades with stress, but the behavior of the degradation strongly depends on the stress-current density. At high stress levels, the capacitance increases logarithmically as the injection charge increases until dielectric breakdown occurs. At lower stress conditions, the degradation rate is proportional to the stress current and reverses after a certain period of time. A metal-insulator interlayer is observed using cross-sectional transmission-electron-microscopy micrographs, which possibly explains this reversal phenomenon.