苯甲酸催化加氢合成环己基甲酸的研究

采用绿色合成法,在水相条件下,在Pd/C催化剂的作用下用苯甲酸催化氢化合成环己基甲酸.通过一系列的实验,得到了较好的合成环己基甲酸的工艺条件,在该条件下,能够得到比较纯的产物和较好的产物收率.     

一水合硫酸氢钠催化β-萘甲醚的合成

利用一水合硫酸氢钠催化合成 β 萘甲醚 ,3 6 gβ 萘酚 ,3ml甲醇 ,1 5g一水合硫酸氢钠 ,80℃反应5h ,HPLC分析产率达 78 3%。固体催化剂容易过滤分离。     

基于浏览器 /服务器的橡胶加工网络测控系统

通过对客户机／服务器模式和浏览器／服务器模式的比较，选择浏览器／服务器模式组建了基于Internt/Intranet的远程橡胶加工网络测控系统，并介绍了系统的开发模式、方法和注意事项。     

调整工艺条件降低脲醛胶生产的操作成本

根据生成脲醛树脂的反应机理和反应特性,对生产周期的控制步骤——缩聚阶段的工艺条件进行调整,采用在不同反应阶段调整不同工艺条件的方法,使整个反应周期由原来的6．0h缩短到5．0h,从而提高设备利用率、降低生产的操作成本,同时因充分利用反应自身放出的热量,可降低生产能耗。     

八甲基环四硅氧烷与氨取代基有机硅单体的共聚动力学Ⅱ模型考核与结果讨论

对前文 (I)的共聚动力学模型进行了分析与简化 ,并分别通过对各影响因素的单因素实验和多因素相互作用实验对模型进行了进一步的考核 ,确定了模型参数并通过模型对聚合动力学行为作了说明     

Yb3+掺杂KLa(WO4)2激光晶体生长与光谱分析

采用提拉法生长出掺镱钨酸镧钾[Yb:KLa(WO4)2,Yb:KLW]晶体,测试了晶体的红外光谱和Raman光谱,对出现的振动模式进行了归属.从X射线衍射分析得到晶胞参数a=b=0.532 nm,c=1.189 nm.通过热重-差热分析得到晶体的熔点为1 119 ℃,在熔点以下没有相变.测试了晶体的吸收光谱和荧光光谱,计算了相应的光谱参数.结果表明:该晶体发射波长为1 021 nm,在931,981 nm附近有较强、较宽的吸收峰,适合用InGaAs半导体激光泵浦.     

Vapor phase carbonylation of ethanol with Ni-Zn/c catalyst

Vapor phase carbonylation of ethanol with Ni/C and Ni-Zn/C catalyst was investigatedunder atmospheric pressure.Ni-Zn/C was found to have a significantly higher activity andselectivity than Ni/C.Effects of Zn and Ni loading on ethanol conversion and productdistributions were also investigated,and the sequence of metal loading was compared.The cata-lyst was characterized by XRD(X-ray diffraction)and SEM-EDS.The spectra of XRDdemonstrated that the catalyst structure was changed from crystalline to non-crystalline in theprocess of carbonylation.Stable iodide compound was formed due to the interaction betweenC_2H_5I and active metals.The authors believe that the active phase of carbonylation might havebeen non-crystalline.     

Effect of Product Conductivity on Field-Activated Combustion Synthesis

Experimental and modeling results on the field-activated combustion synthesis (FACS) of Nb₅Si₃ are reported. In the absence of an electric field and without reactant preheating, Nb₅Si₃ cannot be prepared by self-propagating high-temperature synthesis (SHS). Under the influence of a field a self-sustaining combustion wave is established whose rate of propagation decreases with traveled distance. For relatively low field values, the wave propagation mode changes from a continuous (smooth) to a spin mode. The product of synthesis depends on the mode of propagation. Synthesis during continuous wave propagation results in the formation of Nb₅Si₃, primarily in the α-modification. In contrast, when the wave propagates in a spin mode, the product is NbSi₂ with unreacted niobium. The present observations demonstrate a case where the field effect is not localized, as was the case in previous studies. The difference in behavior is attributed to differences in the electrical conductivities of the product phases.     

氮化硅结合碳化硅管状制品的研制

简介了氮化硅结合碳化硅管状制品研制的必要性 ,确定了原材料及粒度配比 ,选择了合适的成型方法及添加剂 ,介绍了氮化烧成机理。研制出的制品其质量和使用性能接近同类进口产品 ,具有良好的市场前景和广泛的推广应用价值。     

主元分析-径向基函数神经网络软测量方法研究

主元分析方法是基于多元统计分析的数据处理方法,径向基函数(RBF)网络能很好地用于非线性系统建模.针对丙烯腈聚合物水含量这一腈纶生产中的关键指标无法在现场进行在线检测的情况,运用主元分析方法对输入变量进行主元分析以达到降维的目的,再通过RBF神经网络建立非线性软测量模型.仿真结果表明,该模型具有较高的预测精度.