黄河龙青段主要环境工程地质问题分析思路

介绍了黄河上游龙青段主要环境工程地质问题的分析思路，以达到抛砖引玉，交流和提高电工程地质勘测水平的目的。     

超大型材生产经验

对几种超大型材挤压生产的工艺技术、工模具设计、挤压参数控制等过程进行了分析，通过例子总结了挤压生产超大型材的经验及关键技术。     

Trace elements in particles of motor vehicle exhaust in Shanghai

A nuclear microprobe with high spatial resolution and high analytical sensitivity was applied to analyze trace elements,especially lead,in vehicle exhaust of Shanghai city.The result shows that the chemical composition and its corresponding x-ray relative intensity are different among different vehicle exhausts.There are many kinds of metal elements in particles of vehicle exhaust.most are harmful to people,such as Ti,Cr,Mn,Pb,etc.We found that the lead concentration was 6820μg/g and the bromine concentration was 5300μg/g in the exhaust from Santana using leaded gasoline(SULG).which is higher than any other kinds of vehicle exhausts.We have also detected the minimum lead in the particles of unleaded gasoline and its content varies from one to another.Its mean concentration was 450μg/g and the highest reached 6210μg/g.The unleaded gasoline‘s Pb existed in the whole particle while the leaded gasoline‘s enriched in the surface of the particle and was more harmful to the human beings.     

啤酒标签用铝箔力学性能研究

分析研究了连续铸轧坯料的合金成分，冶金组织和热处理工艺对啤酒标用铝箔力学性能的影响，选定成形性优良的合金系列，并优化铸轧工艺和热处理工艺是提高铝箔力学性能的关键。     

Synthesis and Characterization of Poly （L-lactide-co-ε-caprolactone） Copolymers

A series of random and block poly（ L-lactide-co-e-caprolactone ） （ PCLA ） copolymers whh different composition are prepared using stannous octaoate as catalyst.The effects of the amount of initiator on the intrinsic viscosity have been investigated. The structure of the PCLA copolymers is characterized by means of nuclear magnetic resonance（ NMR ）, Fourier transform infrared spectrum （ FTIR ）, differential scanning calorimetry （ DSC ） and X- ray diffraction （ XRD ） methods. It is shown that the synthesis condition and the composition of copolymers obrious influence on the structure of PCLA copolymers. Hydrolytic degradation of the copolymers in a PBS solution of pH 7.4 at 37.0℃ shows that the copolymers of different composhions degrade at different rates.     

JOINING MECHANISMS OF β''''-Al2O3 CERAMIC AND PYREX GLASS TO Al MATRIX COMPOSITE

The bonding of β'-Al2O3 and pyrex glass to Al matrix composites by anodic bonding process is achieved. The microstructure of the bonded interface and the joining mechanisms are analyzed with scanning electron microscope (SEM), energy dispersive X-ray fluorescence spectrometer (EDX). It is observed that the bonding region across the interface consists of the metal layer, oxide transitional layer and the ceramic layer, with the transitional layer composed of surface region and sub-surface region. The bonding process can mainly be categorized into anodic bonding process and solid state diffusing process. The pile-up of the ions and its drift in the interface area are the main reasons for anode oxidation and joining of the interface. The temperature, voltage and the drift ions in the ceramic or glass during the bonding process are the essential conditions to solid state diffusing and oxide bonding at the interface. The voltages, temperature, pressure as well as the surface state are the main factors that influence the anodic bonding.     

微波-表面活性剂协同提取万寿菊叶黄素工艺研究

以提高万寿菊叶黄素的提取率为目的,采用单因数实验结合正交实验的方法.研究了微波-表面活性剂协同提取万寿菊花中叶黄素的丁艺.结果表明:万寿菊叶黄素的微波-表面活性剂协同提取最优工艺为:以乙酸乙酯为提取剂,表面活性剂Tween-20为最佳助萃取剂(质量分数为0.03%),提取固液比1∶60(g/mL),微波功率400 W,微波提取温度为60℃,提取时间2 min.在此工艺下,万寿菊叶黄素的提取量为3.209 mg/g.     

西霞院水利枢纽工程泄洪闸振冲碎石桩基础处理

通过西霞院水利枢纽工程泄洪闸振冲碎石桩基础处理施工方法论述,给出了加砂层振冲碎石桩施工造孔水压、水量、成孔速度、填料级配、填料方法以及振密电流值、留振时间等施工控制参数。     

仿真环境中的网络攻击模型设计

阐述了仿真环境中的网络攻击模型的设计,建立了一个网络攻击仿真模型,用以产生网络攻击,以达到摧毁网络的机密性、完整性和可用性的目的;采用知识表达的方法来建立模型,该模型包含具有知识库和推理机的专家系统,通过随时间而变化的量,使模型具有基于仿真时钟的推理能力;在攻击模型的设计中,定义了它的基本状态和状态跃迁函数,说明了模型的行为,以及攻击策略的制定,最佳策略的选择,攻击选择原则等问题。     

第二代反坦克导弹射击训练计算机成绩评定方法

文中应用数理统计方法并结合教学及实弹射击实践,提出了在第二代反坦克导弹模拟训练器材中实现智能化评定射击训练成绩的主要方法.