A spectro-microscopic investigation of Fe-Co bimetallic catalysts supported on MgO for the production of thin carbon nanotubes

Fe-Co bimetallic catalysts supported on MgO were studied for the catalytic chemical vapor deposition growth of carbon nanotubes (CNTs). Different wt.% metal loadings were investigated at various deposition temperatures and times. Characterization of the products involved thermal analysis (DTA-TGA), X-ray diffraction, spectroscopy (Raman, UPS, EELS and STS) and microscopy (SEM, TEM and STM) techniques. It was found that the metal content is critical, not only to the yield and the structural quality of the synthesized carbon nanotubes, but it can be also used to tune the desired type of synthesized nanotubes. Lower (2 wt.%) loadings of Fe-Co catalysts favor the formation of single- and/or double-wall CNTs for deposition time and temperature 30 min and 800 °C, respectively. Thermal analysis and Raman measurements showed that these thin CNTs were synthesized at high amounts (CNT-per-catalyst wt.% of more than 100%), exhibiting high graphitization degree with only traces of by-products (mainly amorphous carbon) among them. Microscopy results revealed the formation of CNTs bundles, consisting of individual nanotubes with less than 2 nm outer diameter, while additional energy loss measurements pointed out that the deposited CNTs are mainly single wall. Higher (10 wt.%) Fe-Co loadings resulted to the formation of multi-wall CNTs.     

Contribution of Drugs Interfering with Protein and Cell Wall Synthesis to the Persistence of Pseudomonas aeruginosa Biofilms: An In Vitro Model

The occurrence of Pseudomonas aeruginosa (PA) persisters, including viable but non-culturable (VBNC) forms, subpopulations of tolerant cells that can survive high antibiotic doses, is the main reason for PA lung infections failed eradication and recurrence in Cystic Fibrosis (CF) patients, subjected to life-long, cyclic antibiotic treatments. In this paper, we investigated the role of subinhibitory concentrations of different anti-pseudomonas antibiotics in the maintenance of persistent (including VBNC) PA cells in in vitro biofilms. Persisters were firstly selected by exposure to high doses of antibiotics and their abundance over time evaluated, using a combination of cultural, qPCR and flow cytometry assays. Two engineered GFP-producing PA strains were used. The obtained results demonstrated a major involvement of tobramycin and bacterial cell wall-targeting antibiotics in the resilience to starvation of VBNC forms, while the presence of ciprofloxacin and ceftazidime/avibactam lead to their complete loss. Moreover, a positive correlation between tobramycin exposure, biofilm production and c-di-GMP levels was observed. The presented data could allow a deeper understanding of bacterial population dynamics during the treatment of recurrent PA infections and provide a reliable evaluation of the real efficacy of the antibiotic treatments against the bacterial population within the CF lung.     

Film Blowing of Biodegradable Polymer Nanocomposites for Agricultural Applications

Films for agricultural applications, such as greenhouses films or mulching films are generally made of polyolefins such as linear low-density polyethylene (LLDPE) or low-density polyethylene. However, the use of biodegradable and/or compostable polymers is increasing, which enjoy the additional advantage that they can be left on the site since a fine life would be gradually assimilated to the underlying soil. Nevertheless, biodegradable polymeric films often do not have suitable mechanical performances. In this work, biodegradable polymer-based nanocomposite films are prepared by film blowing and compared with traditional LLDPE based nanocomposites. In particular, a biodegradable polymer blend and two different inorganic nanofillers (an organo-modified clay and a calcium carbonate with a hydrophobic coating) are used for the preparation of the nanocomposites. A detailed investigation of obtained materials is performed through rheological, mechanical, and optical characterizations. Adding nanofillers led to an increase of rigidity and tear strength of blown films without negatively affecting their ductility.     

Peptides Derived from Angiogenin Regulate Cellular Copper Uptake

The angiogenin protein (ANG) is one of the most potent endogenous angiogenic factors. In this work we characterized by means of potentiometric, spectroscopic and voltammetric techniques, the copper complex species formed with peptide fragments derived from the N-terminal domain of the protein, encompassing the sequence 1-17 and having free amino, Ang1-17, or acetylated N-terminus group, AcAng1-17, so to explore the role of amino group in metal binding and cellular copper uptake. The obtained data show that amino group is the main copper anchoring site for Ang1-17. The affinity constant values, metal coordination geometry and complexes redox-potentials strongly depend, for both peptides, on the number of copper equivalents added. Confocal laser scanning microscope analysis on neuroblastoma cells showed that in the presence of one equivalent of copper ion, the free amino Ang1-17 increases cellular copper uptake while the acetylated AcAng1-17 strongly decreases the intracellular metal level. The activity of peptides was also compared to that of the protein normally present in the plasma (wtANG) as well as to the recombinant form (rANG) most commonly used in literature experiments. The two protein isoforms bind copper ions but with a different coordination environment. Confocal laser scanning microscope data showed that the wtANG induces a strong increase in intracellular copper compared to control while the rANG decreases the copper signal inside cells. These data demonstrate the relevance of copper complexes’ geometry to modulate peptides’ activity and show that wtANG, normally present in the plasma, can affect cellular copper uptake.     

Insoluble Vascular Amyloid Deposits Trigger Disruption of the Neurovascular Unit in Alzheimer’s Disease Brains

Alzheimer’s disease (AD) is a neurodegenerative disease, characterized histopathologically by intra-neuronal tau-related lesions and by the accumulation of amyloid β-peptide (Aβ) in the brain parenchyma and around cerebral blood vessels. According to the vascular hypothesis of AD, an alteration in the neurovascular unit (NVU) could lead to Aβ vascular accumulation and promote neuronal dysfunction, accelerating neurodegeneration and dementia. To date, the effects of insoluble vascular Aβ deposits on the NVU and the blood–brain barrier (BBB) are unknown. In this study, we analyze different Aβ species and their association with the cells that make up the NVU. We evaluated post-mortem AD brain tissue. Multiple immunofluorescence assays were performed against different species of Aβ and the main elements that constitute the NVU. Our results showed that there are insoluble vascular deposits of both full-length and truncated Aβ species. Besides, insoluble aggregates are associated with a decrease in the phenotype of the cellular components that constitute the NVU and with BBB disruption. This approach could help identify new therapeutic targets against key molecules and receptors in the NVU that can prevent the accumulation of vascular fibrillar Aβ in AD.     

Two-step sinter-crystallization of K2O–CaO–P2O5–SiO2 (45S5-K) bioactive glass

Bioactive glasses and glass-ceramics (GCs) effectively regenerate bone tissue, however most GCs show improved mechanical properties. In this work, we developed and tested a rarely studied bioactive glass composition (24.4K₂O-26.9CaO-46.1SiO₂-2.6P₂O₅ mol%, identified as 45S5-K) with different particle sizes and heating rates to obtain a sintered GC that combines good fracture strength, low elastic modulus, and bioactivity. We analyzed the influence of the sintering processing conditions in the elastic modulus, Vickers microhardness, density, and crystal phase formation in the GC. The best GC shows improved properties compared with its parent glass. This glass achieves a good densification degree with a two-step viscous flow sintering approach and the resulting GC shows as high bioactivity as that of the standard 45S5 Bioglass®. Furthermore, the GC elastic modulus (56 GPa) is relatively low, minimizing stress shielding. Therefore, we unveiled the glass sintering behavior with concurrent crystallization of this complex bioactive glass composition and developed a potential GC for bone regeneration.     

Increased Sediment Loads in Alpine Streams: An Integrated Field Study

The ecological impact of fine sediments is one of the major causes of ecological degradation affecting lotic systems. Interestingly, many studies have investigated the impact of increased sediment loads on specific compartments of the lotic system, but little or no information is available about the overall impact of sedimentation. Aim of this paper was to analyse the influence of fine sedimentation on allochthonous and autochthonous energy inputs and on the structural and functional characteristics of diatom and macroinvertebrate communities. Data were collected in two Alpine streams in NW Italy, one interested by the presence of an intense mining area and the other pristine, used as a control. The two rivers greatly differed in terms of suspended solids and bed load characteristics. From 10 stations, we analysed main physico‐chemical characteristics, fine sediment indicators (using 60 sediment traps), coarse particulate organic matter (CPOM) and photosynthetic pigments amounts, taxonomic and functional characteristics of macroinvertebrate communities. We tested several causal models via path analysis. Functional traits seem to better reflect the integrated impact originating from quarries in the river basin than traditional community metrics like total abundance and specific richness. This outcome was enforced through the co‐inertia analysis, which took in consideration also metrics based on diatom communities. Our study yielded quantitative relations between sediment loads induced by quarrying activities and the degree of biological impairment and suggests which metrics are more suitable to assess this specific impact. Copyright © 2015 John Wiley & Sons, Ltd.     

江苏省南水北调受水区水资源配置

在对水资源系统进行模拟分析的基础上,结合江苏省南水北调受水区水文水资源、水利工程等特点,构建流域降雨径流模型、水动力学模型、水量调配模型以及水工程调度模型等子模型,对受水区水资源量、供需水量等进行研究。基于所建模型提出水利工程调度方案,对研究区水资源进行合理配置。分别模拟计算分析研究区内农业、工业、生活、生态和船闸用水户在现状与规划工情下不同水平年的供水、需水、缺水情况,制定水资源配置方案。通过现状与规划方案对比可知,南水北调一期工程建成后供水能力提高,缺水量显著降低。95%、75%和50%保证率下,缺水率分别降低10.3%、8.0%和5.2%。研究成果为南水北调东线水利工程调度提供科学依据,对跨流域调水工程的水资源配置与调度具有一定参考意义。     

Characterization of bacteriocin-coated antimicrobial polyethylene films by atomic force microscopy

Antimicrobial agents can be used to give antimicrobial properties to polymeric materials used to envelope foods for packaging purposes. In this study, we exploited an atomic force microscopy (AFM) analysis for the characterization of plastic films activated with antimicrobial agents. The aim was to acquire information on the distribution of the antimicrobials on plastic materials with the ultimate scope of understanding the mechanisms of interaction between antimicrobials and materials to be used for food packaging. Four polyethylene films differing in linear, EVA, and erucamide content were activated by 3 different bacteriocins as antimicrobials, namely, nisin and bacteriocins Bac162W from Lactobacillus curvatus and BacAM09 from Lactobacillus plantarum. The spectrum of activity of the bacteriocins was assayed and shown to include several strains of Listeria monocytogenes. The plastic films were activated by a previously developed coating procedure and the surfaces of the active films were examined by AFM. In addition, roughness parameters related to the single surfaces were investigated by an appropriate software. Significant differences were found between the bacteriocin activated and control (nonactivated) films and the activated surfaces showed lower values of average roughness and surface area ratio. It was not always possible to obtain a homogeneous distribution of the bacteriocin preparation following the coating procedure. This result was dependent on the bacteriocin used and its distribution on the different plastic films. Overall, the bacteriocin Bac162W showed the most homogeneous distribution while surfaces treated with nisin, showing a sort of microtexturing, always gave the highest roughness values. Although the issue needs further investigation, the connection between AFM imaging, roughness, and antimicrobial distribution on active packaging showed the potential to improve the understanding of the interactions between plastic films and antimicrobial preparations that can be important for the innovation in food packaging and science.     

Validation of the performance of a GMO multiplex screening assay based on microarray detection

A new screening method for the detection and identification of GMO, based on the use of multiplex PCR followed by microarray, has been developed and is presented. The technology is based on the identification of quite ubiquitous GMO genetic target elements first amplified by PCR, followed by direct hybridisation of the amplicons on a predefined microarray (DualChip^® GMO, Eppendorf, Germany). The validation was performed within the framework of a European project (Co-Extra, contract no 007158) and in collaboration with 12 laboratories specialised in GMO detection. The present study reports the strategy and the results of an ISO complying validation of the method carried out through an inter-laboratory study. Sets of blind samples were provided consisting of DNA reference materials covering all the elements detectable by specific probes present on the array. The GMO concentrations varied from 1% down to 0.045%. In addition, a mixture of two GMO events (0.1% RRS diluted in 100% TOPAS19/2) was incorporated in the study to test the robustness of the assay in extreme conditions. Data were processed according to ISO 5725 standard. The method was evaluated with predefined performance criteria with respect to the EC CRL method acceptance criteria. The overall method performance met the acceptance criteria; in particular, the results showed that the method is suitable for the detection of the different target elements at 0.1% concentration of GMO with a 95% accuracy rate. This collaborative trial showed that the method can be considered as fit for the purpose of screening with respect to its intra- and inter-laboratory accuracy. The results demonstrated the validity of combining multiplex PCR with array detection as provided by the DualChip^® GMO (Eppendorf, Germany) for the screening of GMO. The results showed that the technology is robust, practical and suitable as a screening tool.