Aging Impairs Reverse Remodeling and Recovery of Ventricular Function after Isoproterenol-Induced Cardiomyopathy

Information about heart failure with reduced ejection fraction (HFrEF) in women and the potential effects of aging in the female heart is scarce. We investigated the vulnerability to develop HFrEF in female elderly mice compared to young animals, as well as potential differences in reverse remodeling. First, HF was induced by isoproterenol infusion (30 mg/kg/day, 28 days) in young (10-week-old) and elderly (22-month-old) female mice. In a second set of animals, mice underwent isoproterenol infusion followed by no treatment during 28 additional days. Cardiac remodeling was assessed by echocardiography, histology and gene expression of collagen-I and collagen-III. Following isoproterenol infusion, elderly mice developed similar HFrEF features compared to young animals, except for greater cell hypertrophy and tissue fibrosis. After beta-adrenergic withdrawal, young female mice experienced complete reversal of the HFrEF phenotype. Conversely, reversed remodeling was impaired in elderly animals, with no significant recovery of LV ejection fraction, cardiomyocyte hypertrophy and collagen deposition. In conclusion, chronic isoproterenol infusion is a valid HF model for elderly and young female mice and induces a similar HF phenotype in both. Elderly animals, unlike young, show impaired reverse remodeling, with persistent tissue fibrosis and cardiac dysfunction even after beta-adrenergic withdrawal.     

A New Multiplexed Real-Time PCR Assay to Detect <Emphasis Type="Italic">Campylobacter jejuni</Emphasis>, <Emphasis Type="Italic">C. coli</Emphasis>, <Emphasis Type="Italic">C. lari</Emphasis>, and <Emphasis Type="Italic">C. upsaliensis</Emphasis>

A new rapid method based on real-time PCR was developed to detect four thermophilic Campylobacter species (Campylobacter jejuni, Campylobacter coli, Campylobacter lari, and Campylobacter upsaliensis) in food samples. The assay targeted the bipA gene for C. upsaliensis and C. lari, whereas the gene encoding the ATP-binding protein CJE0832 was used to detect C. coli and C. jejuni. These genes were chosen for this assay due to their low variability and mutation rate at a species level. The multiplex PCR showed 100% inclusivity for all 25 thermophilic Campylobacter strains tested and 100% exclusivity for 38 non-targeted strains belonging to closely related species. The newly developed real-time PCR could detect down to 10² genomes/reaction and displayed efficiency above 97% for all species except for C. upsaliensis (90.1%). The method proved to be a reliable tool for food analysis, showing 100% sensitivity, 96% efficiency, and 92.45% specificity when validated against the gold standard method UNE-EN ISO 10272:2006 using 200 diverse food samples (meat, fish, fruits and vegetables, and raw milk). In artificially spiked samples, the detection limit of the method was 10 cfu/g in salad, 5 cfu/g in turkey meat, and 1 cfu/g in the rest of meat samples tested. Consequently, the newly designed molecular tool represents a quick and safe alternative to obtain reliable results concerning the presence/absence of the main thermophilic Campylobacter in any food sample.     

Biogas production in low-cost household digesters at the Peruvian Andes

Low-cost tubular digesters originally developed in tropical regions have been adapted to the extreme weather conditions of the Andean Plateau (3000-4000 m.a.s.l.). The aim of this study was to characterise biogas production in household digesters located at high altitude, operating under psychrophilic conditions. To this end, two pilot digesters were monitored and field campaigns were carried out in two representative digesters of rural communities. Digesters’ useful volume ranged between 2.4 and 7.5 m³, and hydraulic residence time (HRT) between 60 and 90 days. The temperature inside the digester’s greenhouse ranged between 20 and 25 °C. Treating cow manure, a specific biogas production around 0.35 m³ kg_VS⁻¹ was obtained, with some 65% CH₄ in biogas. In order to fulfil daily requirements for cooking and lighting, biogas production should be enhanced without increasing implementation costs as not to impede the expansion of this technology at household scale. In this sense, HRT below 60 days and OLR above 1 kg_VS m⁻³ day⁻¹ should be investigated to decrease digesters’ volume (i.e. costs) and increase biogas production rate. The adaptation of conventional gas burners to biogas characteristics can also contribute in improving the efficiency of the system.     

Efficient Transparent Thin Dye Solar Cells Based on Highly Porous 1D Photonic Crystals

A working electrode design based on a highly porous 1D photonic crystal structure that opens the path towards high photocurrents in thin, transparent, dye‐sensitized solar cells is presented. By enlarging the average pore size with respect to previous photonic crystal designs, the new working electrode not only increases the device photocurrent, as predicted by theoretical models, but also allows the observation of an unprecedented boost of the cell photovoltage, which can be attributed to structural modifications caused during the integration of the photonic crystal. These synergic effects yield conversion efficiencies of around 3.5% by using just 2 μm thick electrodes, with enhancements between 100% and 150% with respect to reference cells of the same thickness.     

Atrial Fibrillation in Heart Failure Is Associated with High Levels of Circulating microRNA-199a-5p and 22–5p and a Defective Regulation of Intracellular Calcium and Cell-to-Cell Communication

MicroRNAs (miRNAs) participate in atrial remodeling and atrial fibrillation (AF) promotion. We determined the circulating miRNA profile in patients with AF and heart failure with reduced ejection fraction (HFrEF), and its potential role in promoting the arrhythmia. In plasma of 98 patients with HFrEF (49 with AF and 49 in sinus rhythm, SR), differential miRNA expression was determined by high-throughput microarray analysis followed by replication of selected candidates. Validated miRNAs were determined in human atrial samples, and potential arrhythmogenic mechanisms studied in HL-1 cells. Circulating miR-199a-5p and miR-22-5p were significantly increased in HFrEF patients with AF versus those with HFrEF in SR. Both miRNAs, but particularly miR-199a-5p, were increased in atrial samples of patients with AF. Overexpression of both miRNAs in HL-1 cells resulted in decreased protein levels of L-type Ca²⁺ channel, NCX and connexin-40, leading to lower basal intracellular Ca²⁺ levels, fewer inward currents, a moderate reduction in Ca²⁺ buffering post-caffeine exposure, and a deficient cell-to-cell communication. In conclusion, circulating miR-199a-5p and miR-22-5p are higher in HFrEF patients with AF, with similar findings in human atrial samples of AF patients. Cells exposed to both miRNAs exhibited altered Ca²⁺ handling and defective cell-to-cell communication, both findings being potential arrhythmogenic mechanisms.     

Selecting Subpopulations of High-Quality Protein Conformers among Conformational Mixtures of Recombinant Bovine MMP-9 Solubilized from Inclusion Bodies

A detailed workflow to analyze the physicochemical characteristics of mammalian matrix metalloproteinase (MMP-9) protein species obtained from protein aggregates (inclusion bodies—IBs) was followed. MMP-9 was recombinantly produced in the prokaryotic microbial cell factories Clearcoli (an engineered form of Escherichia coli) and Lactococcus lactis, mainly forming part of IBs and partially recovered under non-denaturing conditions. After the purification by affinity chromatography of solubilized MMP-9, four protein peaks were obtained. However, so far, the different conformational protein species forming part of IBs have not been isolated and characterized. Therefore, with the aim to link the physicochemical characteristics of the isolated peaks with their biological activity, we set up a methodological approach that included dynamic light scattering (DLS), circular dichroism (CD), and spectrofluorometric analysis confirming the separation of subpopulations of conformers with specific characteristics. In protein purification procedures, the detailed analysis of the individual physicochemical properties and the biological activity of protein peaks separated by chromatographic techniques is a reliable source of information to select the best-fitted protein populations.     

Novel 4H-pyranylidene organic dyes for dye-sensitized solar cells: Effect of different heteroaromatic rings on the photovoltaic properties

Eight novel Ruthenium-free dyes consisting of a 4H-pyranylidene donor, a 2-cyanoacrylic acid acceptor and several heterocyclic rings with different electronic properties are designed and synthesized. The photovoltaic performances of the related dye-sensitized solar cells are discussed and compared, obtaining the best results with the thiophene followed by the mismatched-oriented thiazole. Dyes containing a pyrrol or a matched-oriented thiazole lead to the lower efficiencies of all the series. Charge extraction (CE) and transient photovoltage (TPV) measurements were conducted in order to investigate the recombination resistance and the difference in voltage for the devices. In order to get further insight in the electronic and optical properties of the studied compounds, theoretical calculations using TD-DFT and the CPCM have been carried out.     

IZO deposition by RF and DC sputtering on paper and application on flexible electrochromic devices

The present work describes indium-zinc oxide (IZO) sputtering depositions onto several types of papers, using radio-frequency (RF) and direct current (DC) sputtering with a ceramic IZO target. The electrical and optical properties of the resulting materials were optimized; by studying the argon and oxygen gas flow rates and the sputtering power effects. At optimal deposition conditions, thin films of IZO were achieved with a low sheet resistance (about 20 Ω/sq) and an optical transmittance of ca. 80% in the visible spectrum range. These materials retained these properties for more than 8 months. Electrochromic devices (ECDs) with several configurations were built with those conductive papers and life cycling and contrast were measured for the ECDs. These devices exhibited a very good color contrast (as defined using L^*a^*b^* color coordinates, = 32) and electrochromic cyclability up to 30,000 redox cycles.     

Estimating the industrial waste heat recovery potential based on CO<Subscript>2</Subscript> emissions in the European non-metallic mineral industry

Industrial waste heat (IWH) is a key strategy to improve energy efficiency and reduce CO₂ emissions in the industry. But its potential for different countries remains unclear due to a non-existent or inconsistent data basis. The objective of this paper is to assess the IWH potential of the European non-metallic mineral industry, using databases which comprise CO₂ emissions of more than 400 industrial sites as well as country- and sector-specific parameters. This sector is selected because of its homogenous nature, meaning that most sites carry out similar or the same processes, which facilitates site-level modelling with subsector-level assumptions. The bottom-up approach is employed to derive the IWH potential for this industry over the period 2007–2012. Average results in this period show an IWH potential per site of 0.33 PJ/a and a potential for the whole sector of 134 PJ/a. The countries with the largest IWH potentials are Germany, Italy, France and Spain with yearly average potentials of 23, 19, 17 and 16 PJ, respectively. The subsector with the most IWH potential is cement. Further work should focus on the improvement of methodologies to assess the IWH potential, in particular through a techno-economic assessment of links between IWH sources and potential sinks.     

汽车应用中的继电器驱动器

大多数面板安装的继电器由微处理器或其他敏感的电子设备驱动。一个良好的线图驱动电路要求在继电器和微处理器电路之间进行隔离。有效的驱动电路必须考虑到驱动电流和驱动电压的要求，以及有效的抑制L di/dt的瞬态过程，谈瞬态会损坏微处理器电路。虽然现在很容易就可以设计一个复杂、有效的驱动电路，但是今天的设计必须突出成本效益。在继电器中装入单片的IC驱动器可以为系统设计师提供显著的价值。本文描述安森美半导体的集成式继电器驱动器产品的工作原理，它可以使敏感的电子设备和机械继电器连接，以获得不同的控制／功率功能。本文还介绍了该器件的一些优点，如节约印刷电路板面积和减少元件数量。