Twin-image suppression in digital in-line holography based on wave-front filtering

Pattern Analysis and Applications - Digital holography is an imaging process able to recreate three-dimensional representations of objects from recording pattern interference among distinct waves....     

Bi-layer gelatin active films with “Pitanga” leaf hydroethanolic extract and/or natamycin in the second layer

Research on biopolymers-based active films produced with natural antioxidants and/or antimicrobials has gained attention over the last few years; however, anti-mold activity has been less studied than those of anti-bacteria. The aim of this work was the development and characterization of bi-layer films based on gelatin with natamycin and/or “Pitanga” leaf hydroethanolic extract in the second thin layer in order to determine the effects of these bioactive compounds on bi-layered film properties. The films were characterized regarding their moisture content and solubility in water, optical properties, microstructure, mechanical and thermal properties, water contact angle, water vapor permeability, UV/visible light transmission, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and antioxidant and anti-mold activities. Active films presented activity against Penicillium spp and Aspergillus niger and demonstrated antioxidant activity, as measured by ABTS ^•+ and DPPH ^• methods. Neither additive used in the films' second layer significantly affected the films' moisture content, thermal properties or the molecular interactions of the polymer matrix, assessed by FTIR, although some mechanical properties were affected, and the water contact angle. In conclusion, bi-layer films have reduced the quantity of additives required to maintain the antioxidant and anti-mold activities, as compared to similar monolayer films of the same thickness.     

Envelopes with microplastics generated from recycled plastic bags for crude oil sorption

Oil spill accidents in marine environments and the lack of disposal of post-consumer plastic are environmental problems worldwide. This study presents a sustainable alternative for both issues through envelopes filled with microplastics (MPs) from recycled bags for the sorption of spilled crude oil. Through particle size analysis by three different sieves (4, 9, and 20 mesh), different MP sizes were characterized by scanning electron microscope (SEM), Brunauer–Emmett–Teller (BET), density, contact angle (CA), and Fourier-transform infrared spectroscopy (FTIR). According to their sizes, the MPs were distributed in envelopes and submitted to crude oil sorption capacity and efficiency evaluation. Three MP particle sizes were obtained (from the largest to the smallest, according to the sieve mesh, MP4, MP9, and MP20). SEM images of samples exhibited irregular and porous surfaces, and MP4 had the smallest pore size (8.6 μm). BET showed that MP4 had the highest surface area (0.074 m²/g). The CA > 90° exposed that all samples were hydrophobic. FTIR spectrum demonstrated that the samples from the recycled bags were made of high density polyethylene (HDPE). The MP4 envelopes also had the best crude oil sorption results in capacity and efficiency (1.73 g/g and 68%, respectively), being a promising recycled sorbent in crude oil spillage applications.     

Decision support system for classifying archaeological pottery profiles based on Mathematical Morphology

We present a decision support system to help archaeologists in classifying wheel-made pottery pieces by its profile. A novel shape characterization method, using Mathematical Morphology, is introduced for this purpose. Each profile is represented as a vector, obtained by sampling the so called morphological curves (erosion, dilation, opening and closing), and Euclidean Distance is used as a similarity measure. We show results of our method applied to a profile database of Iberian Pottery from the upper valley of Guadalquivir River (Spain).     

Minimising total tardiness in the m-machine flowshop problem: A review and evaluation of heuristics and metaheuristics

In this work, a review and comprehensive evaluation of heuristics and metaheuristics for the m-machine flowshop scheduling problem with the objective of minimising total tardiness is presented. Published reviews about this objective usually deal with a single machine or parallel machines and no recent methods are compared. Moreover, the existing reviews do not use the same benchmark of instances and the results are difficult to reproduce and generalise. We have implemented a total of 40 different heuristics and metaheuristics and we have analysed their performance under the same benchmark of instances in order to make a global and fair comparison. In this comparison, we study from the classical priority rules to the most recent tabu search, simulated annealing and genetic algorithms. In the evaluations we use the experimental design approach and careful statistical analyses to validate the effectiveness of the different methods tested. The results allow us to clearly identify the state-of-the-art methods.     

Recognition of circular patterns on GPUs: Performance analysis and contributions

We develop a novel approach for computing the circle Hough transform entirely on graphics hardware (GPU). A primary role is assigned to vertex processors and the rasterizer, overshadowing the traditional foreground of pixel processors and enhancing parallel processing. Resources like the vertex cache or blending units are studied too, with our set of optimizations leading to extraordinary peak gain factors exceeding 358x over a typical CPU execution. Software optimizations, like the use of precomputed tables or gradient information and hardware improvements, like hyperthreading and multicores are explored on CPUs as well. Overall, the GPU exhibits better scalability and much greater parallel performance to become a solid alternative for computing the classical circle Hough transform versus those optimal methods run on emerging multicore architectures.     

Synthesis of symmetric and asymmetric singly terminated elliptic ladder filters for multiplexing applications

An extension of the Cauer ladder development for synthesizing singly terminated filters with symmetric and asymmetric responses is presented. Basically, a driving‐point immittance including reactive constant elements is carried out in such a way that provides the transmission zeros. The reactive constant elements are introduced into the synthesis for two reasons. The first is to consider the possibility of the asymmetric position of transmission zeros in the real frequency axis. The second one is to obtain canonical forms, i.e. networks with the minimum number of elements in the case of symmetrical responses. To validate the proposed method, a filter with asymmetrical response has been synthesized, comparing different topologies for its use in multiplexers. This fact is illustrated with a Ku‐band elliptic response diplexer designed in H‐plane rectangular waveguide. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2009.     

Effect of treatment with 13-cis-retinoic acid and ara-C on the hematopoietic stem cells of patients with myelodysplastic syndromes

PURPOSE: To assess the "in vivo" effect of 13-cis-retinoic acid and low dose Ara-C in MDS as well as to establish "in vitro" advantage of retinoid dose-related growth pattern on bone marrow cultures as defined by culture timing and CFU-GM proliferative response. PATIENTS AND METHODS: We evaluated 28 patients diagnosed of MDS according to FAB classification, of whom 4 cases had RA, 8 cases SRA, 14 cases RAEB and 2 cases RAEB-T. Patients who had RA and SRA were treated with oral 13-cis-retinoic acid at doses of 20-40 mg daily for 4 months and those cases with RAEB and RAEB-T had subcutaneous Ara-C at doses of 3 mg/m2 twice a day for 21 days. The "in vivo" and "in vitro" effect of retinoic acid on the haemopoietic differentiation was evaluated by the growth CFU-GM in semisolid cell culture methods. RESULTS: Increasing in vitro concentrations of 13-cis retinoic acid did not enhance the growth of myelodysplastic progenitors. Nevertheless, our study did not find any beneficial therapeutic effect of retinoic compounds in MDS patients. In this study, low-dose Ara-C (3 mg/m2) showed similar effects when compared with higher doses reported by others. Furthermore, in terms of CFU-GM proliferation the concentration of colonies before and after treatment were fairly similar in all but two patients. CONCLUSIONS: The results drawn from our study demonstrated that there is no beneficial advantage of 13-cis-retinoic acid as a differentiation inducing agent on myelodysplastic patients. In contrast, lower doses of Ara-C showed similar effects on haemopoiesis of MDS patients than standard doses of 10-20 mg/m2 but with less side effects.     

Dynamic fatigue behaviour of a steatite ceramic

Dynamic fatigue of a low dielectric loss steatite was investigated. To this end, the values of n and B, the so‐called subcritical crack growth (SCG) parameters were experimentally determined. The steatite exhibited the expected dynamic fatigue behaviour, so that the stress corrosion susceptibility parameter, n, of 24 was obtained. In addition, the material/environment parameter B, which is a constant for a given test environment, was also attained. These parameters are instrumental in predicting the lifetime of components under stress. When the applied load is such that the resulting strength equals half of the inert strength (σ_i), defined as the strength of a sample tested in an inert environment or at a fast stress rate, i.e. where no subcritical crack growth occurs, the time to failure (t_f) of the material was found to be ～140 h. Measurement of the fracture toughness of steatite is also of upmost importance and so it was determined using three test methods. A value of K_Ic = 1.91 ± 0.29 MPa m^1/2 was attained by the indentation fracture method through measurement of the cracks emanating from the Vickers indentation. This value is in good agreement with those determined using the K_Isc (surface crack in flexure) test method (2.21 ± 0.07 MPa m^1/2) and fractography analysis test method (2.00 ± 0.44 MPa m^1/2). Differences in test procedure and analysis causing the values from each test method to be different are discussed.