Study of the Photocrosslinking of Ethylene Propylene Diene Monomer Terpolymer Under UV Irradiation

The photocrosslinking of thick samples of 5-ethylidene-2-norbornene–ethylene propylene diene monomer (ENB-EPDM) under air at room temperature was investigated. First, a model study was carried out on low-molecular weight oligomers: squalene, 1,2-polybutadiene, and 1,4-polybutadiene. Several crosslinking agents (meth(acrylics), bismaleimide, and thiol) combined with various photoinitiators were tested to improve the reactivity of these oligomers under UV irradiation. Gel contents, crosslinking densities, viscosities, and viscoelastic properties were measured in order to characterize the extent of crosslinking. Acrylate-based crosslinking agents appeared to be the most reactive species and these results were then applied to a low-molecular weight EPDM. Several photoinitiators were tested and benzophenone turned out to be the most efficient photoinitiator when combined with trimethylolpropane triacrylate. Finally, a commercial EPDM was subsequently photocrosslinked and high gel content and crosslinking density were obtained after only 2 min of irradiation. POLYM. ENG. SCI., 60:95–103, 2020. © 2019 Society of Plastics Engineers     

[4.3.1]Bicyclic FKBP Ligands Inhibit Legionella Pneumophila Infection by LpMip-Dependent and LpMip-Independent Mechanisms**

Legionella pneumophila is the causative agent of Legionnaires’ disease, a serious form of pneumonia. Its macrophage infectivity potentiator (Mip), a member of a highly conserved family of FK506-binding proteins (FKBPs), plays a major role in the proliferation of the gram-negative bacterium in host organisms. In this work, we test our library of >1000 FKBP-focused ligands for inhibition of LpMip. The [4.3.1]-bicyclic sulfonamide turned out as a highly preferred scaffold and provided the most potent LpMip inhibitors known so far. Selected compounds were non-toxic to human cells, displayed antibacterial activity and block bacterial proliferation in cellular infection-assays as well as infectivity in human lung tissue explants. The results confirm [4.3.1]-bicyclic sulfonamides as anti-legionellal agents, although their anti-infective properties cannot be explained by inhibition of LpMip alone.     

Simulation Based Investigation of Triple Heterojunction TFET (THJ-TFET) for Low Power Applications

Silicon - We designed a new model tunnel field-effect transistor (TFET) based on Triple Heterojunction Tunnel Field Effect Transistor (THJ-TFET) is investigated and designed in this paper. This...     

Bacterial Dehydrogenases Facilitate Oxidative Inactivation and Bioremediation of Chloramphenicol

Antimicrobial resistance represents a major threat to human health and knowledge of the underlying mechanisms is therefore vital. Here, we report the discovery and characterization of oxidoreductases that inactivate the broad-spectrum antibiotic chloramphenicol via dual oxidation of the C3-hydroxyl group. Accordingly, chloramphenicol oxidation either depends on standalone glucose-methanol-choline (GMC)-type flavoenzymes, or on additional aldehyde dehydrogenases that boost overall turnover. These enzymes also enable the inactivation of the chloramphenicol analogues thiamphenicol and azidamfenicol, but not of the C3-fluorinated florfenicol. Notably, distinct isofunctional enzymes can be found in Gram-positive (e. g., Streptomyces sp.) and Gram-negative (e. g., Sphingobium sp.) bacteria, which presumably evolved their selectivity for chloramphenicol independently based on phylogenetic analyses. Mechanistic and structural studies provide further insights into the catalytic mechanisms of these biotechnologically interesting enzymes, which, in sum, are both a curse and a blessing by contributing to the spread of antibiotic resistance as well as to the bioremediation of chloramphenicol.     

Synthesis and characterization of polyethylene-like polyurethanes derived from long-chain, aliphatic α,ω-diols

Long-chain aliphatic α,ω-diols containing up to 32 consecutive methylene groups were synthesized by several methods and characterized. 1,22-Docosanediol HO-(CH₂)₂₂-OH and 1,32-dotriacontanediol HO-(CH₂)₃₂-OH both exhibited a solid-solid phase transition before melting. The α,ω-diols HO-(CH₂)_m-OH, where m=12, 22, or 32, were reacted in the melt with much shorter aliphatic α,ω-diisocyanates OCN-(CH₂)_n-NCO, where n=4, 6, 8, or 12, producing a series of linear, aliphatic, and increasingly polyethylene-like m,n-polyurethanes. Characterization (by DSC, TGA, and SAXS) of the m,n-polyurethane series showed that when the aliphatic segments were increased, and the hydrogen-bonding densities thus decreased, the polymers displayed physical and thermal properties (for example, solubility and melting temperature) typical of polyethylene.     

Effect of fish oil on the fatty acid composition of human milk and maternal and infant erythrocytes

To examine the effect of fish oil supplementation on the fatty acid (FA) composition of human milk and maternal and infant erythrocytes, five lactating women were supplemented with 6 g of fish oil daily for 21d. Usual maternal diets contained 1,147 mg of total n−3 FA, with 120 mg from very long-chain (>C₁₈) n−3 FA. Supplementation increased dietary levels to 3,092 mg of total n−3 FA and 2,006 mg of very long-chain n−3 FA. Milk samples were collected daily, prior to fish oil ingestion, and at 4-h intervals on days 1, 7, 14 and 21. Milk n−3 FA content increased within 8 h and reached steady state levels within one week. The n−6 fatty acid content decreased. Erythrocyte eicosapentaenoic acid content increased from 0.24% to 1.4% (P<0.01) in mothers and from 0.11% to 0.70% (P<0.05) in infants. Docosapentaenoic acid increased from 1.4% to 2.2% (P<0.05) in mothers and from 0.30% to 0.78% (P<0.01) in infants. There was no significant change in docosahexaenoic acid or n−6 fatty acid content. Maternal platelet aggregation responses were variable. No differences in milk or plasma tocopherol levels were noted. Based on a paper presented at the Symposium on Milk Lipids held at the AOCS Annual Meeting, Baltimore, MD, April 1990.     

Feeding stimulatory and inhibitory chemicals from an acceptable nonhost plant forManduca sexta: Improved detection by larvae deprived of selected chemosensory organs

The chemical basis of feeding responses to the acceptable nonhost plantVigna sinensis (cowpea) by larvae ofManduca sexta was investigated using chemical isolation techniques directed by a novel chemosensory-based bioassay. The presence of feeding stimulatory and inhibitory compounds in leaves or leaf extracts was determined in a two-choice preference test using leaf disks or glass fiber filter paper disks laced with leaf extract as test substrate and filter paper disks laced with water as control. Larvae strongly prefer the control disks over leaf disks, indicating the presence of feeding inhibitory compounds in the leaf. An ethanol extract of both fresh and dried leaves neither stimulated nor inhibited feeding. The cause of this inactivity was examined by using larvae that respond strongly to either feeding stimulatory or inhibitory compounds due to selective chemosensory deprivation. Larvae having chemosensory organs remaining only on the maxillary palps are stimulated to feed by whole leaf disks and by the ethanol extracts. In contrast, larvae having only the medial and lateral maxillary sensilla styloconica and the epipharyngeal sensilla remaining are strongly inhibited by whole leaf disks and the ethanol extract of fresh leaves. Thus, the ethanol extract contains both feeding stimulatory and inhibitory compounds, which elicit opposite behavioral effects in unoperated larvae, therefore nullifying any stimulatory and inhibitory activity. These compounds can only be demonstrated by using discrimination-enhanced larvae in the choice tests. Further isolation of the feeding stimulatory principle inV. sinensis yielded two separate fractions of neutral compounds, suggesting at least two different chemicals belonging to two different classes: nonpolar and polar lipids. Feeding inhibitory chemicals have apparently polar properties because strong activity was found in the ethyl acetate and methanol extracts of dried leaves. The role of feeding stimulatory and inhibitory compounds in food selection ofM. sexta larvae is discussed.     

Study of the telomerization of dimethylaminoethyl methacrylate (DMAEMA) with mercaptoethanol. Application to the synthesis of a new macromonomer

The telomerization of dimethylaminoethyl methacrylate (DMAEMA) with mercaptoethanol initiated by 2,2′-azobisisobutyronitrile was first investigated at 70 °C and the influence of the type of solvent was studied. The results showed that well-defined telomers of DMAEMA could not be synthetized via telomerization of DMAEMA in water or water/acetonitrile mixture since the telomerization reaction is in competition with the nucleophilic addition of thiol onto the monomer. Transfer constants for mercaptoethanol in benzene and acetonitrile were determined by Mayo's and O'Brien's methods. The transfer constant obtained in acetonitrile (0,6) was higher than that obtained in benzene. This difference can be explained by the fact that the thiol was consumed by two reactions: nucleophilic addition and telomerization. The influence of solvents on the polymerization kinetics was enlightened. These results were applied to the synthesis of macromonomers of DMAEMA with isocyanatoethyl methacrylate (IEM). These macromonomers were copolymerized with styrene.     

Study of compatibilization of HDPE–PET blends by adding grafted or statistical copolymers

The reactive compatibilization of blends of HDPE–PET [high‐density polyethylene–poly(ethylene terephthalate)] was investigated in this study. The compatibilizers used were two grafted copolymers prepared by reactive extrusion containing 1.20–2.30 wt % GMA such as HDPE‐g‐GMA and one statistical copolymer containing 1 wt % GMA such as Lotader AX8920. HDPE was successfully functionalized using a melt free‐radical grafting technique. Grafting was initiated in two ways: adding an initiator in the polymer–monomer mixture or activation by ozone of polymer. Ozonization of HDPE by the introduction of a peroxide lead to a better grafting yield and to better grafting efficiency of the samples. The effects of the three compatibilizers were evaluated by studying the morphology and the thermal and mechanical properties of HDPE–PET (70/30 wt %) blends. Significant improvements were observed, especially in morphology, elongation at break, and Charpy impact strength of the compatibilized blends. A more pronounced compatibilizing effect was obtained with the statistical copolymer, for which the elongation at break and the impact strength were increased by 100%, while the uncompatibilized blends showed a 60% decrease in the Young's modulus and the strength at break. We also were able to show that the grafting yield increase of 1.20–2.30 wt % of GMA did not affect the properties of the blends because the grafted copolymers possess very similar chemical structures. However, compatibilization of blends with grafted copolymers is an interesting method, particularly for recycled blends, because the synthesis of these compatibilizers is easy and cheap in comparison to statistical copolymer. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2377–2386, 2001