N,N′-alkylated Imidazolium-Derivatives Act as Quorum-Sensing Inhibitors Targeting the Pectobacterium atrosepticum-Induced Symptoms on Potato Tubers

Bacteria belonging to the Pectobacterium genus are the causative agents of the blackleg and soft-rot diseases that affect potato plants and tubers worldwide. In Pectobacterium, the expression of the virulence genes is controlled by quorum-sensing (QS) and N-acylhomoserine lactones (AHLs). In this work, we screened a chemical library of QS-inhibitors (QSIs) and AHL-analogs to find novel QSIs targeting the virulence of Pectobacterium. Four N,N′-bisalkylated imidazolium salts were identified as QSIs; they were active at the μM range. In potato tuber assays, two of them were able to decrease the severity of the symptoms provoked by P. atrosepticum. This work extends the range of the QSIs acting on the Pectobacterium-induced soft-rot disease.     

Lithium conducting solid electrolyte Li1.3Al0.3Ti1.7(PO4)3 obtained via solution chemistry

NaSICON-type lithium conductor Li_1.3Al_0.3Ti_1.7(PO₄)₃ (LATP) is synthesized with controlled grain size and composition using solution chemistry. After thermal treatment at 850 °C, sub-micronic crystallized powders with high purity are obtained. They are converted into ceramic through Spark Plasma Sintering at 850–1000 °C. By varying the processing parameters, pellet with conductivities up to 1.6 × 10^?4 S/cm with density of 97% of the theoretical density have been obtained. XRD, FEG-SEM, ac-impedance and Vickers indentation were used to characterize the products. The influence of sintering parameters on pellet composition, microstructure and conductivity is discussed in addition to the analysis of the mechanical behavior of the grains interfaces.     

Processing and properties of transparent hydroxyapatite and β tricalcium phosphate obtained by HIP process

Stoichiometric β-tricalcium phosphate (β-TCP) and hydroxyapatite (HA) powders were synthesized by chemical precipitation of aqueous solutions of diammonium phosphate and calcium nitrate. After a calcination treatment and a milling step, the powders were shaped by slip casting. The sintering temperature effect on the relative density and the average grain size was investigated. By natural sintering at 1200 and 1120 °C, densities of 98% and 99% were obtained for HA and TCP, respectively. After determination of minimum temperatures to obtain only closed porosity and a pre-sintering at these temperatures, hot isostatic pressing (HIP) treatment was carried out. Transparent or translucent samples were obtained, indicating a relative density very close to the theoretical value (>99.9%). Mechanical properties (three-point bending strength, fracture toughness, Young's modulus and Vickers hardness) were measured on both materials with similar grain size (～ 1 μm). Bending strengths of 181 and 105 MPa were measured for TCP and HA, respectively.     

Relationship Between Structure and Glass Transition Temperature in Low-silica Calcium Aluminosilicate Glasses: the Origin of the Anomaly at Low Silica Content

The anomalous behavior of the glass transition temperature ( T _g) in low silica calcium aluminosilicate glasses has been related to the structural modifications observed by neutron and X-ray diffraction. The diffraction data indicate that Al and Si are in tetrahedral sites and that Ca atoms are in distorted octahedral sites. By subtracting the correlation functions for glasses at constant SiO₂ or constant Al₂O₃ content, we have shown that Si and Al atoms are introduced in a different way within the glass structure. Si is present in various Q ⁿ sites, while Al resides in Q³ and Q⁴ sites for glasses with high CaO content and enters fully polymerized Q⁴ sites with increasing SiO₂ or Al₂O₃ content. The higher proportion of Al in Q³ positions at high CaO content yields a depolymerization of the network. The lower connectivity will contribute to a decrease of the viscosity, which may be at the origin of the decrease of T _g for glasses at low silica content.     

Autogenous shrinkage of concrete: a balance between autogenous swelling and self-desiccation

According to physical analyses, the driving force of autogenous shrinkage of concrete is the change in the capillary pressure induced by self-desiccation in its cement matrix. Self-desiccation is caused by the balance between the absolute volume reduction (chemical shrinkage) and the building up of the capillary network. The aim of this study was to quantify the influence of the cement characteristics on the chain of mechanisms leading from hydration to autogenous deformations. Four parameters were selected: (i) for clinker, the amount of C₃A and free lime and the SO₃/K₂O ratio; (ii) for cement, the fineness. To master the experimental area, 16 cements were prepared at the laboratory from pure raw materials. An important number of characterizing techniques were used in the experimental study. Their choice was based on the important parameters drawn from the physical analysis: setting time, suspension-solid transition, hydration kinetics through isothermal calorimetry and nonevaporable water, chemical shrinkage, evolution of relative humidity, capillary porosity and autogenous shrinkage. Using different techniques allowed to determine the precise mechanism of action of each parameter. Results showed that these mechanisms are generally different, even if their macroscopic consequences may be identical. This point will probably be useful for modeling and determining the industrial keys reducing the autogenous shrinkage. The physical mechanisms involved in autogenous deformations were further understood. In particular, this study shows that initial autogenous shrinkage should be considered as a balance between the self-desiccation and an initial swelling phase. The influence of the four parameters considered on this last phenomenon were also characterized.     

Methane calibration burner and C‐factor determination with cone calorimeter – validation of the standardized calibration protocol

The cone calorimeter is one of the major fire tests. In its reference standard ISO 5660‐1, the apparatus (and especially a characteristic of its orifice plate mass flow meter, called C‐Factor) is calibrated using a methane burner set at 5 kW. However, measurements performed in end‐use are in the range 1–10 kW. In addition, standard proposes to check linearity at 1 and 3 kW, which means in the lowest part of the range. This communication establishes the validation of the linearity on the whole range and determines the optimal condition for C‐factor determination. It justifies the technical choices of the standard. Copyright © 2014 John Wiley & Sons, Ltd.     

Experimental study and numerical modeling of mixing by air injection in yield stress fluids using the OpenFOAM software

Mixing by gas injection is an operation used in industrial processes such as wastewater treatment, metallurgy, or methanization in which pressurized gas is injected into a fluid in order to reduce concentrations and temperatures gradients. This study demonstrates how the CFD toolbox OpenFOAM can be used to simulate such flows. Experimental measurements and observations have been performed on a pilot-scale reactor where pressurized air is injected in a yield stress fluid. The volume of fluid method and an adaptive mesh with refinement at the interface have been used to track the gas inclusions. The numerical model accuracy has been assessed by comparing experimental and numerical results related to the bubble's frequency, dimensions, and rising velocities as well as the fluid recirculation, yielded, and unyielded regions in the tank. The influence of injection parameters such as the injection flow rate and the fluid rheological parameters has been quantified.     

Palladium‐Catalyzed [2+1] Cycloadditions Affording Vinylidenecyclopropanes as Precursors of 7‐Membered Carbocycles

Palladium(II) acetate in association with secondary phosphine oxides provides an efficient catalytic system for [2+1] cycloadditions starting from oxanorbornene derivatives and tertiary propargyl esters giving rise to vinylidenecyclopropanes. This reaction is specific to bidentate phosphinito–phosphinous acid ligands generated from secondary phosphine oxides. The [2+1] cycloaddition was found broad in scope with a high tolerance to various functional groups. Moreover, vinylidenecyclopropanes were straightforwardly converted into oxabicyclo[3.2.1]oct‐2‐ene derivatives through a palladium‐catalyzed ring‐expansion. Finally, the oxa bridge cleavage of oxatricyclic compounds yields functionalized 7‐membered carbocycles.

     

Irreversible changes in protein conformation due to interaction with superparamagnetic iron oxide nanoparticles

The understanding of the interactions between nanomaterials and proteins is of extreme importance in medicine. In a biological fluid, proteins can adsorb and associate with nanoparticles, which can have significant impact on the biological behavior of the proteins and the nanoparticles. We report here on the interactions of iron saturated human transferrin protein with both bare and polyvinyl alcohol coated superparamagnetic iron oxide nanoparticles (SPIONs). The exposure of human transferrin to SPIONs results in the release of iron, which changes the main function of the protein, which is the transport of iron among cells. After removal of the magnetic nanoparticles, the original protein conformation is not recovered, indicating irreversible changes in transferrin conformation: from a compact to an open structure.