Microcellular foaming of poly(lactic acid) branched with food-grade chain extenders

This study evaluated the effectiveness and efficiency of two food-grade multifunctional epoxies chain extenders (CE) in branching PLA and improving its foamability. Both CE grades were effective in branching PLA causing increased end mixing torque, shear, elongational viscosities, molecular weight but decreased crystallinity of poly(lactic acid) (PLA) with CE content, due to chain entanglements. CE with low epoxy equivalent weight (EEW) was more efficient than the counterpart with high EEW due to its high reactivity. Neat PLA foams showed poor cell morphology with areas without nucleated cells and had a low expansion, owing to its low elongational viscosity. By contrast, there was a considerable change in the morphology of the PLA foam structure caused by its branching. Chain-extended PLA foams had uniform cell morphology with a high void fraction (up to ~85%) and expansion ratio (an eightfold expansion over unfoamed PLA) due to their high elongational viscosities, suggesting that melt properties of branched PLA were appropriate for optimum cell growth and stabilization during foaming. Overall, CE with low EEW was the most effective grade and 0.25% the optimum content that provided appropriate melt viscosity to produce PLA foams with a homogeneous structure, fine cells, high void fraction, high volume expansion ratio, and cell-population density.     

The Esterase PfeE,the Achilles’ Heel in the Battle for Iron between Pseudomonas aeruginosa and Escherichia coli

Bacteria access iron, a key nutrient, by producing siderophores or using siderophores produced by other microorganisms. The pathogen Pseudomonas aeruginosa produces two siderophores but is also able to pirate enterobactin (ENT), the siderophore produced by Escherichia coli. ENT-Fe complexes are imported across the outer membrane of P. aeruginosa by the two outer membrane transporters PfeA and PirA. Iron is released from ENT in the P. aeruginosa periplasm by hydrolysis of ENT by the esterase PfeE. We show here that pfeE gene deletion renders P. aeruginosa unable to grow in the presence of ENT because it is unable to access iron via this siderophore. Two-species co-cultures under iron-restricted conditions show that P. aeruginosa strongly represses the growth of E. coli as long it is able to produce its own siderophores. Both strains are present in similar proportions in the culture as long as the siderophore-deficient P. aeruginosa strain is able to use ENT produced by E. coli to access iron. If pfeE is deleted, E. coli has the upper hand in the culture and P. aeruginosa growth is repressed. Overall, these data show that PfeE is the Achilles’ heel of P. aeruginosa in communities with bacteria producing ENT.     

Population-level modeling to account for multigenerational effects of uranium in Daphnia magna

As part of the ecological risk assessment associated with radionuclides in freshwater ecosystems, toxicity of waterborne uranium was recently investigated in the microcrustacean Daphnia magna over a three-generation exposure (F0, F1, and F2). Toxic effects on daphnid life history and physiology, increasing over generations, were demonstrated at the organism level under controlled laboratory conditions. These effects were modeled using an approach based on the dynamic energy budget (DEB). For each of the three successive generations, DEBtox (dynamic energy budget applied to toxicity data) models were fitted to experimental data. Lethal and sublethal DEBtox outcomes and their uncertainty were projected to the population level using population matrix techniques. To do so, we compared two modeling approaches in which experimental results from F0, F1, and F2 generations were either considered separately (F0-, F1-, and F2-based simulations) or together in the actual succession of F0, F1, and F2 generations (multi-F-based simulation). The first approach showed that considering results from F0 only (equivalent to a standard toxicity test) would lead to a severe underestimation of uranium toxicity at the population level. Results from the second approach showed that combining effects in successive generations cannot generally be simplified to the worst case among F0-, F1-, and F2-based population dynamics.     

Chalcogenide Glasses for Infrared Photonics

The last advances in the synthesis and shaping techniques of chalcogenide glasses suitable for infrared photonics are reported. Ball milling combined with spark plasma sintering allows the preparation of bulk chalcogenide glasses at lower temperature and at lower cost. Microstructuring of optical fibers results in enhanced nonlinear properties leading to the demonstration of low-threshold Brillouin laser at 1.55 μm, all-optical wavelength conversion and time-domain demultiplexing with a 170 Gb/s rate, and supercontinuum between 1.5 and 2.8 μm. The potential of integrated waveguides for functions such as near-IR sensing, mid-IR injection, and (bio)-chemical functionalization is shown.     

EXPERIMENTAL INFRARED DRYING STUDY OF A MODEL WATER-BASED EPOXY-AMINE PAINTING COATED ON IRON SUPPORT

The aim of this work is to study the infrared drying and curing kinetics of a model water-based epoxy-amine painting coaled on iron support. After a presentation of the model painting elaborated in our laboratory, experimental and theoretical data of the curing kinetics are presented. Then, we described the special laboratory-scale infrared dryer set up in our laboratory. This dryer was able to carry on drying experiments with uniform infrared flux densities between 0 to 25 kW,m^-2 The study of the painting drying as a function of the infrared flux density and of the film thickness shows the influence of these two main physical parameters.     

Growth and characterization of gold catalyzed SiGe nanowires and alternative metal-catalyzed Si nanowires

The growth of semiconductor (SC) nanowires (NW) by CVD using Au-catalyzed VLS process has been widely studied over the past few years. Among others SC, it is possible to grow pure Si or SiGe NW thanks to these techniques. Nevertheless, Au could deteriorate the electric properties of SC and the use of other metal catalysts will be mandatory if NW are to be designed for innovating electronic. First, this article's focus will be on SiGe NW's growth using Au catalyst. The authors managed to grow SiGe NW between 350 and 400°C. Ge concentration (x) in Si1-xGex NW has been successfully varied by modifying the gas flow ratio: R = GeH4/(SiH4 + GeH4). Characterization (by Raman spectroscopy and XRD) revealed concentrations varying from 0.2 to 0.46 on NW grown at 375°C, with R varying from 0.05 to 0.15. Second, the results of Si NW growths by CVD using alternatives catalysts such as platinum-, palladium- and nickel-silicides are presented. This study, carried out on a LPCVD furnace, aimed at defining Si NW growth conditions when using such catalysts. Since the growth temperatures investigated are lower than the eutectic temperatures of these Si-metal alloys, VSS growth is expected and observed. Different temperatures and HCl flow rates have been tested with the aim of minimizing 2D growth which induces an important tapering of the NW. Finally, mechanical characterization of single NW has been carried out using an AFM method developed at the LTM. It consists in measuring the deflection of an AFM tip while performing approach-retract curves at various positions along the length of a cantilevered NW. This approach allows the measurement of as-grown single NW's Young modulus and spring constant, and alleviates uncertainties inherent in single point measurement.     

In‐line near infrared spectroscopy monitoring of pharmaceutical powder moisture in a fluidised bed dryer: An efficient methodology for chemometric model development

This work proposes a novel chemometric methodology for in‐line near infrared spectroscopy (NIRS) monitoring of pharmaceutical powder moisture in a fluidised‐bed dryer. The collected spectra are analysed by multivariate chemometrics involving the preparation of numerous laboratory samples. A different methodology, using only plant samples, was tested in real‐time. A specially designed probe tip, allowing for robust in‐situ spectral acquisition, was designed. The results prove that NIRS can be as efficient as traditional quality analyses, e.g. loss‐on‐drying, in measuring powder moisture content in a fluidised bed dryer with a calibration model based only on plant samples. © 2011 Canadian Society for Chemical Engineering     

Energiedissipation und Energieflüsse während des Tablettiervorganges

The tableting process causes a temperature increase due to dissipation of energy. Therefore, with time the temperature of the tablets and the tablet press increases. Depending on the calculated tablet temperature, this temperature increase is discussed for different compression forces and lubricant concentrations. Two different measurement techniques are presented and compared.     

Nanocomposite piezoelectric films of P(VDF‐TrFE)/LiNbO3

Piezoelectric films were prepared by incorporation of lithium niobate (LiNbO₃) nanoparticles into copolymer of vinylidene difluoride and trifluoroethylene. Nanoparticles of LiNbO₃ with ferroelectric phase were successfully synthesized and dispersed homogenously by ultrasonication in the copolymer matrix without any surfactant or surface functionalization. The nanocomposites were fully characterized by electronic microscopy, X‐ray diffraction, differential scanning calorimetry, dynamical mechanical analysis, and piezometer. Surprisingly, the copolymer matrix crystallinity and morphology were not affected by the incorporation of nanoparticles. Therefore the nanocomposites remained good mechanicals properties and high ferroelectricity coupled to nonlinear optical activity thanks to the noncentro symmetric space group of lithium niobate. This could be a novel approach to develop new multifunctional materials. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013