Ring‐opening bulk polymerization of five‐ and six‐membered cyclic phosphonates using maghnite,a nontoxic proton exchanged montmorillonite clay

A new method of preparation of poly(alkylene H‐phosphonate)s by ring‐opening bulk polymerization of the five‐ and six‐membered cyclic phosphonates monomers using the nontoxic Maghnite‐H⁺ as the initiator is described. Cyclic phosphonate monomers have been first synthesized. In particular, a new one‐step synthesis of 2‐hydro‐2‐oxo‐1,3,2‐dioxaphospholane is reported with a yield of 70%. The efficiency of the montmorillonite sheet silicate clay which exchanged with protons, called Maghnite‐H⁺, as cationic initiator has been proved and the resulting biomimetic poly(alkylene H‐phosphonate)s have been characterized. The Maghnite‐H⁺ regenerated after one turn‐over has showed to be still efficient as initiator for the ring‐opening polymerization. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Thermal and mechanical properties of polypropylene/wood‐flour composites

In this research, polypropylene/wood‐flour composites (WPCs) were blended with different contents of wood and/or maleated polypropylene (MAPP) and clay. We found that the addition of MAPP or clay in the formulation greatly improved the dispersion of the wood fibers in the composite; this suggested that MAPP or clay may have played the role of an adhesion promoter in the WPCs. The results obtained with clay indicate that it also acted as a flame retardant. The thermal tests carried out with the produced samples showed an increased crystallization temperature (T_c), crystallinity, and melting temperature (T_m) with wood loading. The increase of the two former parameters was explained by the incorporation of wood flour, which played the role of nucleating agent and induced the crystallization of the matrix polymer. On the other hand, the T_m increase was ascribed to the insulating properties of wood, which hindered the movement of heat conduction. The effects of UV irradiation on T_m and T_c were also examined. T_c increased with UV exposure time; this implied that UV degradation generated short chains with low molecular weight that could move easily in the bulk of the sample and, thus, catalyze early crystallization. The flexural strength and modulus increased with increasing wood‐flour content. In contrast, the impact strength and tensile strength and strain decreased with increasing wood‐flour content. All of these changes were related to the level of dispersion of the wood flour in the polymeric matrix. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Mechanics-aided digital image correlation for the investigation of piezoelectric and ferroelectric behaviour of a soft PZT

The strain response of a polarised PZT was characterised using Digital Image Correlation (DIC). The DIC algorithm is based on a global approach and regularises the displacement field using the balance equations of solid mechanics. The measurement error is reduced by correcting the displacements that are mechanically not admissible. A ferroelectric test showed that the standard deviations of strain fields remain mostly under 1.2 × 10^?4 for an element size of 64 px. The standard deviation on the average value is 3 × 10^?6. The strain field is homogeneous and its average value is consistent with the strain obtained from a CCD laser measurement device. The longitudinal strain, transverse strain and polarisation response of the PZT were measured for bipolar and unipolar loadings ranging from 50 to 5000 V/mm. Material properties were extracted from these measurements. This work shows the advantages of a novel 2D-DIC algorithm for piezoelectric strain characterisation.     

Chalcogenide Glasses for Infrared Photonics

The last advances in the synthesis and shaping techniques of chalcogenide glasses suitable for infrared photonics are reported. Ball milling combined with spark plasma sintering allows the preparation of bulk chalcogenide glasses at lower temperature and at lower cost. Microstructuring of optical fibers results in enhanced nonlinear properties leading to the demonstration of low-threshold Brillouin laser at 1.55 μm, all-optical wavelength conversion and time-domain demultiplexing with a 170 Gb/s rate, and supercontinuum between 1.5 and 2.8 μm. The potential of integrated waveguides for functions such as near-IR sensing, mid-IR injection, and (bio)-chemical functionalization is shown.     

EXPERIMENTAL INFRARED DRYING STUDY OF A MODEL WATER-BASED EPOXY-AMINE PAINTING COATED ON IRON SUPPORT

The aim of this work is to study the infrared drying and curing kinetics of a model water-based epoxy-amine painting coaled on iron support. After a presentation of the model painting elaborated in our laboratory, experimental and theoretical data of the curing kinetics are presented. Then, we described the special laboratory-scale infrared dryer set up in our laboratory. This dryer was able to carry on drying experiments with uniform infrared flux densities between 0 to 25 kW,m^-2 The study of the painting drying as a function of the infrared flux density and of the film thickness shows the influence of these two main physical parameters.     

Poly(L‐lactic acid) with added α‐tocopherol and resveratrol: optical,physical, thermal and mechanical properties

Poly(L ‐lactic acid) (PLLA) films containing various concentrations of two natural antioxidants, α‐tocopherol and resveratrol, were fabricated by a melt compounding and compression molding process. The influence of the antioxidants on the optical properties such as color and UV‐visible light transmission was analyzed. The thermal, mechanical, rheological and physical properties of PLLA films with added antioxidants were assessed. PLLA films with added α‐tocopherol and resveratrol showed a yellowish brown color and the lightness was influenced by the presence of the antioxidants. The glass transition and melting temperatures were significantly reduced with the addition of antioxidants while enhanced thermal stability was observed, which could be a benefit and important for processing and production. PLLA films with added antioxidants were slightly more hydrophobic than neat PLLA. The combination effect of plasticizing and enhancement of the elastic modulus with differing concentrations of two antioxidants played a critical role in the mechanical and thermomechanical properties of PLLA films. The melt viscosity of the PLLA films with added antioxidants was substantially higher than that of neat PLLA. The higher melt viscosity and G′(ω) could be an indication of formation of entanglement between PLLA and the two antioxidants. Copyright © 2012 Society of Chemical Industry     

High performance HTLNR/epoxy blend—Phase morphology and thermo-mechanical properties

An attempt was made to toughen diglycidyl ether of bisphenol A (DGEBA) type epoxy resin with liquid natural rubber possessing hydroxyl functionality (HTLNR). Epon 250 epoxy monomer is cured using nadic methyl anhydride as hardener in presence of N, N dimethyl benzyl amine as accelerator. HTLNR of different concentrations up to 20 wt % is used as modifier for epoxy resin. The addition HTLNR to an anhydride hardener/epoxy monomer mixture has given rise to the formation of phase-separated structure, consisting of small spherical liquid natural rubber particles bonded to the surrounding epoxy matrix. The particle size increased with increase in rubber content. The viscoelastic properties of the blends were analyzed using dynamic mechanical thermal analysis. The T_g corresponding to epoxy rich phase was evident from the dynamic mechanical spectrum, while the T_g of the rubber phase was overlapped by the β relaxation of epoxy phase. Glass transition of the epoxy phase decreased linearly as a function of the amount of rubber. The mechanical properties such as impact and fracture toughness were also carefully examined. The impact and fracture toughness increase with HTLNR content. A threefold increase in impact strength was observed with 15 wt % HTLNR/epoxy blend. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Effect of surface resistance on cyclohexane uptake curves in Silicalite-1 crystals

Adsorption kinetics of cyclohexane in a variety of Silicalite-1 samples were measured by gravimetric uptake experiments. The kinetic appears as dependent upon the history of the crystals. Samples stored for several months before calcination (with their micropores full of template) exhibit a kinetic drop by almost an order of magnitude. Surprisingly, physico-chemicals analysis do not show any differences between these samples (no modification of their crystallinity or morphology, and no residual carbon is detected in the pore network). The kinetic drop is therefore attributed to a modification of the crystals surface, induced by a long-time contact with the template or cyclohexane molecules.Aged and as-synthesized (non-calcined) samples were etched by an HF solution, so as to “purify” the surface of the crystals. After a few minutes of treatment, the aged samples recover their initial adsorption kinetic, confirming that the kinetic drop is induced by the partial blocking of the entrance of the pores. Moreover, some of the as-synthesized crystals also show a rise of their adsorption kinetic, showing that surface resistance can be present ab initio, depending on the synthesis conditions.In an attempt to produce an accelerated aging effect, hydrothermal treatments were performed on non-calcined crystals. However, the treatments conditions are too severe, and induce variations in the crystal structure.     

Structural evolution at short and medium range distances during crystallization of a P2O5-Li2O-Al2O3-SiO2 glass

Li₂O-Al₂O₃-SiO₂ (LAS) glass-ceramics have important industrial applications and bulk nucleation is usually achieved by using nucleating agents. In particular, P₂O₅ is an efficient agent in glasses containing a low level of Al₂O₃ but its role in the first stages of nucleation is not well established. In this study, we combine structural investigations from local to mesoscales to describe the structural evolution during crystallization of LAS glass-ceramics. Local environment is probed using ²⁹Si and ³¹P MAS-NMR, indicating organization of P in poorly crystallized Li₃PO₄ species prior to any crystallization. To better understand the detailed nanoscale changes of the glass structure, ³¹P-³¹P DQ-DRENAR homonuclear correlation experiments have been carried out, revealing the gradual segregation of P atoms associated with the formation of disordered Li₃PO₄. Small-angle neutron scattering data also show the apparition of nanoscale heterogeneities associated with Li₃PO₄ species upon heating treatments and allow the determination of their average sizes. These new structural information enhance our understanding of the role of P in nucleation mechanisms. Nucleation is initiated by gradual change in P environment implying P segregation upon heating treatments, forming disordered Li₃PO₄ heterogeneities. The segregation of P atoms enables the precipitation of meta- and disilicate phases.