Extrusion blown films of poly(lactic acid) chain‐extended with food grade multifunctional epoxies

The effectiveness and efficiency of two food grade multifunctional epoxies with low and high epoxy equivalent weights in chain extending/branching poly(lactic acid) (PLA) were studied in a torque rheometer. Processing PLA and chain extender (CE) at 200°C for 300 s not only chain‐extended PLA effectively as indicated by a significant increase in the mixing torque as well as PLA's melt viscosity and molecular weight, but also branched it leading to its reduced crystallinity. Chain extension occurred through the ring opening reaction of epoxy groups in the CE with PLA's hydroxyl and/or carboxyl groups. CE with lower epoxy equivalent weight was more efficient due to its higher reactivity. Secondly, the processabilities of PLA films chain‐extended and branched with various amounts of the most efficient CE were assessed. Like in torque rheometer, chain extension and branching also occurred during film production as indicated by PLA's increased molecular weight and decreased crystallinity when blended with CE. However, film manufacture was feasible only for blends with up to 0.5% CE, becoming unprocessable above this content due to chain entanglement leading to increased viscosity. Chain extension/branching of PLA was beneficial in overcoming film's brittleness since its impact strength increased almost linearly with the CE content. POLYM. ENG. SCI., 59:2211–2219, 2019. © 2019 Society of Plastics Engineers     

Surface texture and barrier performance of poly(lactic acid)–cellulose nanocrystal extruded-cast films

In this study, we assessed the influence of cellulose nanocrystal (CNC) addition level (0.5–2 wt %) on the surface texture, thickness, and barrier properties of poly(lactic acid) (PLA) extruded-cast films. Regardless of the CNC content, the addition of CNC increased the surface average roughness and maximum roughness of the PLA films in both the machine and cross-machine directions because of the presence of CNC agglomerates. The increased roughness resulted in films with uneven thicknesses; this affected their accurate measurements with a conventional micrometer. Rather, accurate thickness measurements were obtained through the density method, a more appropriate thickness measurement method for films with rough surfaces. The permeability values were negatively correlated with the increased crystallinity. Both the water vapor permeability and oxygen permeability (OP) values decreased significantly by approximately 26–45 and 25–50%, respectively, as the CNC content increased from 0.5 to 2 wt % because of the tortuosity effect. The OP values of the neat PLA and composite films remained insensitive to changes in the relative humidity (from 0 to 75%) when they were tested at 23 °C. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47594.     

高碳钢丝的拉拔条件

提出高碳钢丝拉拔时对水冷、表面处理、润滑剂及盘条要求。介绍了法国润滑剂特点及使用情况。     

Nido-Hydroborate-Based Electrolytes for All-Solid-State Lithium Batteries

Hydroborate-based solid electrolytes have recently been successfully employed in high voltage, room temperature all-solid-state sodium batteries. The transfer to analogous lithium systems has failed up to now due to the lower conductivity of the corresponding lithium compounds and their high cost. Here LiB₁₁H₁₄ nido-hydroborate as a cost-effective building block and its high-purity synthesis is introduced. The crystal structures of anhydrous LiB₁₁H₁₄ as well as of LiB₁₁H₁₄-based mixed-anion solid electrolytes are solved and high ionic conductivities of 1.1 × 10⁻⁴ S cm⁻¹ for Li₂(B₁₁H₁₄)(CB₁₁H₁₂) and 1.1 × 10⁻³ S cm⁻¹ for Li₃(B₁₁H₁₄)(CB₉H₁₀)₂ are obtained, respectively. LiB₁₁H₁₄ exhibits an oxidative stability limit of 2.6 V versus Li⁺/Li and the proposed decomposition products are discussed based on density functional theory calculations. Strategies are discussed to improve the stability of these compounds by modifying the chemical structure of the nido-hydroborate cage. Galvanostatic cycling in symmetric cells with two lithium metal electrodes shows a small overpotential increase from 22.5 to 30 mV after 620 h (up to 0.5 mAh cm⁻²), demonstrating that the electrolyte is compatible with metallic anodes. Finally, the Li₂(B₁₁H₁₄)(CB₁₁H₁₂)  electrolyte is employed in a proof-of-concept half cell with a TiS₂ cathode with a capacity retention of 82% after 150 cycles at C/5.     

On the existence and origin of sluggish diffusion in chemically disordered concentrated alloys

Concentrated single phase solid solutions, including medium- and high-entropy alloys, represent a new class of materials that have recently attracted significant interest due to exceptional functional and structural properties. Their fascinating properties are mainly attributed to the sluggish atomic-level diffusion and transport, but its controlling mechanisms are largely unknown and there is certain skepticism about its very existence. By using microsecond-scale molecular dynamics, on-the-fly and conventional kinetic Monte Carlo, we reveal the governing role of percolation effects and composition dependence of the vacancy migration energy in diffusion. Surprisingly, an increase of concentration of faster species (Fe) in face-centered cubic Ni-Fe alloy may decrease the overall atomic diffusion. Consequently, the composition dependence of tracer diffusion coefficient has a minimum near the site percolation threshold, ～20?at.%Fe. We argue that this coupled percolation and composition-dependent barriers for vacancy jumps within different subsystems in medium- and high-entropy alloys leads, indeed, to the sluggish diffusion. A fast method for preselecting materials with potentially desired properties is suggested.     

Modified Galacto- or Fuco-Clusters Exploiting the Siderophore Pathway to Inhibit the LecA- or LecB-Associated Virulence of Pseudomonas aeruginosa

Galacto- and fuco-clusters conjugated with one to three catechol or hydroxamate motifs were synthesised to target LecA and LecB lectins of Pseudomonas aeruginosa (PA) localised in the outer membrane and inside the bacterium. The resulting glycocluster–pseudosiderophore conjugates were evaluated as Trojan horses to cross the outer membrane of PA by iron transport. The data suggest that glycoclusters with catechol moieties are able to hijack the iron transport, whereas those with hydroxamates showed strong nonspecific interactions. Mono- and tricatechol galactoclusters ( G1C and G3C ) were evaluated as inhibitors of infection by PA in comparison with the free galactocluster ( G0 ). All of them exhibited an inhibitory effect between 46 to 75 % at 100 μM, with a higher potency than G0 . This result shows that LecA localised in the outer membrane of PA is involved in the infection mechanism.     

Robocast zirconia-toughened alumina scaffolds: Processing,structural characterisation and interaction with human primary osteoblasts

Zirconia-toughened alumina (ZTA) is the gold-standard ceramic in hip arthroplasty, but still lacks direct osseointegration and a metal shell, often coated with a bioactive layer, is currently required. The latter could potentially be replaced by a thinner, architectured ZTA layer, thereby allowing for larger acetabular components, with larger range of motion and lower dislocation risk. Robocasting may be an adequate technique to fabricate the architectured layer. Therefore, as a first step, this study aimed to produce ZTA scaffolds (3D-ZTA) by robocasting and assess their in vitro response. Shape retention was achieved by using a stable, well-dispersed, high solid loading ink injected in acid pH waterbath. 3D-ZTA exhibit regularly spaced microporous, rough struts and fully interconnected macroporosity. Human primary osteoblasts were homogenously distributed inside 3D-ZTA and showed increased osteogenic marker expression compared to 2D-ZTA control. Further work will focus on optimizing scaffold design to improve cell retention and extracellular matrix maturation.     

Electrodes based on nano-tree-like vanadium nitride and carbon nanotubes for micro-supercapacitors

Vanadium nitride(VN) was deposited by DC-sputtering on a vertically aligned carbon nanotube(CNTs)template for the purpose of nano-structuration. This led to the fabrication of hierarchically composite electrodes consisting of porous and nanostructured VN grown on vertically aligned CNTs in a nano-treelike configuration for micro-supercapacitor application. The electrodes show excellent performance with an areal capacitance as high as 37.5 m F cm~(-2) at a scan rate of 2 mV s~(-1) in a 0.5 MK_2SO_4 mild electrolyte solution. Furthermore, the capacitance decay was only 15% after 20,000 consecutive cycles. Moreover,the capacitance was found to increase with VN deposit thickness. The X-ray photoelectron spectroscopy analyses of the electrodes before and after cycling suggest that the oxide layers that form at the VN surface is the responsible for the redox energy storage in this material. Such electrodes can compete with other transition metal nitride based electrodes for micro-supercapacitors.