Crack healing in liquid-phase-pressureless-sintered silicon carbide–aluminum nitride composites

Crack healing in liquid-phase-pressureless-sintered SiC–AlN composites was investigated by introducing cracks into specimens and subsequently heat-treating the specimens. It was observed that cracks were healed and the strength was recovered. Cracks were filled with silica or mullite produced by the oxidation of the composites. It was shown that the healing temperature could be fixed in the range 1100–1300 °C and that large cracks up to about 300 μm could be healed completely. Our results imply that a simple oxidation heat-treatment can improve the reliability of silicon carbide–aluminum nitride components.     

The interrelation between mechanical properties, corrosion resistance and microstructure of Pb-Sn casting alloys for lead-acid battery components

It is well known that there is a strong influence of thermal processing variables on the solidification structure and as a direct consequence on the casting final properties. The morphological microstructural parameters such as grain size and cellular or dendritic spacings will depend on the heat transfer conditions imposed by the metal/mould system. There is a need to improve the understanding of the interrelation between the microstructure, mechanical properties and corrosion resistance of dilute Pb-Sn casting alloys which are widely used in the manufacture of battery components. The present study has established correlations between cellular microstructure, ultimate tensile strength and corrosion resistance of Pb-1 wt% Sn and Pb-2.5 wt% Sn alloys by providing a combined plot of these properties as a function of cell spacing. It was found that a compromise between good corrosion resistance and good mechanical properties can be attained by choosing an appropriate cell spacing range.     

Pd as a promoter to reduce Co cluster films at room temperature

The optical and resistivity properties of Pd/Co films are investigated and related to the interaction of palladium and the underlying cobalt (Co) clusters layer when exposed to hydrogen. Co is used because it is known to absorb hydrogen only on its surface. Co clusters with mean size of 1.8 nm in the gas phase were deposited on sapphire substrates at room temperature (RT), 300 °C, and 500 °C, respectively, and capped by a continuous Pd film. Light transmission and reflection in the visible range were measured during hydrogen exposure at different pressures in consecutive cycles. An unusual change in the transmittance and the resistance during the first hydrogenation cycle of a sample suggests that a reduction of the surface oxide on the Co clusters layer occurs at room temperature. The reduction of the native oxide on Co thin films or bulk does not happen without the Pd capping when exposed to hydrogen under similar conditions.     

A knapsack problem as a tool to solve the production planning problem in small foundries

According to recent research carried out in the foundry sector, one of the most important concerns of the industries is to improve their production planning. A foundry production plan involves two dependent stages: (1) determining the alloys to be merged and (2) determining the lots that will be produced. The purpose of this study is to draw up plans of minimum production cost for the lot-sizing problem for small foundries. As suggested in the literature, the proposed heuristic addresses the problem stages in a hierarchical way. Firstly, the alloys are determined and, subsequently, the items that are produced from them. In this study, a knapsack problem as a tool to determine the items to be produced from furnace loading was proposed. Moreover, we proposed a genetic algorithm to explore some possible sets of alloys and to determine the production planning for a small foundry. Our method attempts to overcome the difficulties in finding good production planning presented by the method proposed in the literature. The computational experiments show that the proposed methods presented better results than the literature. Furthermore, the proposed methods do not need commercial software, which is favorable for small foundries.     

Enzymatic and non‐enzymatic antioxidant systems of minimally processed cactus stems (Opuntia ficus‐indica Mill.) packaged under modified atmospheres

The aim of this work was to determine the enzymatic activities of catalase (CAT), superoxide dismutase (SOD) and ascorbate peroxidase (APX) together with the total phenolic and carotenoid contents and antioxidant capacity of two cultivars of cactus stems under modified atmosphere packaging containing a passive atmosphere, an active (with N₂) atmosphere and control (unsealed polyurethane trays) all stored at 4 ± 1 °C. Results indicated that Atlixco cultivar cactus stems had a shelf life that was twice as long (20 days) than that of Milpa Alta cultivar under N₂ MAP. The total enzyme activities of SOD, APX and CAT as well as the carotenoid content were higher in Atlixco than in Milpa Alta. The antioxidant enzymatic and non‐enzymatic systems as well as the antioxidant capacity and the phenolic content retention determined in Atlixco cactus stems under N₂ MAP appear to explain the longer postharvest life of this cultivar.     

The sanitizing action of essential oil-based solutions against Salmonella enterica serotype Enteritidis S64 biofilm formation on AISI 304 stainless steel

Bacterial adhesion and biofilm formation by Salmonella enterica serovar Enteritidis is a serious concern in the food processing industry; organism persistence in biofilms represents a continual source of contamination. Due to unsuccessful disinfection processes and emerging resistance, conventional control methods are rapidly becoming ineffective, necessitating the development of new control strategies. The following study evaluated the anti-biofilm effect of disinfectant solutions formulated with essential oils (EOs) of peppermint (Mentha piperita) and lemongrass (Cymbopogon citratus) against biofilm formation by S. enterica serotype Enteritidis S64 on stainless steel surface AISI 304 (#4) after 10, 20 and 40 min of contact. A minimum inhibitory concentration (MIC) of 7.8 μL/mL was found for both EOs and disinfectant solutions were formulated based on these MIC values. Ten minutes of sanitizing solution contact significantly reduced (p ≤ 0.05) adhered bacterial populations for both EOs tested. After 20 and 40 min of treatment, cell counts were not detected. Thus, M. piperita and C. citratus EOs can be considered convenient, quality alternatives to the application of conventional sanitizing agents in the food industry; further, use of these EOs addresses the increasing consumer demand for natural products.     

Experimental Characterization of Space Charge in IZIP Detectors

Interleaved ionization electrode geometries offer the possibility of efficient rejection of near-surface events. The CDMS collaboration has implemented this interleaved approach for the charge and phonon readout for our germanium detectors. During a recent engineering run with negligible ambient radiation, the detectors were found to lose ionization stability more quickly than expected. This paper summarizes studies done in order to determine the underlying cause of the instability, as well as possible running modes that maintain stability without unacceptable loss of livetime. Additionally, first results are shown for the new version IZIP mask which attempts to improve the overall stability of the detectors.     

Performance analysis of a mono-cylinder diesel engine using soy straight vegetable oil as fuel with varying temperature and injection angle

Experimental results are presented for a compression ignition engine with one cylinder refrigerated by air, fueled with soy straight vegetable oil (SVO), filtered at 500 nm and blended with diesel at volume percentages of 10, 30, 50, 70 and 100%. Performance tests varying the injection angle and the fuel temperature were conducted. The results show an increase in torque and power compared to pure diesel, especially with the SVO50 and SVO70 mixtures. However, there was an increase in the specific consumption, although engine efficiency was only slightly lower due to the lower heating value of oil. The use of SVO as fuel is feasible, but durability tests must be performed, mainly to discover potential maintenance problems.