Diameter of Single-Walled Carbon Nanotubes (SWCNTs) as an Effective Factor in the Detection and Degradation of PCBs

Polychlorinated biphenyls (PCBs) are chlorinated organic compounds and well known carcinogenic and toxic pollutants. Currently, their detection and degradation to products with less risk are among environmental and health priorities. Passing 2,2′,4,4′,5,5′-Hexachlorobiphenyl (PCB-153) through the armchair single-walled carbon nanotubes (SWCNTs) (8, 8) and (10, 10) was investigated by Modified Neglect of Diatomic Overlap in the semi-empirical method. The analysis of results suggests that there are meaningful changes in the middle of the tubes. Based on the obtained evidence, the nanotubes have substantial potential to interact with the PCB-153 molecule effectively. The results show that the increased diameter in the armchair SWCNTs improves the detection and degradation potential of the tube to PCBs. According to the calculated thermodynamic parameters, the diameter of nano-structures is an effective factor in PCBs removal efficiency, as it could be helpful to make a more sensitive PCB nano-sensor.     

Langmuir technique and Brewster angle microscope studies of the interfacial behavior of bitumen, asphaltenes and maltenes at the air-water interface. I. Effect of different spreading solution volumes

It is believed that surface active materials in bitumen (asphaltenes and maltenes) are responsible for the stabilization of undesirable water-in-bitumen emulsions in several processes in the petrochemical and oil sands industries. In order to find an efficient technique to break these emulsions, complete knowledge of the interfacial properties of bitumen, maltenes and asphaltenes is required. In this work, the capability of these three fractions to form monolayers at the air-water interface and the structural conformations formed under different compression stages and different added volumes, taken from constant concentration spreading solutions, are analyzed using a Langmuir trough and Brewster angle microscopy. According to the results presented here, the three fractions form true monolayers at the air-water interface with bitumen displaying a “sponge-like” structure, asphaltenes arranging in dense islands and maltenes forming very thin flexible layers. Bitumen, asphaltenes and maltenes organize in association structures of added volume depending sizes: increasing volumes lead to increasing sizes. Compression of the monolayers also favors the formation of larger structures that, upon expansion, do not relax to their original state. This fact is responsible for the hysteresis displayed by the three fractions, being asphaltenes the fraction showing the greatest rigidity, maltenes the greatest flexibility and bitumen an intermediate behavior. Out-of-plane regions were only detected for asphaltenes, which at high surface pressures, fold and bulge up, resulting in a loss of surface active material at the air-water interface. These three-dimensional structures persist upon expansion of the film.     

Effect of dispersion states (electrostatic/electrosteric stabilization) on particles arrangement in the yttria-stabilized zirconia sediments

In the present work, particle arrangement and their packing in the sediment layer of zirconia suspension were studied. To evaluate the particle settling, aqueous suspensions of zirconia nanoparticles were prepared in different dispersion states. In one state, Dolapix CE64 was used as a dispersant to provide electrosteric mechanism. In another state, pH of the suspension was adjusted at 4 to provide electrostatic mechanism. The other state was the combination of dispersant and pH adjustment which resulted in the most stable suspension. First of all, the stability of all dispersion states was evaluated by zeta potential, sediment volume (SV) and height, viscosity, and packing density (PD). Then, the sediment layers of all suspensions were characterized. Incorporation of electrostatic mechanism was resulted in a main decrease in viscosity with high surface charges, while electrosteric mechanism caused lower sedimentation of particles. Fall velocities of particles/agglomerates were estimated, and the influences of dispersion states on the particles fall velocities were characterized. The microstructural observation revealed homogeneous packing of particles in the sediment layer of the stable suspension demonstrating the proper dispersion of particles. Dolapix CE64 and pH adjustment resulted in a uniform arrangement of particles without agglomeration and spherical and regular granules with a uniform shape.     

Endothelial Colony-Forming Cells Dysfunctions Are Associated with Arterial Hypertension in a Rat Model of Intrauterine Growth Restriction

Infants born after intrauterine growth restriction (IUGR) are at risk of developing arterial hypertension at adulthood. The endothelium plays a major role in the pathogenesis of hypertension. Endothelial colony-forming cells (ECFCs), critical circulating components of the endothelium, are involved in vasculo-and angiogenesis and in endothelium repair. We previously described impaired functionality of ECFCs in cord blood of low-birth-weight newborns. However, whether early ECFC alterations persist thereafter and could be associated with hypertension in individuals born after IUGR remains unknown. A rat model of IUGR was induced by a maternal low-protein diet during gestation versus a control (CTRL) diet. In six-month-old offspring, only IUGR males have increased systolic blood pressure (tail-cuff plethysmography) and microvascular rarefaction (immunofluorescence). ECFCs isolated from bone marrow of IUGR versus CTRL males displayed a decreased proportion of CD31+ versus CD146+ staining on CD45− cells, CD34 expression (flow cytometry, immunofluorescence), reduced proliferation (BrdU incorporation), and an impaired capacity to form capillary-like structures (Matrigel test), associated with an impaired angiogenic profile (immunofluorescence). These dysfunctions were associated with oxidative stress (increased superoxide anion levels (fluorescent dye), decreased superoxide dismutase protein expression, increased DNA damage (immunofluorescence), and stress-induced premature senescence (SIPS; increased beta-galactosidase activity, increased p16^INK4a, and decreased sirtuin-1 protein expression). This study demonstrated an impaired functionality of ECFCs at adulthood associated with arterial hypertension in individuals born after IUGR.     

Effect of Co addition on microstructural and mechanical properties of WC–B4C–SiC composites

In this study, the effect of Co addition on microstructural and mechanical properties of WC-B₄C–SiC composites sintered by spark plasma sintering (SPS) method was investigated. For this purpose, three batches of WC-B₄C–SiC with different contents of Co (10 vol%, 15 vol%, and 20 Vol %) were sintered at 1400 °C. The results of X-ray diffraction (XRD) analysis of the samples indicated the formation of W₂B₅, W₃CoB₃ as well as the remained C phases and unreacted SiC phase. It was observed that by increasing the Co content, the amount of W₂B₅ phase reduces and W₃CoB₃ and C contents increase. Therefore, W₂B₅ peaks were not detected in the sample containing 20vol% Co. Relative density values above 97% were obtained for all the composites. However, a decrease was observed in relative density by increasing the Co content in the composites. The highest flexural strength (510 ± 42 MPa), fracture toughness (10.34 ± 0.82 MPa m^1/2), and hardness (20.63 ± 0.75 GPa) were also obtained for the sample containing 10vol% Co compared to the other samples. In addition, Transgranular fracture of SiC as well as pulling out of W₃CoB₃ and W₂B₅ particles were observed in the fracture surface micrographs of the samples. The presence of micro-cracks in the SiC grains, fracture of W₃CoB₃ grains, and crack deflection was reported as dominant toughening mechanisms.     

Ante- and perinatal factors and child characteristics predicting parenting experience among formerly infertile couples during the child's first year: A controlled study.

In this prospective controlled study, the authors examined (a) parenting experiences among couples with successful assisted reproduction treatment (ART; n = 367) and fertile spontaneously conceiving controls (n = 371) and (b) the impact of ante- and perinatal factors and child characteristics on parenting experiences. The results show that positive mothering experiences increased more during the 1st year of parenting and were generally higher among ART mothers than control mothers. No differences were found between ART fathers and controls in their fathering experience. Unpleasant birth experiences, low birth weight, and difficulty soothing the child were associated with high levels of parental stress in the control group, but this was not so among the ART parents. Psychosocial interventions in maternal care should take into account the various meanings that couples give to the history of infertility and conception and ante- and perinatal experiences. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Verifying Object-based Graph Grammars

The development of concurrent and reactive systems is gaining importance since they are well-suited to modern computing platforms, such as the Internet. However, the development of correct concurrent and reactive systems is a non-trivial task. Object-based graph grammar (OBGG) is a visual formal language suitable for the specification of this class of systems. In previous work, a translation from OBGG to PROMELA (the input language of the SPIN model checker) was defined, enabling the verification of OBGG models using SPIN. In this paper we extend this approach in two different ways: (1) the approach for property specification is improved, enabling to prove properties not only about possible OBGG derivations, but also about the internal state of involved objects; (2) an approach is defined to interpret PROMELA races as OBGG derivations, generating graphical counter-examples for properties that are not true for a given OBGG model. Another contribution of this paper is (3) the definition of a method for model checking partial systems (isolated objects or a set of objects) using an assume-guarantee approach. A gas station system modeled with OBGGs is used to illustrate the contributions.This work is partially sponsored by projects IQ-MObile (CNPq-Brazil/CNR-Italy) and PLATUS (CNPq).Osmar Marchi dos Santos is partially sponsored by CAPES-Brazil.     

Selective refinement queries for volume visualization of unstructured tetrahedral meshes

We address the problem of the efficient visualization of large irregular volume data sets by exploiting a multiresolution model based on tetrahedral meshes. Multiresolution models, also called Level-Of-Detail (LOD) models, allow encoding the whole data set at a virtually continuous range of different resolutions. We have identified a set of queries for extracting meshes at variable resolution from a multiresolution model, based on field values, domain location, or opacity of the transfer function. Such queries allow trading off between resolution and speed in visualization. We define a new compact data structure for encoding a multiresolution tetrahedral mesh built through edge collapses to support selective refinement efficiently and show that such a structure has a storage cost from 3 to 5.5 times lower than standard data structures used for tetrahedral meshes. The data structures and variable resolution queries have been implemented together with state-of-the art visualization techniques in a system for the interactive visualization of three-dimensional scalar fields defined on tetrahedral meshes. Experimental results show that selective refinement queries can support interactive visualization of large data sets.