A First Report of Photoemission in Experiments Related to Flash Sintering

A highly nonlinear increase in electrical conductivity and concomitant photoemission occurs not only during “flash sintering” but also in presintered, dense specimens. We report results from experiments with dense specimens that show a strong correspondence between the intensity of photoemission and electrical conductivity of specimens under a variety of conditions of the electrical parameters. It is proposed that both properties are related to the concentration of electron–hole pairs generated in such experiments.     

Reactive flash sintering of powders of four constituents into a single phase of a complex oxide in a few seconds below 700°C

Recent work on reactive flash sintering of powders of two oxides, bismuth and of iron oxide, into pure single phase bismuth ferrite, which was accomplished in a few seconds at low furnace temperatures, is expanded to four constituents, alumina, lithia, zirconia, and lanthana, to produce reasonably dense polycrystals of a predominantly single phase, cubic LLZO(Al). Transformation and sintering occur concurrently at a furnace temperature near 700°C, in ambient atmosphere, in just a few seconds. The process may simplify the preparation of complex ceramics with new chemistries and dopants, which are predicted from ab intio calculations to have special attributes, not only because the powders sinter quickly at low temperatures, but also because the need for stoichiometric powders as starting materials is obviated.     

Predictive Thermal Inactivation Model for Effects and Interactions of Temperature, NaCl, Sodium Pyrophosphate, and Sodium Lactate on Listeria monocytogenes in Ground Beef

The effects and interactions of heating temperature (60 °C to 73.9 °C), salt (0.0 % to 4.5 %?w/v), sodium pyrophosphate (0.0 % to 0.5 %?w/v), and sodium lactate (0.0 % to 4.5 %?w/v) on the heat resistance of a five-strain mixture of Listeria monocytogenes in 75 % lean ground beef were examined. Meat samples in sterile filtered stomacher bags were heated in a temperature controlled waterbath to determine thermal death times. The recovery medium was tryptic soy agar supplemented with 0.6 % yeast extract and 1 % sodium pyruvate. Weibull survival functions were employed to model the primary survival curves. Then, survival curve-specific estimated parameter values obtained from the Weibull model were used for determining a secondary model. The results indicate that temperature and salt have a large impact on the inactivation kinetics of L. monocytogenes, while sodium lactate (NaL) has an impact in the presence of salt. The model presented in this paper for predicting inactivation of L. monocytogenes can be used as an aid in designing lethality treatments meant to control the presence of this pathogen in ready-to-eat products.     

Mesoporous Pt–Ni catalyst and their electro catalytic activity towards methanol oxidation

Mesoporous Pt/Ni architecture has been prepared by template assisted electrochemical deposition of Pt–Ni over anodized aluminum oxide template followed by controlled de-alloying with nitric acid. Surface characteristics of the ordered bimetallic mesoporous Pt/Ni structure were systematically characterized through XRD, SEM, AFM and XPS analyses. It is designated by XPS analysis that presence of Ni significantly modifies surface characteristics and electronic states of Pt accompanied with a downshift in the d-band character of Pt. Mesoporous morphology is highly beneficial to offer readily accessible Pt catalytic sites for methanol oxidation reaction. The prepared bimetallic Pt/Ni was used as electro catalyst for DMFC. Comparison of electrocatalytic activity of bimetallic mesoporous Pt/Ni with bimetallic smooth Pt/Ni was interrogated using cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy analyses. Distinctly enhanced electrocatalytic activity with improved CO tolerance associated with bimetallic mesoporous Pt/Ni electrode towards methanol oxidation stems from a synergy existing between mesoporous structure with bi-metallic composition.     

Strategic Shuffling of Clay Layers to Imbue Them with Responsiveness

Layers of naturally occurring clay minerals are rearranged to prepare highly sensitive multiresponsive clay–clay bilayer membrane (CCBM). The CCBM introduced here responds to the minuscule changes in the surrounding environments including temperature, humidity, and presence of solvent vapors by morphing in specific manners. Strips cut from CCBM exhibit up to 588 N kg^?1 force output when exposed to temperature fluctuations. Inheriting the natural stability of clay minerals, CCBM demonstrates extreme robustness, heating up to 500 °C, cooling with liquid N₂ and exposure to corrosive chemical vapors did not deteriorate its bending performance. Mechanistic studies suggest that shape transformations of CCBM are driven by the unequal response of its components to external stimuli.     

Efficient Jarratt-like methods for solving systems of nonlinear equations

We present the iterative methods of fourth and sixth order convergence for solving systems of nonlinear equations. Fourth order method is composed of two Jarratt-like steps and requires the evaluations of one function, two first derivatives and one matrix inversion in each iteration. Sixth order method is the composition of three Jarratt-like steps of which the first two steps are that of the proposed fourth order scheme and requires one extra function evaluation in addition to the evaluations of fourth order method. Computational efficiency in its general form is discussed. A comparison between the efficiencies of proposed techniques with existing methods of similar nature is made. The performance is tested through numerical examples. Moreover, theoretical results concerning order of convergence and computational efficiency are confirmed in the examples. It is shown that the present methods are more efficient than their existing counterparts, particularly when applied to the large systems of equations.     

Reactive flash sintering: MgO and α-Al2O3 transform and sinter into single-phase polycrystals of MgAl2O4

We show that flash experiments with three phase mixed-powders of yttria-stabilized zirconia (8YSZ), MgO, and α-Al₂O₃ not only produce polycrystals of high density, but also the transformation of magnesia and alumina into single-phase spinel. The presence of zirconia facilitates the onset of the flash. The sintering experiments in the laboratory were extended to live experiments at the National Synchrotron Light Source II at Brookhaven National Laboratory in order to measure the time-dependent evolution of single-phase spinel. The phase transformation occurred in <3 seconds during Stage II. Later, during Stage III the cubic zirconia transformed partly into the monoclinic phase, which reverted back to the cubic phase when the flash was extinguished by turning off the current to the specimen. The results underpin a recent report on the synthesis of single-phase bismuth ferrite from constituent oxides in reactive flash experiments, raising the specter of flash as a method for synthesis as well as sintering of complex oxide ceramics. The role of zirconia in catalyzing the flash in the present study is discussed.     

Studies on the effect of temperature and time on the SS 304 surface for the properties degradation of the solar collector

The properties of emissivity (?) and absorptivity (α) of the surface of the material is an essential output for the solar collector. This paper highlights the work based on the RSM design expert, to study the effect of parameters’ temperature and time when the surface is exposed to sunlight and absorbing the properties of emissivity and absorptivity of the material SS 304. The temperature range of the SS 304 varied from 20°C to 356°C for various time intervals from 90 to 1100?h. From this experimental work, it is clearly seen that the emissivity rate increased when the surface is focused onto sunlight beyond the saturated level. The absorptivity of the surface of SS 304 increases till the optimum level and reaches the saturated level. As a result, after the optimum level, emissivity rate of the surface increases, and absorptivity of the surface decreases when it is focused onto sunlight.