Facile synthesis of rice shaped CuO nanostructures for battery application

The oxides of transition metals are an important class of semiconductors, which have applications in electronics, magnetic storage media, solar applications and catalysis. Among them, CuO has attracted much attention due to its widespread applications. In this paper, a facile synthesis of rice shaped CuO nanostructures have been prepared by reflux method for battery application using Copper nitrate and ammonia as precursors. Samples were prepared at three different reaction timings namely 6, 12 and 24 h. The as-prepared samples were calcinated at 400 °C to ensure the formation of copper oxide. The final products were subjected to X-ray diffraction, scanning electron microscopy, FT-IR and UV–Vis spectroscopy in order to study the effect of reaction time on the properties of the prepared copper oxide nanostructures. It is found that at controlled reaction time rice shaped CuO nanostructures are obtained. Cyclic voltammogram was recorded to understand the electrocatalytic behaviors of the rice shaped CuO sample prepared under optimized condition.     

Phenomena of reverse momentum pulse and fluid leak after poison injection in the shut down system of PHWR

The primary function of the shut down system in a nuclear reactor is to terminate any reactivity transient occurring in the core during its entire design life. Normally there is more than one system, which are independent and diverse in its mode of operation. They consist of quick acting mechanisms like dropping of safety rods by gravity, poison injection, etc. Typically in liquid poison injection system wherein high flow velocities are involved, there is significant fluid structure interaction associated with cyclic shock transients in the system. One such phenomenon has been captured and analyzed to understand the dynamics involved in the loop. The trends of loop pressure and vibration indicated presence of more than two pressure transients after complete injection of poison. The first transient arrived after 1.44 s and the second after 0.75 s. The reverse pressure pulses that manifested in the loop as a result of fast injection of fluid has been mathematically characterized by solving basic fluid balance equations. Possibility of ball lifting due to momentum pulse is also discussed.     

Caulerpa lentillifera inhibits protein-tyrosine phosphatase 1B and protects pancreatic beta cell via its insulin mimetic effect

Food Science and Biotechnology - The aim of this study was to determine whether Caulerpa lentillifea extract (CLE) can protect pancreatic beta cells and enhance insulin signaling in adipocytes. We...     

Sizing Cracks in Power Plant Components Using Array Based Ultrasonic Techniques

New techniques developed using the array transducer, to image and size the bottom-surface and near-through-wall crack-like defects in thick carbon steel components are discussed. Three studies are reported here including (a) Optimal beam steering angle for focused and unfocused inspection using phased array method for bottom-surface crack sizing. (b) A front wall correction algorithm for sizing of near-through-wall crack-like defects. (c) A small aperture technique for sizing of near-through-wall crack-like defects. A Finite Difference Time Domain (FDTD) based simulation was used to study and verify the experimental observations. The application of time domain scheme relative arrival time technique (RATT), to measure the size of the near-through wall crack-like defects for the leak before break (LBB) criterion, was also investigated and found to be insufficient. A conventional SAFT algorithm was used for improving the sizing using the small aperture technique.     

Use of cellular confinement for improved railway performance on soft subgrades

Due to extensive right-of-way, railroads are inevitably subject to poor subgrade conditions and interrupted service for significant maintenance due to excessive deformations and loss of track geometry. Geocell confinement presents itself as a possible solution for improving performance of ballasted railroad embankments over weak subgrade. To investigate the efficacy of geocell confinement on ballasted railway embankments, a set of well-instrumented, large-scale cyclic plate loading tests and numerical simulations were performed on geocell-confined ballast overlaying a weak subgrade material. The agreement of results from tests and simulations served as a basis for simulating practical track geometry and performance for various geocell configurations and subgrades using three-dimensional (3D) finite element (FE) analyses. The study showed that geocell reinforcement significantly decreased track settlement, decreased subgrade deformations with lower and uniform distribution of vertical stresses on subgrade and inhibited lateral deformation and serviceability under cyclic loading. These results demonstrate that geocell confinement can be an effective alternative to subsurface improvement or shorter maintenance cycles, particularly on weak subgrades.     

Convective heat transfer enhancement techniques of heat exchanger tubes: a review

Heat exchangers are widely used in almost all industrial activities. Turbulent promoters used in heat exchanger tubes are an effective way of enhancing the performance. This paper summarises various investigations using twisted tapes, wire coil ribs, baffles, and swirl flow generators. The main objective of this paper is to review various studies, in which different obstacle roughness elements are used to enhance the rate of heat transfer in the heat exchanger tubes. It has been found that a lot of experimental and analytical studies reported in the literature. On the basis of correlations developed by various investigators an attempt has been made to compare the thermal hydraulic performance of obstacles in heat exchanger tubes. In this work, a comparative study is also carried out to select the best obstacle roughness shapes for higher heat transfer rate and low pressure drop losses.     

A Novel In Situ Method for Producing a Dispersion of a Ceramic Phase into Copper That Remains Stable at 0.9T M

We apply an in situ approach, whereby a polymer is incorporated into copper and evolves within the metal into the ceramic phase, to create a dispersion of hard particles in a metal. All constituents for the ceramic phase are contained within the organic polymer. The temperature for this polymer to ceramic conversion lies in the 1073 K to 1273 K (800 °C to 1000 °C) range. The process produces a nanoscale dispersion of the ceramic, which leads to high microhardness that remains unaltered at temperatures up to 1223 K (950 °C) (0.9T _M). Apparently, the introduction of the ceramic phase leads to the retention of copper crystallite size of a few hundred nm, despite exposure to heat treatments at these very high temperatures. We call these materials polymer-derived metal-matrix composites.     

Effect of Microstructural Parameters on the Relative Densities of Metal Foams

A detailed quantitative microstructural analyses of primarily open cell FeCrAlY and 314 stainless steel metal foams with different relative densities and pores per inch (p.p.i.) were undertaken in the present investigation to determine the effect of microstructural parameters on the relative densities of metal foams. Several elements of the microstructure, such as major and minor cell sizes, cell areas and perimeters, ligament dimensions, cell shapes, and area fractions of closed and open cells, were measured. The cross-sections of the foam ligaments showed numerous pores, and their circularity factors and average sizes were determined. The area fractions of the open cells and ligaments decreased, whereas that of the closed cells increased linearly with increasing relative density. The relative densities and p.p.i. were not significantly dependent on cell size, cell perimeter, and ligament dimensions within the limits of experimental scatter. A phenomenological model is proposed to rationalize the present microstructural observations.     

Characterisation of solution annealed VT-14 titanium alloy using eddy current based electrical resistivity measurements

This paper discusses characterisation of microstructures in Ti-4.5Al-3Mo-1V (VT-14) alloy specimens solutionized in the temperature range of 923K–1373K, using room temperature electrical resistivity measurements. Using phase angle of impedance change in eddy current coil as a parameter, calibration curve between resistivity and phase angle has been established using three reference specimens of known resistivity. The changes in the electrical resistivity of the specimens have been correlated with optical microscopy investigations. The electrical resistivity of unstable β phase has been compared with α and α′ phases and possible reasons for higher resistivity of β phase and lower resistivity of α′ have been given based on the rule of mixtures and scattering and mobility of electrons. The electrical resistivity of α′ martensite phase of the chosen VT-14 alloy has been determined as 1.04 αΩ-m. The studies reveal that it may be possible to identify the β transus temperature of α+β titanium alloys from the electrical resistivity data.