Polymer films releasing nisin and/or natamycin from polyvinyldichloride lacquer coating: Nisin and natamycin migration,efficiency in cheese packaging

Polyethylene films coated by commercially available polyvinyldichloride (PVdC) as well as nitrocellulose (NC) lacquer with addition of natamycin preparation Delvocid® (16.7% w/w of natamycin in lacquer) were studied at 6 and 23 °C to determine the preservative migration into distilled water. The films released natamycin at maximal level 2.34 ± 0.32 mg/dm². The diffusion coefficient of 0.79 × 10⁻¹⁰ ± 0.29 × 10⁻¹⁰ cm²/s and 1.03 × 10⁻¹⁰ ± 0.17 × 10⁻¹⁰ cm²/s was determined for natamycin transport in PVdC lacquer layer at 6 and 23 °C, respectively. For nitrocellulose lacquer the diffusion coefficient of 0.89 × 10⁻¹⁰ ± 0.16 × 10⁻¹⁰ cm²/s was found at 23 °C. The coextruded polyamide/polyethylene film coated with the PVdC lacquer containing both nisin (16.7% w/w of preparation Nisaplin®) and natamycin (see above) provided inhibitory effect against selected indicator microorganisms (Penicillium expansum, Fusarium culmorum, Lactobacillus helveticus, Listeria ivanovií). This film was unsuitable for the packaging of the surface ripened cheese Olomoucké tvar??ky. On the other hand, it was able to prevent the growth of spoilage microorganisms on the surface of the packaged soft cheese Bla?ácké zlato.     

Thermal stability of the optical properties of plasma deposited diamond-like carbon thin films

In present paper we studied the optical constants of the diamond-like carbon (DLC) films and their changes with annealing. The multisample modification of combined variable angle spectroscopic ellipsometry and near normal spectroscopic reflectometry was used. The optical constants of the DLC films were simulated by our recently published six-parameter dispersion model employing a parameterization of the density of electronic states (DOS). Based on the dispersion model parameters the density of π and σ electrons were evaluated. We showed that from our model and the independently determined hydrogen atomic fraction of the films before and after annealing the ratio between momentum matrix elements of π → π* and σ → σ* transitions and the correct sp³-to-sp² carbon bonding configuration ratio can be calculated. It is worth to notice that the first quantity is usually assumed to be equal to unity but we showed that this assumption may cause a significant error in the determination of the sp³-to-sp² ratio. Therefore, our suggested method represents a novelty in this field.     

Numerical simulation of interaction between turbulent flow and a vibrating airfoil

The subject of this paper is the numerical simulation of the interaction of two-dimensional incompressible viscous flow and a vibrating airfoil. A solid elastically supported airfoil with two degrees of freedom, which can rotate around the elastic axis and oscillate in the vertical direction, is considered. The numerical simulation consists of the stabilized finite element treatment of the Reynolds averaged Navier–Stokes (RANS) approach, the use of turbulence models and the solution of the system of ordinary differential equations describing the airfoil motion. The time dependent computational domain and a moving grid are taken into account with the aid of the Arbitrary Lagrangian–Eulerian (ALE) formulation of the Navier–Stokes equations. High Reynolds numbers up to 10⁶ require to use a suitable stabilization of the finite element discretization and the application of a turbulence model. We apply the algebraic turbulence model, which was designed by Baldwin and Lomax and modified by Rostand. The developed technique was tested by the simulation of flow past a flat rigid plate and the computation of pressure distribution around a rotating airfoil with prescribed motion. Finally, the method was applied to the simulation of flow induced airfoil vibrations. This research was supported under the Grant No. IAA200760613 of the Grant Agency of Academy of Sciences of the Czech Republic. The research of M. Feistauer was partly supported by the research project MSM 0021620839 financed by the Ministry of Education of the Czech Republic and the research of L. Dubcová was partly supported by the grant No. 48607 of the Grant Agency of the Charles University. The authors acknowledge the support of these institutions.     

Fracture behaviour of alumina and zirconia thin layered laminate

Laminates with strong bonds between thin layers were examined in this work to explore the influence of developed internal stresses on the fracture behaviour. A set of laminates having different level of internal stresses were prepared. Alumina and zirconia were the model materials for evenly alternating layers. The electrophoretic deposition technique was used for manufacturing of the laminates. The basic mechanical properties as elastic modulus and flexural strength were determined for all prepared materials. The crack propagation changes due to effect of internal stresses, elastic mismatch and surface effects were investigated using modified single edge notched beam technique. An extensive fractographical analysis of fracture surfaces was undertaken using laser confocal microscopy. The changes of the crack direction when crack propagates through alternating layers under different angels were described. Further, the effect of the internal stresses level within individual layers was reported.     

Biomass ash-based mineral admixture prepared from municipal sewage sludge and its application in cement composites

Biomass as the biodegradable fraction of both agricultural products and industrial and municipal waste is currently a versatile energy resource. It can be stored and converted in practically any form of energy carrier and also into biochemicals and biomaterials from which, once they have been used, the energy content can be recovered to generate electricity, heat, or transport fuels. Moreover, the residues of its incineration can often be reused as pozzolanic additions to cement which can be considered as an environmentally friendly way of their disposal. In this paper, municipal sewage sludge with the organic carbon content of 27% was used for the preparation of biomass ash that should potentially find use as environmentally friendly mineral admixture to construction binders. Based on physical and chemical characterization of the raw material that showed a suitable chemical and phase composition, organic matter in a significant amount, and no thermal decomposition processes above 700 °C, biomass ash was produced. The biomass ash was obtained by incineration of sewage sludge at 700 °C, and mechanical activation contained 52% of amorphous phase which correlates with its good pozzolanic activity. The concentration of heavy metals, soluble chlorides, nitrates, and sulfates in biomass ash is found well below the standard permissible values. The composites prepared with a biomass ash dosage of 10, 20, and 30 wt% of Portland cement exhibited good functional properties. The increase in porosity up to 6% and decrease in compressive strength up to 3% were satisfactory. The results of leaching tests showed that composites with biomass ash contain only trace amounts of chlorides, nitrates, and sulfates. Apparently, the chlorides contained in biomass ash (0.7 mg/g) were immobilized in the cement matrix because the amounts of leached chlorides (0.04 wt%) were the same for all composites and well below the permissible limit for concrete. As revealed by the X-ray diffraction and thermogravimetric analyses, a significant decrease in portlandite content with increasing biomass ash content confirmed the pozzolanic reaction in biomass ash containing composite mixes. The environmental assessment showed a significant decrease in both carbon dioxide production and energy consumption with the increasing biomass ash content. For the composite with 30% biomass ash dosage, it was 21% of CO₂ and 11% of energy, as compared with the reference mix. The combination of good functional and environmental parameters of the analyzed composites makes good prerequisites for their application in construction industry. Taylor-made mineral admixture on biomass ash basis can find a broad use as eco-efficient admixture to cement- and lime-based binders.     

DYRK1A Negatively Regulates CDK5-SOX2 Pathway and Self-Renewal of Glioblastoma Stem Cells

Glioblastoma display vast cellular heterogeneity, with glioblastoma stem cells (GSCs) at the apex. The critical role of GSCs in tumour growth and resistance to therapy highlights the need to delineate mechanisms that control stemness and differentiation potential of GSC. Dual-specificity tyrosine phosphorylation-regulated kinase 1A (DYRK1A) regulates neural progenitor cell differentiation, but its role in cancer stem cell differentiation is largely unknown. Herein, we demonstrate that DYRK1A kinase is crucial for the differentiation commitment of glioblastoma stem cells. DYRK1A inhibition insulates the self-renewing population of GSCs from potent differentiation-inducing signals. Mechanistically, we show that DYRK1A promotes differentiation and limits stemness acquisition via deactivation of CDK5, an unconventional kinase recently described as an oncogene. DYRK1A-dependent inactivation of CDK5 results in decreased expression of the stemness gene SOX2 and promotes the commitment of GSC to differentiate. Our investigations of the novel DYRK1A-CDK5-SOX2 pathway provide further insights into the mechanisms underlying glioblastoma stem cell maintenance.     

Inactivation of microorganisms in a flow‐through photoreactor with an immobilized TiO2 layer

A laboratory flow‐through photoreactor with an immobilized layer of TiO₂ (total volume of the liquid 5000 cm ³, photoactive area 60 cm long and 30 cm wide; irradiation source UV lamps Eversun, Osram, light intensity from 0.9 to 6.2×10⁻⁹ Einstein cm⁻² s ⁻¹) was tested for the inactivation of Escherichia coli (strain DH5α) and bacteriophage λNM1149. The kinetics of the deactivation were approximately first order and the initial reaction rate depended on the light intensity. At maximum intensity, the rate constants of the bacteria and viruses inactivation were 2.3×10⁻⁴ and 7.2×10⁻⁴ s⁻¹, respectively. Bacterial inactivation was also accomplished with solar excitation. © 1999 Society of Chemical Industry     

The Role of Filippi’s Glands in the Silk Moths Cocoon Construction

Filippi’s glands (FGs), formerly also called Lyonet’s glands, are accessory secretory structures of the labial (silk) glands of lepidopteran caterpillars, which were implicated to play an important role in the maturation of the silk material and the construction of the cocoon. In our previous study, we have identified several species of giant silk moths that completely lack the FGs. Interestingly, the absence of FGs in these species correlates with the construction of a loose cocoon architecture. We investigated the functions of FGs by their surgical extirpation in the last instar larvae of the silkworm, Bombyx mori. We found that the absence of FGs altered the structure of the resulting cocoon, in which the different layers of silk were separated. In further experiments, we found no effects of the absence of FGs on larval cocoon formation behavior or on changes in cocoon mass or lipid content. Differential proteomic analysis revealed no significant contribution of structural proteins from FGs to silk cocoon material, but we identified several low abundance proteins that may play a role in posttranslational modifications of some silk proteins. Proteomic analysis also revealed a difference in phosphorylation of the N-terminal sequence of fibroin-heavy chain molecule. Thus, FGs appear to affect silk stickiness during spinning by regulating posttranslational modifications. This could also explain the link that exists between the absence of these glands and the formation of loose cocoons in some giant silk moth species.     

Polymers from renewable resources: XIX: Synthesis and characterization of copolymers from cardanyl acrylate and vinyl monomers

A large number of copolymers have been prepared from cardanyl acrylate on suspension polymerisation with vinyl monomers like methyl acrylate, ethyl acrylate, butyl acrylate, etc. These copolymer beads are almost uniform in size. Infrared spectral and swelling behaviour studies explain their various characteristics. The thermal behaviour of the copolymer beads has been studied with the help of a new computer method known as the LOTUS package method.