Evaluation of the tensile and fatigue behaviourof a powder metallurgy beryllium/aluminium alloy

The tensile and fatigue behaviour of a powder metallurgy beryllium/aluminium alloy produced by Brush Wellman (Albemet 562) is determined as a function of temperature. The material is shown to have very high stiffness/density compared with common structural materials and moderate strength up to 232°C. The mechanical properties of the material do not vary significantly as a function of orientation for the extruded plate evaluated in this study. The stiffness of the material can be readily explained using standard composite theory, where the material is treated as a beryllium particle-reinforced aluminium matrix composite. To explain the observed strength levels, a combination of microstructural-based dislocation strengthening mechanisms is proposed to act in combination with continuum mechanics strengthening based on load transfer. Failure analysis reveals that the aluminium regions of the material fail in a ductile dimple fashion, while the beryllium regions exhibit a more brittle cleavage type failure. Fatigue failure was found to initiate at inclusions present in the material, but is still very high relative to conventional aluminium alloys. This revised version was published online in November 2006 with corrections to the Cover Date.     

Densification involved in the UV-based photosensitivity of silicaglasses and optical fibers

A comprehensive survey of photosensitivity in silica glasses and optical fiber is reviewed. Recent work on understanding the mechanisms contributing to germanium or aluminum doped fiber photosensitivity is discussed within the framework of photoelastic densification models     

A wafer level monitoring method for plasma-charging damage usingantenna PMOSFET test structure

A novel monitoring method for plasma-charging damage is proposed. This method performs a quick and accurate evaluation using antenna PMOSFET. It was found that not only hot-carrier (HC) lifetime but transistor parameters such as initial gate current and substrate current were changed according to the degree of plasma-charging damage. However, the present work suggests that monitoring the shift of drain current after a few seconds of HC stress is a more accurate method to indicate plasma-charging damage. The monitoring method using the present test structure is demonstrated to be useful for realizing highly reliable devices     

A phenomenological model for giant magnetoresistance hysteresis inmagnetic discontinuous multilayer films

A simple phenomenological model for giant magnetoresistance (GMR) is employed for current and field parallel (CIP) to the magnetic multilayer planes in ordinary and discontinuous multilayer films. To our knowledge, it is the first model to include hysteresis in the field (H) dependence of the GMR. The computed GMR versus H curves qualitatively reproduce the GMR hysteresis seen experimentally. In particular, two GMR peaks are found to be symmetrically placed about H=0, and the GMR hysteresis curve itself is found to have an inverted butterfly shape. Also seen in the computed results is the general increase in GMR magnitude found for annealed discontinuous multilayer films. Various parameter variations are examined in the computed results. While the model reproduces GMR hysteresis quite well and the general increase in GMR for discontinuous multilayer films, it does not, in its present form, account for the oscillations seen in the GMR when the nonmagnetic layer thicknesses are varied, which is expected as a strictly quantum mechanical result     

Water sorption of glycol-modified cross-linked gelatin-based hydrogels

The water sorption behaviour of several cross-linked gelatin-based systems were investigated and compared. The systems were gelatin, gelatin/ethyleneglycol, gelatin/polyoxypropylenediamine, and gelatin/polyethylene oxide. For all the systems, an increased water gain was obtained by raising the concentration of the second component, while the swelling was reduced by an increase of the cross-linking density. This revised version was published online in November 2006 with corrections to the Cover Date.     

Determinants of national media attention

This study employed two perspectives to investigate media attention given women congressional candidates. The first perspective is that media attention may be explained by typical and normal media processes, such as focusing on incumbents. The second perspective considers a partisan explanation in which media attention is weighted more to Democratic candidates than Republican candidates. This study employs two established sources, Vanderbilt's Television News Index and Abstract and Information Access's National Newspaper Index , to examine the national media attention of Democratic and Republican women congressional candidates in 1990 and 1992. The investigation determined that media attention is related to whether the candidates are running for the Senate or House, incumbency, and state population. The results also reveal that party is a statistically significant factor associated with media attention. The investigation also determined that ethnic candidates tend to receive slightly less attention from the print media than nonethnic candidates.     

Four-channel polarization-insensitive optically transparent wavelength converter

Multichannel wavelength converters may be important components in the cross-connects in future wavelength-division multiplexed (WDM) transport networks. We demonstrate a multichannel, polarization-insensitive, optically transparent wavelength converter, based on four-wave mixing in two semiconductor optical amplifiers in a polarization-diversity arrangement. Bit-error-rate (BER) measurements with four input 2.5-Gb/s WDM channels, spaced by 2 nm, show penalties for wavelength conversion less than 2.6 dB at 10/sup -9/ BER. Changes in the state of polarization of the input signals cause the output power to change by less than 1.2 dB, and the corresponding power penalties change by less than 0.9 dB.     

Wavelength selection for low-saturation pulse oximetry

Conventional pulse oximeters are accurate at high oxygen saturation under a variety of physiological conditions but show worsening accuracy at lower saturation (below 70%). Numerical modeling suggests that sensors fabricated with 735 and 890 nm emitters should read more accurately at low saturation under a variety of conditions than sensors made with conventionally used 660 and 900 nm band emitters. Recent animal testing confirms this expectation. It is postulated that the most repeatable and stable accuracy of the pulse oximeter occurs when the fractional change in photon path lengths due to perturbations in the tissue (relative to the conditions present during system calibration) is equivalent at the two wavelengths. Additionally, the penetration depth (and/or breadth) of the probing light needs to be well matched at the two wavelengths in order to minimize the effects of tissue heterogeneity. At high saturation these conditions are optimally met with 660 and 900 nm band emitters, while at low saturation 735 and 890 nm provide better performance     

Development of severe secondary hypertension in a patient with systemic entomophthoromycosis

The sudden onset of hypertension mandates investigation for secondary causes. We report the case of a young man with a very rare systemic fungal disease that included massive unilateral perirenal adenopathy. Treatment was associated with the abrupt onset of severe hypertension. Imaging studies suggested progressive constriction of one kidney with treatment, presumably as a result of healing adenopathy. We suggest that this case is a new example of hypertension secondary to constrictive perinephritis (Page kidney).