Vinyl‐containing silicone resin as the crosslinking agent of heat‐curable silicone rubber

Heat‐curable silicone rubber (HCSR) was prepared by using vinyl‐containing silicone resin (VSR) as the crosslinking agent instead of polyvinylsilicone oil (C gum). Mechanical properties and crosslink density of the vulcanizates were measured. The results indicate that VSR is a good crosslinking agent for HCSR. The tensile strength, tearing strength, elongation at break, and hardness of the vulcanizate can reach 10.2 MPa, 29.1 kN/m, 720%, and 58 SHA, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3123–3127, 2002; DOI 10.1002/app.10054     

Synthesis and Morphology of TiO2 Nanotube Arrays by Anodic Oxidation Using Modified Glycerol-Based Electrolytes

Titanium dioxide (TiO₂) nanotube arrays were prepared by electrochemical anodization of titanium sheets in the glycerol 176 mL/H₂O 44 mL/NH₄F 0.5 wt% electrolytes modified with H₂SO₄ and NaAc addition. The surface morphologies, average inner diameter, and the length of the nanotube arrays changed with the solution pH in the range from 5.6 to 4.0 by adding H₂SO₄. A uniform surface morphology of the nanotubes with average inner diameter of ∼80 nm and a length of ∼1000 nm was obtained when the solution pH was 5.0. The growth rates of the nanotubes were remarkably enhanced by NaAc addition in the range of 0.04–0.14 M . With NaAc addition of 0.10 M , the length of the nanotube arrays reached 4.16 μm after an 8-h anodization, increasing 3.23 μm compared with no NaAc addition. The relationship between solution pH and growth of TiO₂ nanotubes was analyzed by current–time curves, solution electrical conductivities, and scanning electron microscopy (SEM), and the role of NaAc was also discussed based on SEM and solution electrical conductivities.     

A growth mark method for studying growth mechanism of carbon nanotube arrays

A novel and simple growth mark method was developed to make marks during the growth process of carbon nanotube arrays. These marks can be read out under scanning electron microscope or optical microscope. Based on this method, the growth rates at different temperatures and under different acetylene partial pressures were measured, from which the activation energy and the order of reaction were determined. Based on our experimental results, the growth of carbon nanotube arrays in our experimental condition could not be diffusion-limited. The measured activation energy could possibly be attributed to the heterogeneous decomposition of acetylene over the catalyst particle. Furthermore the marked array with special segmental structure may be found some applications in the future.     

The kinetics of B‐a and P‐a type copolybenzoxazine via the ring opening process

The structure of benzoxazines is similar to that of phenolic resin through thermal self‐curing of the heterocyclic ring opening reaction that neither requires catalyst nor releases any condensation byproduct. These polybenzoxazine resins have several outstanding properties such as high thermal stability and high glass transition temperature. To better understand the curing kinetics of this copolybenzoxazine thermosetting resin, dynamic and isothermal differential scanning calorimetry measurements were performed. Three models, the Kissinger method, the Flynn–Wall–Osawa method, and the Kamal method, were used to describe the curing process. Dynamic kinetic activation energies based on Kissinger and Flynn–Wall–Osawa methods are 72.11 and 84.06 KJ/mol, respectively. The Kamal method based on an autocatalytic model results in a total order of reaction between 2.66 and 3.03, depending on curing temperature. Its activation energy and Arrhenius preexponential are 50.3 KJ/mol and 7959, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 730–737, 2005     

Mathematical model of deoxidization with post stirring in a combined blowing converter

Dissolved oxygen in the steel at the terminal of the converter smelting process is the main cause for the formation of oxide inclusions, and the high terminal oxygen content worsens the steel cleanness. However, post stirring in a combined blowing converter can promote the carbon-oxygen reaction in the liquid steel and reduce the dissolved oxygen content at the terminal of the converter smelting process. Thus, the mathematical model of deoxidization in the post stirring process was obtained, and the rationa...     

建设工程涉外设计合同风险防范

中国参加WTO后,在扩大对外开放、拉动内需保增长政策指导下,一大批重点建设工程陆续上马,有许多外国设计企业及其在华机构加入中国建设工程的设计,其中,国有独资项目占据很大的比重。笔者结合参与全国十运会场馆一南京奥体中心以及江苏省人民医院扩建、南京图书管等多个大型项目工程全程法律保障实践,就工程设计合同风险防范,一舒管见。     

美国密歇根州三所学院的办学理念与特色分析

办学理念和办学特色对学校的生存和发展起着至关重要的作用。本文在分析美国大学的发展历程与办学理念演变的基础上,重点介绍了三所美国学院的办学理念和办学特色,希望对我们的高等教育教学改革能有所启示。     

Study on early warning index of spatial deformation for high concrete dam

Owing to the deficiency in early warning for high concrete dam,a formula was established to characterize the deformation behavior of high concrete dam as a whole.The early warning index of spatial deformation was calculated by low probability principle on the basis of the deformation entropy formula proposed.The steps were as follows.Firstly,the probability method was utilized to define the degree of order and degree of chaos for each survey point.Secondly,the weight distribution among the survey points was...     

仿土质专用肥的开发和应用前景

本文介绍了基于某些名、优农产品在其生长过程中所需要的特定敏感元素,配制出“仿土质”专用肥。经施用证明,肥效显著,经济效益可观,具有推广应用的前景。     

Synthesis and photoconductivity study of phthalocyanine polymers. I. PAA–CuPc(NO2)2

Cu–dinitro–diamino phthalocyanine was synthesized and converted to the diazonium salt. Polyacrylamide bonded CuPc(NO₂)₂ [PAA–CuPc(NO₂)₂] (I) was synthesized by hot polymerization of acrylamide and this diazonium salt. Polymer(I) is water soluble and contains about 7 mol % CuPc(NO₂)₂ rings, which are covalently bonded to PAA. Polymer(I) shows good photoconductivity, which is much better than that of the corresponding phthalocyanine monomers. By doping with iodine (I₂), the photosensitivity of polymer(I) is increased, which through fluorescence analysis is explained by the fact that a charge–transfer complex (CTC) of polymer(I) with I₂ is formed. The influence of interface layer (IFL) and charge–transportation material (CTM) on the photoconductivity of polymer(I) were also studied.