用红外热象技术研究有凸台热源倾斜板的散热

本文介绍红外热象技术在工程热物理研究中某些应用的探索。作为实例，通过热象技术，实验研究了具有水平凸台离散热源的倾斜板的散热，在研究它的自然对流换热部份结合利用激光全息干涉技术。此间着重于分析倾斜角对散热的影响。     

Principles for radiation of time-harmonic elementary current in magnetized electron plasma half-space

The radiation emitted by a time-harmonic elementary current in magnetized electron plasma half-space, bounded by an ideal electric plane, is investigated using an exact formulation. It is found that: conventional image principle holds for vertical magnetization case; while for parallel magnetization case, coupled image principle seems to be valid.     

LaCrMnNiO系热敏陶瓷的微观结构控制

通过对不同配方、工艺下的ＬａＣｒＭｎＮｉＯ系热敏陶瓷的微观结构研究，指出材料的相组成对其宏观电性能的影响，并提出了通过复合工艺利用“过渡相”的形成，对材料的“最终相”加以控制的方法。文中列出了使用ＸＲＤ及ＸＰＳ手段对材料微观结构的分析结果及有关电性能的测试数据。     

Pentacene-based organic thin-film transistors

Organic thin-film transistors using the fused-ring polycyclic aromatic hydrocarbon pentacene as the active electronic material have shown mobility as large as 0.7 cm²/V-s and on/off current ratio larger than 10⁸; both values are comparable to hydrogenated amorphous silicon devices. On the other hand, these and most other organic TFT's have an undesirably large subthreshold slope. We show here that the large subthreshold slope typically observed is not an intrinsic property of the organic semiconducting material and that devices with subthreshold slope similar to amorphous silicon devices are possible     

An approach to the identifiable parameters of a manipulator

This article deals with the minimal parameters of a manipulator in the least squares sense, so that the minimal parameters are equivalent to the identifiable parameters. The least squares concept is used to introduce terminology for the minimal linear combinations (MLCs) of the system parameters that define a set of linear combinations of the system parameters. The number of elements of the set is minimal, yet the set still completely determines the system. Furthermore, it is shown that the problem of finding a set of MLCs of a manipulator can be simplified to that of finding two individual sets of MLCs that determine the entries of the inertia matrix and the gravity load. Although the approach is applied to the inertia constants of composite bodies to obtain a set of MLCs identical to an earlier one, the result is newly interpreted in the least squares sense. The approach itself is a new method for finding the identifiable parameters of a manipulator, and it yields some new insight into the manipulator dynamics. The crucial feature is that a set of MLCs found by using the present approach is guaranteed to be identifiable. The earlier approaches always require an identification method to verify the results. An equivalence theorem is also presented that rigorously states the equivalence between the different sets of minimal parameters. © 1994 John Wiley & Sons, Inc.     

潘庄引黄灌区泥沙处理对策探讨

潘庄引黄灌区在多年的引黄泥沙处理利用工作中,探索并总结出一套适合灌区特点的泥沙处理模式,取得了较好的效果。主要针对灌区引黄灌溉中的泥沙处理问题,在综述了灌区泥沙处理和利用的现状和新形势下传统泥沙处理方式所存在问题的基础上,从自然条件、工程条件等方面进行泥沙处理的探讨。     

石油钻机提升系统穿绳方法研究

目前国内外钻机大绳一般采用顺穿法或花穿法。分析了2种穿绳方法的受力特点,大绳顺穿时游车的受力不平衡,会发生倾斜和摆动;采用大绳花穿方法,避免了游车的倾斜和摆动,但造成大绳入轮槽的倾角大,大绳易脱槽。顺穿法一般在电动钻机上采用,主要考虑到电控操作提升系统比较平稳;花穿法一般在机械钻机上使用,以受力平衡来缓解气控操作带来的冲击载荷的影响。为了克服这2种穿绳方法的不足,提出了两行双联滑轮组顺穿法和双联滑轮组顺穿法,可以提高安全性,减少磨损。     

Separating inviscid flows

Summary The separating flow of an inviscid fluid is not only a limit solution of the steady separating, laminar fluid flow at high values of the Reynolds number but it is also part of its structure (Smith [1], [2]). This work aims at reexamining the separating flow of inviscid fluid past a bluff body which is fixed in an otherwise uniform stream of fluid. For the purpose of this paper we will assume that the bluff body is a circular cylinder but the theory is applicable to bodies of any shape. It is further assumed that the fluid is in steady two-dimensional motion and is inviscid and of constant density. The flow structure is assumed to consist of a separated flow region, caviting flows in which there exists a free surface on which the pressure is constant, and a wake. A twin spiral vortex model is used in order to determine the shape of the free streamline. Based on the free streamline theory the problem reduces to solving a mixed boundary value problem and a Hilbert solution for the inverse problem in the auxiliary plane is obtained. When we consider the flow in the physical plane the problem is transformed into a direct problem in which the geometry of the solid body is given in advance. We assume that the separation is smooth and thus the curvature of the free streamline at the point of free detachment be equal to that of the body surface. A numerical method for solving the two-dimensional potential flows past arbitrarily shaped curved bluff bodies is developed.When the cavitation number is zero the angle of separation is approximately 55° and the computed results predict that the position of the separation point will move backward as the cavition number increases. The relationships between the drag coefficient, and the width and length of the cavity is determined and is found to be in very good agreement with the predictions of Smith [1].     

A Novel Athermal 40-Channel DWDM Multi/Demultiplexer Based on the Combination of AWGs and Interleaver

An athermal 40-channel dense wavelength-division-multiplexing multi/demultiplexer using a novel combination technology is proposed. It consists of one 1times4 100- to 400-GHz spacing interleaver filter and four sub-arrayed-waveguide gratings (AWGs). The temperature-dependent wavelength shift of the combined device is successfully suppressed to 0.058 nm in the -20degC to 70degC temperature range. Moreover, the combined device's adjacent crosstalk (typically -35 dB) is much better than conventional AWGs (typically -25 dB).