工业项目的海绵城市建设标准与技术要点

工业用地是城市建设用地的主要类型之一,是海绵城市建设的重要区域。通过梳理工业项目硬化面积高、径流污染程度高等特征,针对性提出其海绵城市建设的实施路径、建设标准和技术应用等实施建议。工业项目的海绵城市设计应遵循因地制宜的原则,应合理布局绿地并建设海绵设施,通过精细化的标高设计进行径流组织设计;对于降雨径流污染严重的三类工业项目,其海绵措施应以雨水调蓄池(应急事故池)为主,严禁设置具有渗透功能的源头控制设施。对于三类工业项目,海绵城市所提出的年径流总量控制率的目标与事故池的环保要求基本一致,建议相关部门在制定(修订)的应急事故池设计标准时,其中的径流污染控制体积可与对应区域年径流总量控制率标准协同一致。     

国产羟丙基甲基纤维素在高聚合度聚氯乙烯生产中的应用

介绍了国产羟丙基甲基纤维素替代进口羟丙基甲基纤维素在高聚合度聚氯乙烯聚合中的应用,考察了两种羟丙基甲基纤维素对高聚合度聚氯乙烯树脂各项指标的影响.结果 表明,国产羟丙基甲基纤维素替代进口羟丙基甲基纤维素是可行的.     

粗糙集理论及其在图像处理中的应用*

首先描述了粗糙集理论的基本概念,包括粗糙集知识表示方法和粗糙集约简理论;叙述了粗糙集理论及其与其他非线性理论相结合在图像处理中的应用情况;最后指出了粗糙集理论应用于图像处理的基本思路,并指出将粗糙集理论与其他非线性理论相结合应用于图像处理,将会产生更加有效的结果.     

硫化胶中炭黑燃烧特性的研究

研究硫化胶中炭黑燃烧特性与对应炭黑原材料特性的关系,利用两者间的关系分析不同硫化胶中的炭黑品种,评价炭黑分散性。结果表明:硫化胶中炭黑燃烧特征温度与对应炭黑的压缩吸油值和氮吸附表面积均呈显著线性关系,相关因数分别为0.806 9和0.954 1;根据炭黑燃烧特征温度及线性回归方程推导出硫化胶中炭黑的压缩吸油值和氮吸附表面积,可以判定硫化胶中的炭黑品种;硫化胶中炭黑燃烧特征温度低,在一定程度上可以表明炭黑分散性良好。     

光伏发电接入对配电网低压台区线损的影响

随着可再生能源的不断开发,越来越多的光伏发电接入配电网,而光伏发电的不稳定性会对配电网的稳定造成影响。为此,针对光伏发电对配电网低压台区线损的影响,建立了电源接入模型并进行了仿真计算。     

Molecular Dynamics Simulations Based on 1-Phenyl-4-Benzoyl-1-Hydro-Triazole ERRα Inverse Agonists

Estrogen-related receptor α (ERRα), which is overexpressed in a variety of cancers has been considered as an effective target for anticancer therapy. ERRα inverse agonists have been proven to effectively inhibit the migration and invasion of cancer cells. As few crystalline complexes have been reported, molecular dynamics (MD) simulations were carried out in this study to deepen the understanding of the interaction mechanism between inverse agonists and ERRα. The binding free energy was analyzed by the MM-GBSA method. The results show that the total binding free energy was positively correlated with the biological activity of an inverse agonist. The interaction of the inverse agonist with the hydrophobic interlayer composed of Phe328 and Phe495 had an important impact on the biological activity of inverse agonists, which was confirmed by the decomposition of energy on residues. As Glu331 flipped and formed a hydrogen bond with Arg372 in the MD simulation process, the formation of hydrogen bond interaction with Glu331 was not a necessary condition for the compound to act as an inverse agonist. These rules provide guidance for the design of new inverse agonists.     

A Dual Physical Cross-Linking Strategy to Construct Tough Hydrogels with High Strength,Excellent Fatigue Resistance,and Stretching-Induced Strengthening Effect

Hydrogels with excellent stiffness, toughness, anti-fatigue, and self-recovery properties are regarded as promising water-containing materials. In this work, a dual physically cross-linked (DPC) sodium alginate (SA)/poly[acrylamide (AAm)-acrylic acid (AAc)-octadecyl methacrylate (OMA)]-Fe³⁺ hydrogel is reported, which is constructed by hydrophobic association (HA) and ionic coordination (IC). The optimal DPC hydrogel demonstrates excellent mechanical performance: tensile modulus of 0.65 MPa, tensile strength of 3.31 MPa, elongation at break of 1547%, and toughness of 27.8 MJ m^–3. SA/P(AAm-AAc-OMA)-Fe³⁺ DPC hydrogels also exhibit prominent anti-fatigue and self-recovery performance (99.1–109.7% modulus recovery and 90.4–108.9% dissipated energy recovery after resting for 5 min without additional stimuli at ambient temperature) through the reconstruction of reversible physical cross-linking. Some of the SA/P(AAm-AAc-OMA)-Fe³⁺ DPC hydrogels even exhibit a stretching-induced strengthening effect, which is similar to the performance of muscle—“the more training, the more strength.” Hence, the combination of HA and IC will provide an effective approach to design DPC hydrogels with desirable mechanical performances and a longer service life for wider applications of soft materials.     

Crack initiation and propagation induced by inclusions in a nickel-base P/M superalloy under fatigue load

1 IntroductionRecently the key components in advanced aircraftengines are widely made of nickel-base P/M super-alloy. However, non-metallic inclusions are intro-duced into this material during powder metallurgyprocessing. In industry, although many method…     

粉末冶金法制备云母/羟基磷灰石玻璃陶瓷

为了获得良好的可加工性和生物活性,采用粉末冶金法制备了云母/羟基磷灰石玻璃陶瓷.随着烧结温度的提高,材料的力学性能有所增加.在1100℃下、保温1.5 h可以获得材料的最佳力学性能,其相对密度、抗弯强度和断裂韧性分别为95%、124 MPa和2.1 MPa·m1/2.随着温度的提高,烧结过程中玻璃相的扩散速度加快并填充到剩余的孔隙中,使得材料的相对密度增加,从而提高了材料的抗弯强度.断裂韧性的提高来源于材料中高长径比的云母晶体相互交错的微观结构.     

Cu-Fe-Cr原位复合材料的纤维相结构

通过感应熔炼和冷拔变形制备了Cu 16Fe 2Cr原位复合材料 ,将铜基体选择腐蚀后提取出了纤维 ,采用SEM和TEM观察分析了纤维相结构。在较低的应变量 (η =1.6 7)时 ,纤维不均匀 ,随着变形量的增大 (η =5 .42 ) ,纤维外形变得均匀。在 η =5 .42时 ,一个显著的特点是单根Fe Cr纤维分为一些由晶界隔开的平行亚单元 (宽度约为 10 0nm) ,通过亚单元共同的 [110 ]衍射获得了晶粒之间的相对取向 ,相邻晶粒的取向角在 3°～ 15°之间。