Mapping inland water carbon content with Landsat 8 data

Landsat 8 is the first Earth observation satellite with sufficient radiometric and spatial resolution to allow global mapping of lake CDOM and DOC (coloured dissolved organic matter and dissolved organic carbon, respectively) content. Landsat 8 is a multispectral sensor however, the number of potentially usable band ratios, or more sophisticated indices, is limited. In order to test the suitability of the ratio most commonly used in lake carbon content mapping, the green–red band ratio, we carried out fieldwork in Estonian and Brazilian lakes. Several atmospheric correction methods were also tested in order to use image data where the image-to-image variability due to illumination conditions would be minimal. None of the four atmospheric correction methods tested, produced reflectance spectra that matched well with in situ measured reflectance. Nevertheless, the green–red band ratio calculated from the reflectance data was in correlation with measured CDOM values. In situ data show that there is a strong correlation between CDOM and DOC concentrations in Estonian and Brazilian lakes. Thus, mapping the global CDOM and DOC content from Landsat 8 is plausible but more data from different parts of the world are needed before decisions can be made about the accuracy of such global estimation.     

Ornamentation and Structure in the Representation of Renaissance Architecture in Spain

In the Renaissance, geometric perspectives became a method of architectural reasoning. We look at two works: a painting attributed to Pedro Berruguete and an engraving by Juan Bautista Villalpando in order to to discover the complex relationship between geometry and architecture, and in particular, the form of representation. Our analysis is based on the idea that geometric perspective meant architecture of the period was capable of graphically controlling reality through a high degree of geometric precision.     

Hancornia speciosa latex for biomedical applications: physical and chemical properties,biocompatibility assessment and angiogenic activity

The latex obtained from Hancornia speciosa is used in folk medicine for treatment of several diseases, such as acne, warts, diabetes, gastritis and inflammation. In this work, we describe the biocompatibility assessment and angiogenic properties of H. speciosa latex and its potential application in medicine. The physical–chemical characterization was carried out following different methodologies (CHN elemental analyses; thermogravimetric analyses and Fourier transform infrared spectroscopy). The biocompatibility was evaluated through cytotoxicity and genotoxicity tests in fibroblast mouse cells and the angiogenic properties were evaluated using the chick chorioallantoic membrane (CAM) assay model. The physical–chemical results showed that the structure of Hancornia speciosa latex biomembrane is very similar to that of Hevea brasiliensis (commercially available product). Moreover, the cytotoxicity and genotoxicity assays showed that H. speciosa latex is biocompatible with life systems and can be a good biomaterial for medical applications. The CAM test showed the efficient ability of H. speciosa latex in neovascularization of tissues. The histological analysis was in accordance with the results obtained in the CAM assay. Our data indicate that the latex obtained from H. speciosa and eluted in water showed significant angiogenic activity without any cytotoxic or genotoxic effects on life systems. The same did not occur with H. speciosa latex stabilized with ammonia. Addition of ammonia does not have significant effects on the structure of biomembranes, but showed a smaller cell survival and a significant genotoxicity effect. This study contributes to the understanding of the potentialities of H. speciosa latex as a source of new phytomedicines.     

Kriging metamodel management in the design optimization of a CNG injection system

This paper deals with the use of Kriging metamodels in multi-objective engineering design optimization. The metamodel management issue to find the tradeoff between accuracy and efficiency is addressed. A comparative analysis of different strategies is conducted for a case study devoted to the design of a component of the injection system for Compressed Natural Gas (CNG) engines. The computational results are reported and analyzed for a performance assessment conducted with a data envelopment analysis approach.     

Olfactory coordinated area coverage

This paper proposes an olfaction based methodology to automatically cover an unknown area enabling the decoupled cooperation of a group of floor cleaning mobile robots. This method is based on the utilisation of low cost chemical sensors in cleaning mobile robots, in order to differentiate clean from dirty areas. The experimental results show that the use of olfactory capabilities allows to efficiently cover and clean a certain area, and demonstrate the possibility of coordinating several mobile robots without the need of expensive sensing capabilities, map building or complex algorithms for task scheduling.     

An adaptive sharing elitist evolution strategy for multiobjective optimization

Almost all approaches to multiobjective optimization are based on Genetic Algorithms (GAs), and implementations based on Evolution Strategies (ESs) are very rare. Thus, it is crucial to investigate how ESs can be extended to multiobjective optimization, since they have, in the past, proven to be powerful single objective optimizers. In this paper, we present a new approach to multiobjective optimization, based on ESs. We call this approach the Multiobjective Elitist Evolution Strategy (MEES) as it incorporates several mechanisms, like elitism, that improve its performance. When compared with other algorithms, MEES shows very promising results in terms of performance.     

Nonlinear model predictive control of biodiesel production via transesterification of used vegetable oils

The economic performance of an industrial scale semi-batch reactor for biodiesel production via transesterification of used vegetable oils is investigated by simulation using nonlinear model predictive control (NMPC) technology. The objective is to produce biodiesel compliant to the biodiesel standards at the minimum costs. A first-principle model is formulated to describe the dynamics of the reactor mixture temperature and composition. The feed oil and mixture composition are characterized using a pseudo-component approach, and the thermodynamic properties are estimated from group contribution methods. The dynamic model is used by the NMPC framework to predict the optimal control profiles, where a multiple shooting based dynamic optimization problem is solved at every sampling time. Simulation results with the economic performance of an industrial scale semi-batch reactor are presented for control configurations manipulating the methanol feed flow rate and the heat duty.     

Monoclonal antibody for the demonstration by ELISA of antibodies to protein p24 of enzootic bovine leukosis virus in individual and pooled blood serum and milk samples

A sensitive and specific ELISA for the demonstration of antibodies to the protein p24 of enzootic bovine leukosis virus (EBVL) using a 'capture' monoclonal antibody to this protein (MAb p24) was developed. The method is sensitive enough to detect the international reference serum E4/10 in pooled blood serum samples collected from up to 50 cows, or, if a 10-fold concentrate of milk whey is tested, in samples of bulk milk collected from up to 400 cows. The application of MAb p24 has considerably increased not only the sensitivity, but also the specificity of ELISA. Moreover it is possible to differentiate reliably between positive and 'false positive' reagents by testing a suspicious sample in a pair of wells of which one is coated with MAb p24 alone and the other with the complex MAb p24 + EBLV antigen and the subsequent calculation of 'specific absorbance'. This method, showing the highest sensitivity of detection of antibodies to EBLV p24 described so far, can become an effective tool on the sanitation of infected herds as well as in checks of the EBL-free status. A diagnostic kit suitable for commercial manufacture has been devised.     

Direct Monte Carlo simulation of hot-carrier conductivity

We present a Monte Carlo procedure which, by including the mechanism of generation and recombination from impurity centers, enables us to calculate directly from the simulation the field dependent conductivity for the first time. The reliability of the theoretical model has been checked by comparing numerical results with experiments provided by the Montpellier group and performed on p-Si at different acceptor concentrations and temperatures.