The effect of core modelling on the self-force and self-energy of a dislocation

A verification example is solved using a core model recently introduced in a FEM approach to dislocation dynamics. The core model is compared to the more accepted cut-off procedures. It is demonstrated that these procedures give the correct self-force if the cut-off distance is selected properly. The cut-off procedures do however have some grave weaknesses. These limit their usefulness to a restricted number of problems.     

Simulation and experimental analyses of electromagnetic transients behaviors of lightning surge on vertical conductors

Simulation of very fast surge phenomena in a three-dimensional (3-D) structure requires a method based on Maxwell's equations, such as the finite-difference time-domain (FDTD) method or the method of moments, because circuit-equation-based methods cannot handle the phenomena. This paper uses a method of thin-wire representation of the vertical conductor system for the FDTD method which is suitable for the 3-D surge simulation. The thin-wire representation is indispensable to simulate electromagnetic surges on wires or steel frames in which the radius is smaller than a discretized space step used in the FDTD simulation. In this paper, a general surge analysis program named the virtual surge test lab based on the Maxwell's equations formulated by the FDTD method, is used to simulate the surge phenomena of a vertical conductor, including the effects of horizontal wave incidence and vertical wave incidence. Experimental results on the reduced scale model have been presented in order to compare among the simulation results by the FDTD method and the results using numerical electromagnetic code based on the MoM.     

Mössbauer spectroscopic studies of Fe-substituted YIG

Compositional dependence of hyperfine parameters, determined through Mössbauer spectral analysis has been studied for Y_3−xFe_5+xO₁₂ (x = 0.0, 0.1, 0.3 and 0.5) garnet system at 300 K. The Mössbauer spectra have been fitted with three sextets in the ferrimagnetic state corresponding to Fe³⁺ ions at tetrahedral (d), octahedral (a) and dodecahedral (c) sites of the crystal structure. It is observed that isormershift, quadrupole shift and hyperfine field of d-site show no significant variation with Fe³⁺ concentration. The change in hyperfine fields of a- and c-sites with composition (x) has been explained on the basis of strength of exchange integrals, change in isomershift can be understood due to s-electron charge distribution and asymmetric displacement of oxygen ions surrounding the a- and c-sites seems to be responsible for observable quadrupole shift. The magneton number values obtained from magnetization and Mossbauer data are in agreement to those calculated using Neel's three sublattice model of ferrimagnetism.     

Investigation of the geothermal anomaly of Travale (Tuscany) by telluric, magnetotelluric and geomagnetic deep sounding measurements

As part of the European Community research programme telluric, magnetotelluric and geomagnetic deep sounding measurements were undertaken at 40 sites within the geothermal area of Travale. In the period range of 6–10,000 s the telluric field inside the Travale graben is strongly polarized and directed, independent of the period, about parallel to the graben strike. The lateral variation of the telluric field amplitude is determined mainly by the distribution of the rocks (e.g. the central part of the geothermal anomaly inside the graben is correlated with a horst structure of resistive rocks) and an influence of the geothermal anomaly on the telluric field distribution cannot be observed. The apparent resistivity, as well as the phase curves, are rather similar at all sites within the graben, exhibiting 4–40 ohm · m for periods of 10 s and 50–500 ohm · m for periods of 10,000 s in E-polarization. In the period range of 10–100 s the E- and B-polarization of magnetotelluric measurements can be interpreted by the 2-D effect of the Travale graben, while with increasing period the induced current system becomes more and more 3-D below all sites. This limits the determination of the sedimentary cover thickness (max. 2500 m) by 1-D and 2-D model calculations to periods of less than 100 s.     

A dynamic linear programming approach to market allocation of renewable resources in the italian energy system: The case of solar thermal and biogas technologies

In Italy solar thermal energy and energy from biogas are two possible means of reducing dependence on energy imports. Using a multiperiod LP model (MARKAL) the authors assessed the likely potential of both technologies under various circumstances. The study covered the period 1980–2005, in five segments of five years. It focused only on the subsystem of the energy end-uses which can be substituted for by solar thermal and biogas technologies. The overall non-renewable sources which can be saved in 20 years by these technologies total 450 PJ (1 PJ = 10^{1 5} J) if the fuel prices rise at 0 per cent average annual, 1450 PJ if the fuel prices rise at 4.2 per cent average annual, 1860 PJ if the fuel prices rise at 7.2 per cent average annual and 3780 PJ if the fuel prices rise at 15 per cent average annual. However the most competitive technologies appear to be solar water heaters used mainly in the private and commercial sectors and biogas systems used mainly in the agricultural sector. The study was carried out by APRE under ENEA (formerly CNEN) contract and was intended to serve as an analytical basis for establishing an overall development and demonstration strategy for end-use renewable technologies in Italy.     

Compensation of the Piezo-Hall Effect in Integrated Hall Sensors on (100)-Si

Silicon Hall sensors are known to suffer from a long-term drift in the magnetic sensitivity between 1% and 4%, depending on the degree of moisture in the mold compound of the package. This drift is mainly caused by changes of mechanical stress exerted by the plastic package onto the die. We present a system, which continuously measures the relevant stress components, estimates the sensitivity drift, and corrects for it digitally. An individual precalibration versus temperature is necessary to achieve the required level of accuracy. Results from laboratory characterization with pressure cells and lifetime drift during qualification runs show that this system can keep the drift of magnetic sensitivity well below 1%.     

Online monitoring by dynamically refining imprecise models

Model-based monitoring determines faults in a supervised system by comparing the available system's measurements with a priori information represented by the system's mathematical model. Especially in technical environments, a monitoring system must be able to reason with incomplete knowledge about the supervised system, to process noisy and erroneous observations and to react within a limited time. We present MOSES, a model-based monitoring system which is based on imprecise models where the structure is known and the parameters may be imprecisely specified by numerical intervals. As a consequence, only bounds on the trajectories can be derived with imprecise models. These bounds are computed using traditional numerical integration techniques starting from individual points on the external surface of the model's uncertainty space. When new measurements from the supervised system become available, MOSES checks the consistency of this new information with the model's prediction and refutes inconsistent parts from the uncertainty space of the model. A fault in the supervised system is detected when the complete model's uncertainty space has been refuted. MOSES bridges and extends methodologies from the FDI and DX communities by refining the model's uncertainty space conservatively through refutation, by applying standard numerical techniques for deriving the trajectories of imprecise models and by exploiting the measurements as soon as possible for online monitoring. The performance of MOSES is evaluated based on examples and by online monitoring a complex heating system.     

Spannungsintensitätsfaktoren für vollständig umlaufende Oberflächenumfangsrisse in Rohren bei Thermoschockbelastung

Stress Intensity Factors for Complete Circumferential Surface Cracks in Thermally Shocked Pipes In the case of an emergency cooling of a reactor thermal stresses are generated in the pipes of the primary loop, which may be described conservatively as a thermal shock problem. In this paper complete interior circumferential surface cracks loaded by these thermal stresses are considered. By means of the weight function method stress intensity factors were calculated for this loading case.     

Origin of the threshold voltage instability in SiO/sub 2//HfO/sub 2/ dual layer gate dielectrics

The magnitude of the V/sub T/ instability in conventional MOSFETs and MOS capacitors with SiO/sub 2//HfO/sub 2/ dual-layer gate dielectrics is shown to depend strongly on the details of the measurement sequence used. By applying time-resolved measurements (capacitance-time traces and charge-pumping measurements), it is demonstrated that this behavior is caused by the fast charging and discharging of preexisting defects near the SiO/sub 2//HfO/sub 2/ interface and in the bulk of the HfO/sub 2/ layer. Based on these results, a simple defect model is proposed that can explain the complex behavior of the V/sub T/ instability in terms of structural defects as follows. 1) A defect band in the HfO/sub 2/ layer is located in energy above the Si conduction band edge. 2) The defect band shifts rapidly in energy with respect to the Fermi level in the Si substrate as the gate bias is varied. 3) The rapid energy shifts allows for efficient charging and discharging of the defects near the SiO/sub 2//HfO/sub 2/ interface by tunneling.