Stability region bifurcations of nonlinear autonomous dynamical systems: Type‐zero saddle‐node bifurcations

The behavior of stability regions of nonlinear autonomous dynamical systems subjected to parameter variation is studied in this paper. In particular, the behavior of stability regions and stability boundaries when the system undergoes a type‐zero sadle‐node bifurcation on the stability boundary is investigated in this paper. It is shown that the stability regions suffer drastic changes with parameter variation if type‐zero saddle‐node bifurcations occur on the stability boundary. A complete characterization of these changes in the neighborhood of a type‐zero saddle‐node bifurcation value is presented in this paper. Copyright © 2010 John Wiley & Sons, Ltd.     

Development of a finite element analysis tool for fixture design integrity verification and optimisation

Machining fixtures are used to locate and constrain a workpiece during a machining operation. To ensure that the workpiece is manufactured according to specified dimensions and tolerances, it must be appropriately located and clamped. Minimising workpiece and fixture tooling deflections due to clamping and cutting forces in machining is critical to machining accuracy. An ideal fixture design maximises locating accuracy and workpiece stability, while minimising displacements.The purpose of this research is to develop a method for modelling workpiece boundary conditions and applied loads during a machining process, analyse modular fixture tool contact area deformation and optimise support locations, using finite element analysis (FEA). The workpiece boundary conditions are defined by locators and clamps. The locators are placed in a 3-2-1 fixture configuration, constraining all degrees of freedom of the workpiece and are modelled using linear spring-gap elements. The clamps are modelled as point loads. The workpiece is loaded to model cutting forces during drilling and milling machining operations. Fixture design integrity is verified. ANSYS parametric design language code is used to develop an algorithm to automatically optimise fixture support and clamp locations, and clamping forces, to minimise workpiece deformation, subsequently increasing machining accuracy. By implementing FEA in a computer-aided-fixture-design environment, unnecessary and uneconomical “trial and error” experimentation on the shop floor is eliminated.     

Development of composites based on recycled polyethylene/sugarcane bagasse fibers

In this work, sugarcane bagasse fibers were used as filler in composites having recycled high‐density polyethylene (PEr) as matrix. Because of the poor interaction between fibers surface and the PEr, the surface of bagasse was chemically modified. This modification consists of washing with water at 80°C, a mercerization process using sodium hydroxide and acetylation reaction with acetic anhydride. The chemical modification was characterized by Fourier transform infrared–horizontal attenuated total reflectance (FTIR‐HATR) and ¹³C nuclear magnetic resonance spectroscopies (NMR), thermogravimetric analysis (TGA), and scanning electronic microscopy (SEM). The composites were prepared from modified and unmodified fibers into PEr matrix, containing 5, 10, and 20% (w/w) of fiber. The samples were processed by extrusion and molds were prepared by injection process in order to perform mechanical tests. These materials were analyzed by SEM, TGA, and the water uptake was evaluated. Also, their mechanical properties were analyzed. Morphological analysis indicated that the chemical modification of sugarcane bagasse increased the compatibility between matrix and reinforcement. Tensile, flexural, and impact tests showed that the mechanical properties of the composite were improved compared to PEr due to the presence of the fibers. POLYM. COMPOS., 35:768–774, 2014. © 2013 Society of Plastics Engineers     

Desorption‐ and Decomposition‐Based Techniques for the Regeneration of Activated Carbon

Activated carbon (AC) is an adsorbent used in most adsorption processes related to micro removal of pollutants from the water phase, but the application is limited due to high costs and environmental issues related to the disposal after saturation. Different regeneration techniques, reducing costs and minimizing environmental impact, are reported for the reuse of saturated AC. These techniques can be performed via two separate strands: regeneration based only on desorption of adsorbed compounds in AC, or based on the decomposition of pollutants adsorbed on AC. Literature on the regeneration of saturated ACs is reviewed and promising techniques are highlighted. One of the most challenging bottlenecks preventing the commercial application of regeneration technologies is the difficulty of scaling‐up.     

Pre-operational environmental survey at the uranium mine and mill site,Poços de Caldas,Minas Gerais,Brazil

The first Brazilian uranium mine and mill are located on the Poços de Caldas plateau, in the Central State of Minas Gerais. The pre-operational environmental survey was carried out over a period of two years by the Brazilian Nuclear Energy Commission (CNEN), through the Instituto de Radioproteção e Dosimetria (IRD). The selection of the materials to be monitored, the sampling points and the radionuclides to be analysed were based on critical parameters taking into account the meteorological and hydrological characteristics of the site as well as land use. The results obtained are sufficient to characterize the environmental background of the area, and will allow an assessment of the environmental impact due to the operation of the facility and an evaluation of the adequacy of the effluent emmission control measures. In relation to their contribution to the population dose, the results indicated that ²²⁶Ra and ²¹⁰Pb will be the important radionuclides.     

Finite sample properties of Moran's I test for spatial autocorrelation in tobit models

In this note, we investigate the finite‐sample properties of Moran's I test statistic for spatial autocorrelation in tobit models suggested by Kelejian and Prucha. We fill a void in the theoretical literature by investigating the finite sample properties of this test statistic in a series of Monte Carlo simulations, using data sets ranging from 49 to 15,625 observations. We find that the test is unbiased, has considerable power and approximates the asymptotic normal distribution even for medium‐sized sample sizes, empirically confirming the theoretical results of Kelejian and Prucha. However, some caution is needed, since the statistic turns out to be sensitive to misspecification in the form of heteroscedasticity. In such instances the test over‐rejects the null hypothesis, mistaking heteroscedasticity for spatial autocorrelation.     

Effects of Phonon Confinement on Anomalous Thermalization,Energy Transfer,and Upconversion in Ln3+‐Doped Gd2O3 Nanotubes

There is a growing interest in understanding how size‐dependent quantum confinement affects the photoluminescence efficiency, excited‐state dynamics, energy‐transfer and thermalization phenomena in nanophosphors. For lanthanide (Ln³⁺)‐doped nanocrystals, despite the localized 4f states, confinement effects are induced mostly via electron–phonon interactions. In particular, the anomalous thermalization reported so far for a handful of Ln³⁺‐doped nanocrystals has been rationalized by the absence of low‐frequency phonon modes. This nanoconfinement may further impact on the Ln³⁺ luminescence dynamics, such as phonon‐assisted energy transfer or upconversion processes. Here, intriguing and unprecedented anomalous thermalization in Gd₂O₃:Eu³⁺ and Gd₂O₃:Yb³⁺,Er³⁺ nanotubes, exhibiting up to one order of magnitude larger than previously reported for similar materials, is reported. This anomalous thermalization induces unexpected energy transfer from Eu³⁺ C₂ to S₆ crystallographic sites, at 11 K, and ²H_11/2 → ⁴I_15/2 Er³⁺ upconversion emission; it is interpreted on the basis of the discretization of the phonon density of states, easily tuned by varying the annealing temperature (923–1123 K) in the synthesis procedure, and/or the Ln³⁺ concentration (0.16–6.60%).     

FinFET for high sensitivity ion and biological sensing applications

A double-gate (DG) fin field effect transistor (FinFET) is discussed as new label-free ion and biological sensor. Simulations as function of channel doping, geometrical dimensions, operation point and materials investigated the device response to an external potential difference which provides a body threshold voltage modulation. The simulation results presented in this work clearly state the key features for an ultrasensitive FET based sensor: an enhancement low doped and partially gated transistor operating in weak-moderate inversion regime. The optimized sensitivity, obtained when the width of the fin is equal to the gate height (w_NW ∼ h_g), reaches a value of 85% for an extraction current, I_d, of 0.1 μA. These results pave the way for the fabrication process of an innovative CMOS compatible sensing system.     

Evidence for a GABAergic projection from the central nucleus of the amygdala to the brainstem of the macaque monkey: a combined retrograde tracing and in situ hybridization study

The central nucleus of the amygdala is interconnected with a variety of visceral and autonomic nuclei of the brainstem. These include the parabrachial nucleus, the nucleus of the solitary tract, the nucleus ambiguus and the dorsal motor nucleus of the vagus. Despite repeated attempts, neurochemical characterization of the major subcortical connections of the central nucleus has not yet been accomplished. Based on earlier immunohistochemical and in situ hybridization evidence indicating the presence of numerous GABAergic neurons in the macaque monkey central nucleus, we predicted that a sizeable portion of the descending projections may be GABAergic. We tested this hypothesis using a novel double labelling method with gold conjugated WGA-apoHRP as a retrograde tracer and in situ hybridization for detecting the mRNA that encodes the enzyme glutamic acid decarboxylase (GAD67) as a marker for GABAergic cells. Following WGA-apoHRP-gold injections into the brainstem, a large number of retrogradely labelled cells was observed in the medial and lateral divisions of the central nucleus. Of the retrogradely labelled cells observed in the medial division of the central nucleus, approximately half were double-labelled for GAD67 mRNA; about 30% double labelling was observed in the lateral division. These data support the view that a sizeable component of the central nucleus projection to the brainstem is GABAergic.