Deformation of Mesoporous Titania Nanostructures in Contact with D2O Vapor

For many applications, mesoporous titania nanostructures are exposed to water or need to be backfilled via infiltration with an aqueous solution, which can cause deformations of the nanostructure by capillary forces. In this work, the degree of deformation caused by water infiltration in two types of mesoporous, nanostructured titania films exposed to water vapor is compared. The different types of nanostructured titania films are prepared via a polymer template assisted sol–gel synthesis in conjunction with a polymer‐template removal at high‐temperatures under ambient conditions versus nitrogen atmosphere. Information about surface and inner morphology is extracted by scanning electron microscopy and grazing incidence small‐angle neutron scattering (GISANS) measurements, respectively. Furthermore, complementary information on thin film composition and porosity are probed via X‐ray reflectivity. The backfilling induced deformation of near surface structures and structures inside the mesoporous titania films is determined by GISANS before and after D₂O infiltration. The respective atmosphere used for template removal influences the details of the titania nanostructure and strongly impacts the degree of water induced deformation. Drying of the films shows reversibility of the deformation.     

The AT&T Internet Difference Engine: Tracking and viewing changes on the web

The AT&T Internet Difference Engine (AIDE) is a system that finds and displays changes to pages on the World Wide Web. The system consists of several components, including a webcrawler that detects changes, an archive of past versions of pages, a tool called HtmlDiff to highlight changes between versions of a page, and a graphical interface to view the relationship between pages over time. This paper describes AIDE, with an emphasis on the evolution of the system and experiences with it. It also raises some sociological and legal issues.     

Intestinal gas dynamics and tolerance in humans

Carbohydrate-deficient-glycoprotein syndrome type 1 (CDG1; also known as "Jaeken syndrome") is an autosomal recessive disorder characterized by defective glycosylation. Most patients show a deficiency of phosphomannomutase (PMM), the enzyme that converts mannose 6-phosphate to mannose 1-phosphate in the synthesis of GDP-mannose. The disease is linked to chromosome 16p13, and mutations have recently been identified in the PMM2 gene in CDG1 patients with a PMM deficiency (CDG1A). The availability of the genomic sequences of PMM2 allowed us to screen for mutations in 56 CDG1 patients from different geographic origins. By SSCP analysis and by sequencing, we identified 23 different missense mutations and 1 single-base-pair deletion. In total, mutations were found on 99% of the disease chromosomes in CDG1A patients. The R141H substitution is present on 43 of the 112 disease alleles. However, this mutation was never observed in the homozygous state, suggesting that homozygosity for these alterations is incompatible with life. On the other hand, patients were found homozygous for the D65Y and F119L mutations, which must therefore be mild mutations. One particular genotype, R141H/D188G, which is prevalent in Belgium and the Netherlands, is associated with a severe phenotype and a high mortality. Apart from this, there is only a limited relation between the genotype and the clinical phenotype.     

Fluctuation of cardiotocographic tracings during labor in fetal growth retardation

The objective of our study was to analyse the fluctuation of cardiotocographic scores during labor in fetal growth retardation (FGR). The study took place at the University hospital "Principe de Asturias", Alcalá de Henares, Madrid, Spain. 170 at term FGR fetuses and 170 at term fetuses without FGR as control group were compared using modified Fischer scores, which were blindly performed at 3, 5 and 10 cm of cervical dilatation. As results we found out that the mean value of the Fischer score was significantly lower in FGR at 3 cm of cervical dilatation (8.1 +/- 1 vs 8.7 +/- 0.6), as well as at 5 cm (7.6 +/- 0.9 vs 8.1 +/- 0.7) and at 10 cm (6.7 +/- 0.8 vs 7.4 +/- 0.8). Poor prognosis cardiotocograms were also more common in FGR than in the control group in the three cut-offs points studied (7.5% vs 0.6% at 3 cm, 9.8 vs 1.8 at 5 cm and 37.9 vs 11.6 at complete cervical dilatation). The afore mentioned differences were more remarkable as labor advanced. Conclusions are that poor fetal heart rate recordings were detected in FGR at the beginning of labor when compared with control group fetuses and the differences between both groups increased while the labor prolonging.     

Minimum‐variance control of astronomical adaptive optic systems with actuator dynamics under synchronous and asynchronous sampling

Adaptive optic (AO) systems are now routinely used in ground‐based telescopes to counter the effects of atmospheric turbulence. A deformable mirror (DM) generates a correction wavefront, which is subtracted from the turbulent wavefront using measurements of the residual phase provided by a wavefront sensor (WFS). Minimizing the variance of the residual phase defines a sampled data control problem combining a continuous time minimum‐variance (MV) performance criterion with a discrete‐time controller. For a fairly general class of linear time‐invariant DM and turbulence WFS models, this control problem can be transformed into an equivalent discrete‐time LQ optimization problem involving a set of (discrete‐time) control‐sufficient statistics of the incoming continuous‐time turbulence. This paper shows how to constructively solve this MV problem in the presence of DM's dynamics, starting from continuous‐time models of DM and turbulence. This result is extended to the case of asynchronous DM/WFS sampling. An illustrative application to optimal control of tip‐tilt turbulent modes for the European extremely large telescope in the presence of first‐order DM's dynamics is presented. Copyright © 2010 John Wiley & Sons, Ltd.     

Design of UDE‐based controllers from their two‐degree‐of‐freedom nature

The control algorithm based on the uncertainty and disturbance estimator (UDE) is a robust control strategy and has received wide attention in recent years. In this paper, the two‐degree‐of‐freedom nature of UDE‐based controllers is revealed. The set‐point tracking response is determined by the reference model, whereas the disturbance response and robustness are determined by the error feedback gain and the filter introduced to estimate the uncertainty and disturbances. It is also revealed that the error dynamics of the system is determined by two filters, of which one is determined by the error feedback gain and the other is determined by the filter introduced to estimate the uncertainty and disturbances. The design of these two filters are decoupled in the frequency domain. Moreover, after introducing the UDE‐based control, the Laplace transform can be applied to some time‐varying systems for analysis and design because all the time‐varying parts are lumped into a signal. It has been shown that, in addition to the known advantages over the time‐delay control, the UDE‐based control also brings better performance than the time‐delay control under the same conditions. Design examples and simulation results are given to demonstrate the findings. Copyright © 2010 John Wiley & Sons, Ltd.