废胶粉改性沥青性能影响因素研究

分析了制备工艺、胶粉粒径以及外加添加剂对胶粉改性沥青常规使用性能和稳定性的影响。结果表明:在一定的范围内,胶粉粒径细,对沥青性能的改善较好;加入相容剂可改变沥青胶体体系的溶剂化层的结构和性质;交联剂的加入,增大了体系的稳定性。     

Corrected Sum Rule, Generalized Virial Identity and Elementary Excitation Spectrum of Bose–Einstein Condensates at Any Trapped Atom Number

Using a corrected sum rule and a generalized virial identity, we study the analytical expression for entire modes of the collective elementary excitation spectrum in a trapped Bose–Einstein condensate at any atom number. Explicit analytical formulas for the spectrum are obtained for the harmonic traps with both spherical symmetry and axial symmetry using the gaussian approximation for the N-body ground-state wave function of the condensate. These formulas give the simple dependence of all energy levels on the atom numbers, their interaction strength and trap geometry parameters.     

PKI在网络接入控制中的应用

一、前言网络,无论是企业、机构内部网还是公共服务网,都是受保护的资源,只有获得许可、授权的人员或设备才能接入网络接入控制是网络安全的一个重要环节而,接入控制的关键是身份鉴别。目前常用的身份鉴别技术有口令动、态口令生物特征(如指纹)和PKI(PublicKeyInfrastructure),其中PKI具有安全性高、安全功能多样等特点。恰当的网络身份鉴别协议同PKI的结合能够实现安全的网络接入控制。二、EAP-ExtensibleAuthenticationProtocolE A P是为点对点协议(Point-to-PointProtocol,PPP)[1]设计的身份鉴别协议,它采用Request/Response…     

基于模式理论光栅椭偏参数反演的数值模拟

将一种广泛用于求解系统优化问题的方法——正单纯形法，求解光栅的椭偏方程。首先，利用求解光栅的傅立叶模式理论对TE和TM波的复反射系数进行求解。然后计算出其相应的椭偏参数(△，Ψ)，并在该值的基础上加入不同偏差的随机高斯噪声，将加入噪声后的值(△m，Ψm)作为模拟测量值。最后使用优化算法进行反演。通过对几种常用面形光栅椭偏参数的数值模拟，一方面表明傅立叶模式理论计算光栅的椭偏参数不仅精度高。而且速度快；另一方面表明利用正单纯形法得到的光栅参数值很接近于正演时假设的参数值，从而从理论上证明了利用椭偏法测量光栅各种光学参数的可行性。     

End‐Capping as a Method for Improving Carrier Injection in Electrophosphorescent Light‐Emitting Diodes

The electronic properties, carrier injection, and transport into poly(9,9‐dioctylfluorene) (PFO), PFO end‐capped with hole‐transporting moieties (HTM), PFO–HTM, and PFO end‐capped with electron‐transporting moieties (ETM), PFO–ETM, were investigated. The data demonstrate that charge injection and transport can be tuned by end‐capping with HTM and ETM, without significantly altering the electronic properties of the conjugated backbone. End‐capping with ETM resulted in more closely balanced charge injection and transport. Single‐layer electrophosphorescent light‐emitting diodes (LEDs), fabricated from PFO, PFO–HTM and PFO–ETM as hosts and tris[2,5‐bis‐2′‐(9′,9′‐dihexylfluorene)pyridine‐κ²NC_3′]iridium(III ), Ir(HFP)₃ as the guest, emitted red light with brightnesses of 2040 cd m^–2, 1940 cd m^–2 and 2490 cd m^–2 at 290 mA cm^–2 (16 V) and with luminance efficiencies of 1.4 cd A^–1, 1.4 cd A^–1 and 1.8 cd A^–1 at 4.5 mA cm^–2 for PFO, PFO–HTM, and PFO–ETM, respectively.     

机抖激光陀螺抖动机构的温度特性的研究

研究了机抖激光陀螺抖动偏频量与温度之间的关系。通过大量的重复性高低温实验,证明了抖动偏频量与温度的线性关系,并得到了拟合直线表达式。结果表明,抖动偏频量与温度具有较好的线性关系,而且具有较好的重复性。同时用抖动偏频量对陀螺的零漂进行补偿,提高了陀螺的精度。     

H-bond and conformations of donors and acceptors in model polyether based polyurethanes

The molecular mechanics (MM) method with COMPASS force field was used to study the H-bonds in the polyether based polyurethane model molecules. Availability of the calculation was firstly verified in comparison of some H-bonded model molecules, which were studied by using ab initio calculation, and those calculated by MM. Based on a urethane model molecule 1,3-dimethylcarbamate, which can be donor or acceptor and behaves in various conformations, it is reasonable to have a large number of H-bond interactions between various conformational donors and acceptors. For examining all the possible interaction patterns, we studied 57H-bond complexes. This systematic modeling covers well-known four types of interaction patterns, such as NH?OC (Type I), NH?O-CO (Type II), NH?NH (Type III), NH?COC (Type IV) in the system. Obtained H-bond energies were used to analyze the probabilities of the complexes. For the interaction within the hard segments, or Type I, Type II and Type III, a predominant H-bond complex has been found in the present study, which belongs to Type I. For the interaction between the hard segment and the soft segment, two conformations of Type IV were calculated to be existed.     

A note on the Gauss-Jacobi quadrature formulae for singular integral equations of the second kind

A fast and efficient numerical method based on the Gauss-Jacobi quadrature is described that is suitable for solving Fredholm singular integral equations of the second kind that are frequently encountered in fracture and contact mechanics. Here we concentrate on the case when the unknown function is singular at both ends of the interval. Quadrature formulae involve fixed nodal points and provide exact results for polynomials of degree 2n − 1, where n is the number of nodes. Finally, an application of the method to a plane problem involving complete contact is presented.     

优化项目管理MIS系统方案设计

按照工程项目“五制”管理的要求 ,以规范管理和提升工程质量为系统开发的基础和前提 ,探索适合本行业使用的项目MIS系统设计方案 ,并对其功能模型、数据规划、构造处理模型、数学模型进行分析     

一个新颖的轮廓线跟踪算法

提出了一个新颖的基于隐马尔科夫模型与光流的轮廓线跟踪算法。曲线描绘由B样条形状空间向量来表达,能够捕捉全局和局部变形。提出应用沿曲线的光流计算来预测曲线在下一帧的位置,在预测曲线的基础上,提出应用隐马尔科夫模型来准确定位曲线的位置。隐马尔科夫模型提供了一种有效的概率手段来融合多种量测特征比如边缘,曲线平滑性,区域灰度或颜色统计信息等等,能够更准确的定位曲线位置。基于仿射形状空间的实验了表明本文所提出算法的有效性。