Prediction of fire classification for wood based products. A multivariate statistical approach based on the cone calorimeter

Wood has long traditions as a building material, and is often used in construction elements, and as interior and exterior surfaces in the Nordic countries. In most applications, there are reaction to fire requirements to products used as surfaces, e.g. in escape routes and larger public spaces. Most wood products will therefore have to be treated with fire retardant (FR) agents to fulfil the strict requirements to properties connected to heat release and flame spread. Unfortunately, FR agents usually also increase the smoke production, as they cause a more incomplete combustion of the wood. The wood product manufacturers seek to find the optimal amount of FR additives where both heat release and smoke production in the classifying test are within the requirements given in the building regulations. This paper describes models for prediction of the European reaction to fire classes of wood products. The models are based on multivariate statistical analysis, and use test results from the cone calorimeter test as input. The presented models are, with very good precision, able to predict which Euroclass and additional smoke class a wood based product would obtain if it were to be tested in the single burning item test. Copyright © 2006 John Wiley & Sons, Ltd.     

The use of natural essential oils as antimicrobial solutions in paper packaging. Part II

We have assessed the antimicrobial, vapor-phase activity of the following natural essential oils (EOs) when used in paraffin-based “active coatings” for paper packaging materials intended to come into contact with foods: clove (Sygzium aromaticum), cinnamon (Cinnamomum zeylanicum), and oregano (Origanum vulgare) EOs, and cinnamaldehyde-enriched cinnamon EO. To our knowledge, this is the first time that such an approach has been presented for consideration by the scientific community.     

Characterization of a lectin-like protein isolated from Lachesis muta snake venom

A lectin-like protein was isolated from L. muta venom by gel filtration on BIO Gel P-100 followed by column Chromatography on DEAE-sephades A-50. The protein eluted at 0.4 M Nacl in 0.01 Tris pH 7.3 and exhibited agglutinin activity toward 0+ human erythrocytes. The protein is a dimer with Mr 28 kDa. Amino acid analysis revealed high content of tryptophan and acid recidues and low content of cysteine and methionine residues. No neutral carbohydrates and sialic acid were detected. Circular dichroic spectrum shows 78% of B structure and 1% of alpha structure. In vitro experiments with erythrocytes from rat, rabbit and dog revealed strong agglutination while red blood cells from mice, sheep and goat were not agglutinated. In vivo experiments using anesthetized rats, a sharp and prolonged fall in the blood pressure was observed at protein dose of 1.5 mg/kg. Double dose of protein caused the death of the animal.     

Cyclic variations in the permeability of the cell wall of Saccharomyces cerevisiae.

To study cell-cycle-related variations in wall permeability of Saccharomyces cerevisiae, two approaches were used. First, an asynchronous culture was fractionated by centrifugal elutriation into subpopulations containing cells of increasing size. The subpopulations represented different stages of the cell cycle as judged by light microscopy. Cell wall porosity increased when these subpopulations became enriched with budded cells. Secondly, synchronous cultures were obtained by releasing MATa cells from alpha-factor induced G1-arrest. These cultures grew synchronously for at least two generations. The cell wall porosity increased sharply in these cultures, shortly before buds became visible and was maximal during the initial stages of bud growth. It decreased in cells which had completed nuclear migration and before abscission of the bud had occurred. The porosity reached its lowest value during abscission and in unbudded cells. We examined the incorporation of mannoproteins into the wall during the cell cycle. SDS-extractable mannoproteins were incorporated continuously. However, the incorporation of glucanase-extractable mannoproteins, which are known to affect cell wall porosity, showed cyclic oscillations and reached its maximum after nuclear migration. This coincided with a rapid decrease in cell wall porosity, indicating that glucanase-extractable mannoproteins might contribute to this decrease.     

Stoichiometric dye-binding procedure for the determination of the reactive lysine content of soya bean protein

A new analytical method has been developed for the determination of the reactive lysine content of soya bean protein. The method is based on the reaction of the free basic groups of the protein with 1-phenylazo-2 naphthol-6,8 disulphonic acid. With regard to the stoichiometry of the procedure, it has been proved, contrary to earlier reports, that the basic amino acids, histidine, arginine and lysine, each combine with one mole of the dye. After acylation with propionic anhydride lysine alone loses its dye reactivity. The usefulness of the proposed method has been demonstrated by the determination of the reactive lysine content of several untreated, heat-treated and acid-treated soya bean samples. The results show that heat damage of about 5% in reactive lysine content can be measured in 1·5 h with good reproducibility.     

Process-based cost modeling of photonics manufacture: the cost competitiveness of monolithic integration of a 1550-nm DFB laser and an electroabsorptive modulator on an InP platform

The monolithic integration of components holds promise to increase network functionality and reduce packaging expense. Integration also drives down yield due to manufacturing complexity and the compounding of failures across devices. Consensus is lacking on the economically preferred extent of integration. Previous studies on the cost feasibility of integration have used high-level estimation methods. This study instead focuses on accurate-to-industry detail, basing a process-based cost model of device manufacture on data collected from 20 firms across the optoelectronics supply chain. The model presented allows for the definition of process organization, including testing, as well as processing conditions, operational characteristics, and level of automation at each step. This study focuses on the cost implications of integration of a 1550-nm DFB laser with an electroabsorptive modulator on an InP platform. Results show the monolithically integrated design to be more cost competitive over discrete component options regardless of production scale. Dominant cost drivers are packaging, testing, and assembly. Leveraging the technical detail underlying model projections, component alignment, bonding, and metal-organic chemical vapor deposition (MOCVD) are identified as processes where technical improvements are most critical to lowering costs. Such results should encourage exploration of the cost advantages of further integration and focus cost-driven technology development.