Mucociliary clearance and respiratory function in foundry workers

The aim of the study was to establish whether changes occur in respiratory function, particularly mucociliary clearance, among second fusion smeltery workers. The research covered 93 male smelters employed in steel forming and casting and 116 male workers of an electric power station, considered as non-exposed. Physiological, pathological and occupational histories of all subjects under study were available. An ECCS respiratory symptoms questionnaire was administered to all subjects ad the two groups also underwent a general medical examination, a spirometry and a chest X-ray. During the medical examination sputum was collected from the subjects to measure mucus transport rate on frog palate, expressed as Normalised Frog Palate Transport Rate (NFPTR). For the environmental research, dust, fumes and gas samplings were taken either at a fixed station or by means of personal dosimeters. Environmental research revealed very low concentrations of respiratory irritants (total dust: 0.2-6.8 mg/m3; respirable dust: 0.1-4.9 mg/m3; total silica: < 2-15.5%; respirable silica: < 0.004-0.3 mg/m3; iron: 0.008-0.085 mg/m3; chromium and manganese: < 0.001 mg/m3; fumes and gases: well below the TLV. The two groups were homogeneous with regard to age and smoking habits. Exposed workers showed rales, dyspnoea and spontaneous phlegm more frequently than non-exposed workers. NFPTR alterations were checked in 49 out of 81 exposed and in 18 out of 81 non-exposed subjects (chi squared = 22.9; p < 0.001). Stratification of the results according to smoking habits further confirmed the strong association between occupational exposure and NFPTR alterations. Smelters showed significantly lower mean NFPTR values compared to non-exposed subjects; also, the mean value of NFPTR in the exposed was below 0.70, which is considered the lowest individual limit in normal subjects. The only variable which explains a large part of the variability of NFPTR is past work in a smeltery rather than in an electric power station. The spirometries showed that only the mean PEF values were significantly lower among the exposed. Stratified analysis of the results according to smoking habits in the two groups revealed a close association between smeltery work and reduction of PEF to under 80% of the ECCS 1983 theoretical values, independently of smoking habits. We also compared the mean PEF values, both as measured values and as percent values of the ECCS 1983 theoretical values, stratified for occupational exposure and smoking; the results again showed that differences between these mean values were mainly due to current or past work in the foundry.(ABSTRACT TRUNCATED AT 400 WORDS)     

Causality tracking in causal message-logging protocols

Casual message-logging protocols have several attractive properties: they introduce no blocking, send no additional messages over those sent by the application, and never create orphans. Causal message logging, however, does require the casual effects of the deliveries of messages to be tracked. The information concerning causality tracking is piggybacked on application messages, and the amount of such information can become large. In this paper we study the cost of tracking causality in causal message-logging protocols. One can track causality as accurately as possible, but to do so requires piggybacking a considerable amount of additional information. One can reduce the amount of piggybacked information on each message by reducing the accuracy of causality tracking. But then, causal message logging may piggyback the reduced amount of information on more messages. We specify six different methods of tracking causality, each representing a natural choice based on the specification of causal message logging. We describe how these six methods can be implemented and compare them in terms of how large of a piggyback load they impose. This load depends on the application that is using causal message logging. We characterize some applications for which a given method has the smallest piggyback load, and study using simulation the size of the piggyback load for two different models of applications. Received: July 1999 / Accepted: July 2001     

Changes in selected biochemical and sensory parameters as affected by the superficial inoculation of Penicillium camemberti on dry fermented sausages

An atoxigenic strain of Penicillium camemberti was superficially inoculated on fermented sausages in an attempt to improve their sensory properties. The growth of this mould on the surface of the sausages resulted in an intense proteolysis and lipolysis, which caused an increase in the concentration of free amino acids, free fatty acids (FFA) and volatile compounds. Many of these were derived from amino acid catabolism and were responsible for the "ripened flavour", i.e. branched aldehydes and the corresponding alcohols, acids and esters. The development of the fungal mycelia on the surface of the sausages also protected lipids from oxidation, resulting in both lower 2-thiobarbituric acid (TBARS) values and lipid oxidation-derived compounds, such as aliphatic aldehydes and alcohols. The sensory analysis of superficially inoculated sausages showed clear improvements in odour and flavour and, as a consequence, in the overall quality of the sausages. Therefore, this strain is proposed as a potential starter culture for dry fermented sausage production.     

A design methodology for high-order class-D audio amplifiers

This paper presents a design methodology for high-order class-D amplifiers, based on their similarity with sigma–delta ( $\Upsigma\Updelta$ ) modulators, for which established theory and toolboxes are available. The proposed methodology, which covers the entire design flow, from specifications to component sizing, is validated with three design examples, namely a second-order, a third-order, and a fourth-order class-D amplifier. Moreover, the third-order class-D amplifier has been integrated on silicon and characterized, further confirming the validity of the whole design flow. The achieved results demonstrate that high-order class-D amplifiers can achieve total-harmonic-distortion (THD) performance compatible with the specifications of high-end audio applications (THD  ≈ 90 dB), which would be unfeasible with conventional first-order class-D amplifiers.     

Genetic algorithm to design logical topologies in reconfigurable WDM networks

A new method to design logical topologies based on genetic algorithms is presented. Not only does the algorithm determine which nodes should be connected by means of lightpaths with the aim of minimizing congestion, but it also solves the routing and wavelength assignment problem. In this way, the algorithm guarantees that the logical topology obtained can be embedded in the optical network subject to the available set of resources. The algorithm is effective in terms of both congestion and fairness. For instance, when compared with other work, the congestion is significantly reduced (from 20% to 75% depending on the matrix of traffic considered), and the fairness, when evaluated in terms of the Jain index, is generally higher than 0.94. Moreover, the algorithm brings advantages when employed in dynamic scenarios where the logical topology is frequently reconfigured, as it is fast and, in contrast to other algorithms previously proposed, the calculation process can be stopped at any time (if required) in order to give the best virtual topology found up to the moment.

Kinematic viscosity studies of the binary ethane- 1,2-diol/ n,n-dimethylformamide solvent system at various temperatures

Kinematic viscosity data (ν) are presented for ethane-1,2-diol, for N, N-dimethylformamide and for nine binary mixtures in the - 10°C to 80°C temperature range. The experimental data were fitted by several empirical relations such as Grunberg-Nissan (1949), McAllister (1960), Heric (1966), Lobe (1973), Auslander (1964) and polynomial equations. Some considerations regarding the meaning of the obtained adjustment parameters are made. Furthermore, a new best fit equation is proposed and its validity has been compared to that of the other relations on the basis of the reproducibility of the experimental data.     

The raison d'être of constitutively active protein kinases: the lesson of CK2

Protein kinases generally are tightly controlled signaling molecules that are switched on only in response to specific stimuli. Exceptionally few protein kinases are constitutively active, the most striking example being provided by CK2 (formerly "casein kinase 2"). Owing to unique structural features, the catalytic activity of CK2 is constantly on, although its targeting can be deeply influenced by the association of its two catalytic subunits (alpha and/or alpha') with a dimeric non catalytic beta subunit. Constitutive activity of CK2 reflects its extraordinary pleiotropy documented by its growing list of >300 protein substrates and is consistent with emerging evidence that CK2 plays an essential role in the cell by counteracting premature and/or unscheduled apoptosis, thus ensuring cell survival under stress conditions.     

Crystallization kinetics of cis‐1,4‐polybutadiene

The isothermal and nonisothermal crystallization kinetics of cis‐1,4‐polybutadiene has been investigated with respect to the content of cis units and the linearity of the main chain. The rate of spherulite growth increases with chain regularity as the presence of branches as well as segments with different configurations slows the crystallization rate. The major parameter that determines the crystallization rate is the presence in the formulation of heterogeneities that favor the formation of primary nuclei and determine an anticipated onset of crystallization. As the activity of the heterogeneous nuclei depends more on the type and number of foreign particle than on any chain parameter, no straightforward information on the influence of the chain structure on the crystallization rate can be derived by mere calorimetric analysis, at least for analyzed samples. It is only with combined analysis by optical microscopy that comprehensive information on the crystallization kinetics of cis‐1,4‐polybutadiene can be derived. The results reported in this contribution point out the importance, in polymer science, of preferring complementary instrumentation and not limiting experimental investigations to a single technique of analysis. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010