Crystal structures and phase transformation of deuterated lithium imide, Li2ND

Half-Heusler compounds of Sn-doped TiCoSb “TiCoSn_xSb_1−x (x = 0.0, 0.01, and 0.05)” were prepared and their thermoelectric properties were measured above room temperature. From the EDX analysis, all the samples have three phases: the TiCoSn_xSb_1−x, Co-rich, and Ti-rich phases. The values of the thermoelectric power increase with Sn doping, and a positive thermoelectric power is obtained in the sample of TiCoSn_0.05Sb_0.95. The thermal conductivity decreases both with increasing temperature and with Sn content. The maximum value of ZT for p-type material is 0.030 at 988 K in the sample of TiCoSn_0.05Sb_0.95.     

Scalable digital hardware for a trapped ion quantum computer

Quantum Information Processing - Many of the challenges of scaling quantum computer hardware lie at the interface between the qubits and the classical control signals used to manipulate them....     

Validation of GOES and MODIS active fire detection products using ASTER and ETM+ data

In this study we implemented a comprehensive analysis to validate the MODIS and GOES satellite active fire detection products (MOD14 and WFABBA, respectively) and characterize their major sources of omission and commission errors which have important implications for a large community of fire data users. Our analyses were primarily based on the use of 30 m resolution ASTER and ETM+ imagery as our validation data. We found that at the 50% true positive detection probability mark, WFABBA requires four times more active fire area than is necessary for MOD14 to achieve the same probability of detection, despite the 16× factor separating the nominal spatial resolutions of the two products. Approximately 75% and 95% of all fires sampled were omitted by the MOD14 and WFABBA instantaneous products, respectively; whereas an omission error of 38% was obtained for WFABBA when considering the 30-minute interval of the GOES data. Commission errors for MOD14 and WFABBA were found to be similar and highly dependent on the vegetation conditions of the areas imaged, with the larger commission errors (approximately 35%) estimated over regions of active deforestation. Nonetheless, the vast majority (> 80%) of the commission errors were indeed associated with recent burning activity where scars could be visually confirmed in the higher resolution data. Differences in thermal dynamics of vegetated and non-vegetated areas were found to produce a reduction of approximately 50% in the commission errors estimated towards the hours of maximum fire activity (i.e., early-afternoon hours) which coincided with the MODIS/Aqua overpass. Lastly, we demonstrate the potential use of temporal metrics applied to the mid-infrared bands of MODIS and GOES data to reduce the commission errors found with the validation analyses.     

Optimization of clamped circular piezoelectric composite actuators

This paper addresses the design of clamped circular piezoceramic composite unimorph and bimorph configurations, specifically the conflicting requirements of maximum volume displacement for a prescribed bandwidth. An optimization problem is formulated that implements analytical solutions for unimorph and bimorph configurations using laminated plate theory, including the use of oppositely polarized piezoceramic patches. A range of actuator geometric parameters are studied, and bounds for volume displacement and natural frequency of optimal designs are determined and presented via design curves. In the selected design space, Pareto optimization results for unimorph and bimorph configurations show that optimal volume displacement is related to the bandwidth by a universal power law such that the product of the square of the natural frequency and the displaced volume, a “gain-bandwidth” product, is a constant. Characteristic trends are also described that are independent of the actuator radius for the Pareto optimal piezoceramic patch thickness and radius versus normalized bandwidth. The results are relevant, for example, in the design of zero-net mass-flux or synthetic jet actuators used in flow control applications.     

A new,flexible and widely applicable software package for the simulation of one-dimensional moisture flow: SoWaM

Most one-dimensional soil moisture flow simulation models have restricted applicability due to (amongst other things): i) insufficient user flexibility; ii) a lack of user friendliness; iii) dependency on scale, temporal and/or spatial, and iv) fixed boundary conditions. Therefore, we developed a simple and highly flexible software package to simulate, visualize and analyze 1-D moisture flow in soils: SoWaM (Soil Water Model). The package has a modular setup and consists of a range of tools to visualize, analyze and compare input data and results. Soil hydraulic properties for each specified soil layer can be defined by either Van Genuchten parameters or cubical splines. Since the model does not impose limits on element size or time interval, it is possible to perform simulations in very high detail, both spatially and temporally. Furthermore, four different criteria for irrigation scheduling have been implemented. The SoWaM package provides an accurate, simple and highly flexible tool to simulate soil moisture flow and to evaluate the effects of various factors on soil water movement, such as timing and amount of irrigation, soil hydraulic properties and soil layering. Results of a case study are presented to illustrate model performance.     

The use of pervasive sensing for behaviour profiling — a survey

With the maturity of sensing and pervasive computing techniques, extensive research is being carried out in using different sensing techniques for understanding human behaviour. An introduction to key modalities of pervasive sensing is presented. Behaviour modelling is then highlighted with a focus on probabilistic models. The survey discusses discriminative approaches as well as relevant work on behaviour pattern clustering and variability. The influence of interacting with people and objects in the environment is also discussed. Finally, challenges and new research opportunities are highlighted.     

Magnetic quadrupole doublet focusing system for high energy ions

A high energy focused ion beam microprobe using a doublet arrangement of short magnetic quadrupole lenses was used to focus 1-3 MeV protons to spot sizes of 1x1 microm2 and 1-4.5 MeV carbon and silicon ion beams to spot sizes of 1.5x1.5 microm2. The results presented clearly demonstrate that this simple doublet configuration can provide high energy microbeams for microanalysis and microfabrication applications.     

情景感知驱动的移动对象多模式轨迹预测技术综述

如何利用多源异构时空数据进行准确的轨迹预测并且反映移动对象的移动特性是轨迹预测领域的核心问题.现有的大多数轨迹预测方法是长序列轨迹模式预测模型,根据历史轨迹的特点进行预测,或将当前移动对象的轨迹位置放入时空语义场景根据历史移动对象轨迹预测位置.综述当前常用的轨迹预测模型和算法,涉及不同的研究领域.首先,阐述了多模式轨迹预测的主流工作,轨迹预测的基本模型类;其次,对不同类的预测模型进行总结,包括数学统计类、机器学习类、滤波算法,以及上述领域具有代表性的算法;再次,对情景感知技术进行了介绍,描述了不同领域的学者对情景感知的定义,阐述了情景感知技术所包含的关键技术点,诸如情景感知计算、情景获取和情景推理的不同类模型,分析了情景感知的不同分类、过滤、存储和融合以及它们的实现方法等.详细介绍了情景感知驱动的轨迹预测模型技术路线及各阶段任务的工作原理.给出了情景感知技术在真实场景中的应用,包括位置推荐,兴趣点推荐等,通过与传统算法对比,分析情景感知技术在此类应用中的优劣.详细介绍了情景感知结合LSTM (long short-term memory)技术应用于行人轨迹预测领域的新方法.最后,总结了...     

Generalization of the ordinary state-based peridynamic model for isotropic linear viscoelasticity

This paper presents a generalization of the original ordinary state-based peridynamic model for isotropic linear viscoelasticity. The viscoelastic material response is represented using the thermodynamically acceptable Prony series approach. It can feature as many Prony terms as required and accounts for viscoelastic spherical and deviatoric components. The model was derived from an equivalence between peridynamic viscoelastic parameters and those appearing in classical continuum mechanics, by equating the free energy densities expressed in both frameworks. The model was simplified to a uni-dimensional expression and implemented to simulate a creep-recovery test. This implementation was finally validated by comparing peridynamic predictions to those predicted from classical continuum mechanics. An exact correspondence between peridynamics and the classical continuum approach was shown when the peridynamic horizon becomes small, meaning peridynamics tends toward classical continuum mechanics. This work provides a clear and direct means to researchers dealing with viscoelastic phenomena to tackle their problem within the peridynamic framework.     

A particle‐based moving interface method (PMIM) for modeling the large deformation of boundaries in soft matter systems

The mechanics of the interaction between a fluid and a soft interface undergoing large deformations appear in many places, such as in biological systems or industrial processes. We present an Eulerian approach that describes the mechanics of an interface and its interactions with a surrounding fluid via the so‐called Navier boundary condition. The interface is modeled as a curvilinear surface with arbitrary mechanical properties across which discontinuities in pressure and tangential fluid velocity can be accounted for using a modified version of the extended finite element method. The coupling between the interface and the fluid is enforced through the use of Lagrange multipliers. The tracking and evolution of the interface are then handled in a Lagrangian step with the grid‐based particle method. We show that this method is ideal to describe large membrane deformations and Navier boundary conditions on the interface with velocity/pressure discontinuities. The validity of the model is assessed by evaluating the numerical convergence for a axisymmetrical flow past a spherical capsule with various surface properties. We show the effect of slip length on the shear flow past a two‐dimensional capsule and simulate the compression of an elastic membrane lying on a viscous fluid substrate. Copyright © 2015 John Wiley & Sons, Ltd.