An end‐to‐end alternative to TCP PEPs: Initial Spreading,a TCP fast start‐up mechanism

While Transmission Control Protocol (TCP) Performance Enhancing Proxy (PEP) solutions have long been undisputed to solve the inherent satellite problems, the improvement of the regular end‐to‐end TCP congestion avoidance algorithms and the recent emphasis on the PEPs drawbacks have opened the question of the PEPs sustainability. Nevertheless, with a vast majority of Internet connections shorter than ten segments, TCP PEPs continue to be required to counter the poor efficiency of the end‐to‐end TCP start‐up mechanisms. To reduce the PEPs dependency, designing a new fast start‐up TCP mechanism is therefore a major concern. But, while enlarging the Initial Window (IW) up to ten segments is, without any doubt, the fastest solution to deal with a short‐lived connection in an uncongested network, numerous researchers are concerned about the impact of the large initial burst on an already congested network. Based on traffic observations and real experiments, Initial Spreading has been designed to remove those concerns whatever the load and type of networks. It offers performance similar to a large IW in uncongested network and outperforms existing end‐to‐end solutions in congested networks. In this paper, we show that Initial Spreading, taking care of the satellite specificities, is an efficient end‐to‐end alternative to the TCP PEPs. Copyright © 2015 John Wiley & Sons, Ltd.     

GD&T-Based Characterization of Short-Range Non-contact 3D Imaging Systems

We present a series of test metrics, artifacts, and procedures for characterizing and verifying the operating limits of a short-range non-contact three-dimensional imaging system. These metrics have been designed to correspond to dimensioning and tolerancing metrics that are widely used in industry (e.g. automotive, aerospace, etc.). We introduce operating limit metrics that correspond with the geometric dimensioning and tolerancing (GD&T) metrics of Form (Flatness and Circularity), Orientation (Angularity), Location (Sphere, Corner, and Hole Position Errors), and Size (Diameter, Sphere-spacing, Plane-spacing and Angle Errors). An example is presented to illustrate how these metrics, artifacts, and associated test procedures can be used in practice.     

Exposure of several Belgian consumer groups to pesticide residues through fresh fruit and vegetable consumption

The output of a pesticide surveillance program (detection frequency and number of exceeding measures) can lead to unnecessary concern among consumers since they lack information concerning the actual exposure. In this study, the exposure to pesticide residues through fruit and vegetable consumption is evaluated based on the 2008 surveillance data of the Belgian Federal Agency for the Safety of the Food Chain (FASFC).Results (deterministic and probabilistic approach) demonstrate that the chronic exposure of the adult population (>15 years) is generally under control, even at high or frequent consumption of fruit and vegetables. For most of the pesticide residues studied, the exposure is one hundred times lower than the ‘acceptable daily intake’ or ADI. With regard to children (2–5 years) who consume regularly or large amounts of fruit and vegetables, there are however, indications that for some pesticides the ADI can be exceeded. Nevertheless, due to the large uncertainty in these calculations, a more detailed study is required for this vulnerable group of consumers. In addition, it was demonstrated that washing and peeling of fruit and vegetables result in an exposure that is probably five to six times lower.     

Influence of clay in limestone fillers for self-compacting cement based composites

High workability together with a good resistance to segregation is needed for cement based composites, specifically fresh self-compacting mortars (SCM); in this prospect, the amount of coarse materials has to be reduced and replaced by fine material. Several limestone fillers are here compared and analysed. These by-products are issued from different industrial sectors, such as the aggregate and lime production industry (quarrying operations) and the ornamental stones industry (sawing operations).Particular attention has been paid to clay content, as consistency of fresh mortars was varying, while other physical characteristics like granulometry remained the same. Relationship between the physico-chemical properties of the fillers and the properties of fresh and hardened mortars are brought forward. Even if it may affect fresh properties of mortars, results clearly show that clay type and content has minor influence than limestone filler itself.     

Probabilistic evaluation of conformity criteria for concrete families

When only a limited number of test results are available, compressive strength results of concrete family members can be combined in order to enable conformity control on a sufficient number of test results. The principles behind the conformity control of concrete families are explained and an original probabilistic evaluation of conformity criteria for concrete families is introduced. For the calculation of the corresponding operating characteristics, some approximate formulae are presented. Additionally, Monte Carlo simulation techniques are used for more exact calculations. In this way, also autocorrelation between consecutive test results can be taken into account, using an autoregressive process. The current guidelines and conformity criteria for concrete families in EN 206-1 are evaluated and discussed, based on the AOQL concept. Different conformity criteria and transformation methods are described, evaluated and discussed.     

Failure mechanisms in granular media: a discrete element analysis

This paper attempts to numerically validate the concept of diffuse failure using a discrete element method. First, the theoretical background is reviewed, and it is shown how the kinetic energy of a system, initially at rest after a loading history, is likely to abruptly increase under the effect of disturbances. The vanishing of the second-order work thus constitutes a basic ingredient, related to both the pioneering work of Hill (J Mech Phys Solids (6):236–249, 1958) and the notion of bifurcation applied to geomechanics (Vardoulakis and Sulem in Bifurcation analysis in geomechanics, Chapman & Hall Publisher, London, 1995). Discrete numerical simulations were performed on homogeneous three-dimensional specimens, and the three basic conditions that must be satisfied in order to observe a failure mechanism are numerically checked. Finally, this work illustrates the phenomena that are likely to affect in situ slopes, for instance, when the loading (due to weather conditions or human activities) meets the three basic conditions for a failure mechanism to develop.     

Native and Biotechnologically Engineered Plant Proteases with Industrial Applications

Proteases occupy the most relevant position among industrial enzymes. Plant proteases have been used in medicine, detergent manufacturing, and food science for many years, but their production is diminishing in favor of those of microbial origin because lower production costs. Papain, bromelain, and ficin are the most frequently employed plant proteases, although new proteases with new and more appealing physicochemical properties for industry are still emerging. DNA technology and genetic engineering shall play, without a doubt, an important role for the production of these proteases at the industrial level. The present review focuses on the applications of traditional plant proteases as well as new proteases discovered during the last 20 years, some of which have already been genetically engineered either to increase production or to strengthen some of their physicochemical properties. The review also refers to the protease classification, action pattern, and main characteristics.     

Performance characterization of a small-capacity thermoacoustic cooler for air-conditioning applications

The performance of a working prototype, operated with and without water flow through the heat exchangers, was measured and found to be in reasonably close agreement to predictions from a simulation code, DELTAE, based on linear thermoacoustic theory. Further analysis and DELTAE simulations showed that the coefficient of performance may be significantly reduced when the stack temperature profile becomes non-linear, i.e. when the system is operated for a temperature span smaller than the optimal value for a given stack length. Guidelines to avoid this condition are provided.     

Parametric macromodeling based on amplitude and frequency scaled systems with guaranteed passivity

We propose a novel parametric macromodeling method for systems described by scattering parameters, which depend on multiple design variables such as geometrical layout or substrate features. It is able to build accurate multivariate macromodels that are stable and passive over the entire design space. Poles and residues are parameterized indirectly. The proposed method is based on an efficient and reliable combination of rational identification, a procedure to find amplitude and frequency scaling system coefficients and positive interpolation schemes. Pertinent numerical examples validate the proposed parametric macromodeling technique. Copyright © 2011 John Wiley & Sons, Ltd.