Nanocomposites of PBAT and cellulose nanocrystals modified by in situ polymerization and melt extrusion

Cellulose nanocrystals (CNC) were successfully grafted with a low molecular weight poly(butylene glutarate) through an in situ polymerization procedure. The grafting treatment decreased the CNC hydrophilic character and increased the onset of their thermal degradation by approximately 20°C, thus increasing the possibilities of CNC application. Composites of grafted and nongrafted CNC with a poly(butylene‐adipate‐co‐terephthalate) (PBAT) matrix were prepared by melt extrusion. The CNC addition led to an increase of 50% of the tensile elastic modulus of the PBAT. In addition, dynamic mechanical thermal analysis showed that the composite with CNC retained its high modulus even at temperatures far above the glass transition temperature of PBAT. At 60°C the storage modulus of the composite with CNC was approximately 200% higher than that of the pure PBAT. Thus, in this work, nanocomposites of improved properties were obtained through a combination of in situ polymerization and melt extrusion. POLYM. ENG. SCI., 56:1339–1348, 2016. © 2016 Society of Plastics Engineers     

Bioleaching of metal from waste stream using a native strain of Acidithiobacillus isolated from a coal mine drainage

In this study, the feasibility of using a biohydrometallurgical technique for selective metals recovery from electronic waste (e‐waste) by bacterial bioleaching was investigated. Acidithiobacillus was identified in coal mining acid mine drainage (AMD). The microorganism was studied using specific sequencing of a 16s rDNA fragment. The potential for the dissolution of copper from waste printed wire boards (PWBs) using the isolated Acidithiobacillus ferrooxidans (A. ferroxidans) was evaluated. The bioleaching experiments were performed in an orbital shaker at 30 °C and 170 rpm, with 10 % (v/v) inoculum and a pulp density of 30 g/L. The copper concentration was determined by energy dispersive x‐ray fluorescence (XRF). The result shows that copper recovery from PWBs using our A. ferrooxidans strain was 95 % after 8 days, which showed the feasibility of this process.     

Stability Is Not Everything: The Case of the Cyclisation of a Thrombin-Binding Aptamer

With the aim of developing a new approach to obtain improved aptamers, a cyclic thrombin-binding aptamer (TBA) analogue (cycTBA) has been prepared by exploiting a copper(I)-assisted azide–alkyne cycloaddition. The markedly increased serum resistance and exceptional thermal stability of the G-quadruplex versus TBA were associated with halved thrombin inhibition, which suggested that some flexibility in the TBA structure was necessary for protein recognition.     

Soybean Oil Fatty Acid Ester Estolides as Potential Plasticizers

Fatty acid ester estolides were synthesized from soybean oil and evaluated for plasticizer functionality in poly(vinyl chloride) (PVC). The plasticization ability of the fatty acid ester estolides depends upon the molecular features such as polarity, molecular weight, and branching. The structure of the fatty acid derivatives was modified at the ester head group with various alcohols and the estolide branch was created at the site of unsaturation. Soy fatty acid esters of methanol, iso-butanol, 2-ethylhexanol, and glycerol were prepared to vary the size and polarity at the ester head group. Estolides of these fatty acid esters were prepared using two synthetic routes. In the first route, the fatty acid ester was condensed with an aliphatic acid at the site of unsaturation in the presence of a strong mineral acid. In the second route, the fatty acid ester double bonds were converted to epoxy groups, which were ring opened and acetylated to form acetate estolides. The first synthetic route resulted in low-average estolide content per fatty acid chain while the second route resulted in a higher estolide content per fatty acid chain. The fatty acid ester estolides compounded with PVC showed good plasticizer properties as evidenced by the rheological properties and reduction in glass transition temperature. The fatty acid ester estolides with a higher estolide content had better plasticizer functionality, comparable to commercial controls.     

Remarkable change in the broadband electrical behavior of poly(vinylidene fluoride)–multiwalled carbon nanotube nanocomposites with the use of different processing routes

Poly(vinylidene fluoride) (PVDF) nanocomposites have plenty of applications in the electronic realm. In this study, we produced nanocomposites based on PVDF and multiwalled carbon nanotubes (MWCNTs), with various MWCNT loadings, using three different processing routes: solution mixing, melt mixing, and electrospinning. The broadband electrical behavior of these nanocomposites was studied and compared via impedance spectroscopy. The morphologies of the nanocomposites were characterized by transmission electron microscopy and scanning electron microscopy. The results reveal that the electrical behaviors of the samples were completely different according to the processing route used. Solution mixing was the most suitable method for producing nanocomposites with the highest conductivities, at low MWCNT loadings, whereas electrospinning was the most suitable method for producing nanocomposites with the lowest dielectric permittivity. These differences were attributed to the different arrangements of the MWCNTs caused by the different processes. Although the solution-mixed samples exhibited long and twisted MWCNTs, the melt-mixed samples had shorter MWCNTs, and the electrospun samples had MWCNTs embedded and aligned inside the insulating polymer nanofibers. Thus, these results project a vast horizon for tailoring the structure and thereby the broadband electrical behavior of PVDF–MWCNT nanocomposites for different types of applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47409.     

Thermal and viscoelastic behaviour of copolymers of propene and 1-hexene

Summary The thermal and viscoelastic behaviour of several copolymers of propene and 1-hexene have been studied in a wide range of compositions. The samples were prepared with a Ziegler-Natta catalyst with both internal and external donors. A significant amount of crystallinity has been found for the sample with a comonomer content as high as 19 mol %. The dynamic mechanical results show a considerable decrease of the storage modulus in the copolymers in relation to that of iPP. A single relaxation, corresponding to the glass transition, has been found in all the samples. Only the copolymer with the highest hexene content seems to display the beginning of another relaxation at low temperature.     

Polymer-Based Module for NAD+ Regeneration with Visible Light

The regeneration of enzymatic cofactors by cell-free synthetic modules is a key step towards producing a purely synthetic cell. Herein, we demonstrate the regeneration of the enzyme cofactor NAD⁺ by photo-oxidation of NADH under visible-light irradiation by using metal-free conjugated polymer nanoparticles. Encapsulation of the light-active nanoparticles in the lumen of polymeric vesicles produced a fully organic module able to regenerate NAD⁺ in an enzyme-free system. The polymer compartment conferred physical and chemical autonomy to the module, allowing the regeneration of NAD⁺ to occur efficiently, even in harsh chemical environments. Moreover, we show that regeneration of NAD⁺ by the photocatalyst nanoparticles can oxidize a model substrate, in conjunction with the enzyme glycerol dehydrogenase. To ensure the longevity of the enzyme, we immobilized it within a protective silica matrix; this yielded enzymatic silica nanoparticles with enhanced long-term performance and compatibility with the NAD⁺-regeneration system.     

Direct Radiation Effects on the Structure and Stability of Collagen and Other Proteins

In this review, recent progress in understanding the direct effects of radiation on the structure and stability of collagen, the most abundant protein in the human body, and other proteins is surveyed. Special emphasis is placed on the triple-helical structure of collagen, as studied by means of collagen mimetic peptides. The emerging patterns are the dose dependence of radiation processes and their abundance, the crucial role of radicals in covalent-bond formation (crosslinking) or cleavage, and the influence of the radiation energy and nature. Future research should allow fundamental questions, such as charge transfer and fragmentation dynamics triggered by ionization, to be answered, as well as developing applications such as protein-based biomaterials, notably with properties controlled by irradiation.