Bi-layer gelatin active films with “Pitanga” leaf hydroethanolic extract and/or natamycin in the second layer

Research on biopolymers-based active films produced with natural antioxidants and/or antimicrobials has gained attention over the last few years; however, anti-mold activity has been less studied than those of anti-bacteria. The aim of this work was the development and characterization of bi-layer films based on gelatin with natamycin and/or “Pitanga” leaf hydroethanolic extract in the second thin layer in order to determine the effects of these bioactive compounds on bi-layered film properties. The films were characterized regarding their moisture content and solubility in water, optical properties, microstructure, mechanical and thermal properties, water contact angle, water vapor permeability, UV/visible light transmission, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and antioxidant and anti-mold activities. Active films presented activity against Penicillium spp and Aspergillus niger and demonstrated antioxidant activity, as measured by ABTS ^•+ and DPPH ^• methods. Neither additive used in the films' second layer significantly affected the films' moisture content, thermal properties or the molecular interactions of the polymer matrix, assessed by FTIR, although some mechanical properties were affected, and the water contact angle. In conclusion, bi-layer films have reduced the quantity of additives required to maintain the antioxidant and anti-mold activities, as compared to similar monolayer films of the same thickness.     

Ferritic stainless steel welding with the A-TIG process

The main advantage of the TIG with flux process (A-TIG welding) is the possibility of obtaining greater penetration of the weld bead while employing the same welding parameters as conventional TIG welding. Various studies have shown the influence of active fluxes on the geometric characteristics of stainless steel austenitic welds. However, little is known about the influence of this process on the geometric and metallurgical characteristics of the weld beads in ferritic stainless steels. In this work, different types of flux are applied when welding ferritic stainless steel with the objective of verifying possible influences on the weld bead's profile, on its visual appearance, on the microstructure, on the hardness of the welded zone and on the impact resistance (Charpy test). The bead-on-plate welds were produced without using any addition metal. Six types of flux were used – one being an oxide produced in a laboratory (TiO₂) and five commercial fluxes. The results showed that use of the flux allows an increase in penetration with significant changes in the appearance of the weld bead. It was also confirmed that the microstructure and the hardness of the weld bead for the steel studied were not affected by the type of flux used, with the microstructure analysed under an optical microscope. The steel in the study showed a high degree of fragility at ambient temperature.     

Sex-Related Differences in Murine Models of Chemically Induced Pulmonary Fibrosis

We developed two models of chemically induced chronic lung injury and pulmonary fibrosis in mice (intratracheally administered hydrochloric acid (HCl) and intratracheally administered nitrogen mustard (NM)) and investigated male–female differences. Female mice exhibited higher 30-day survival and less weight loss than male mice. Thirty days after the instillation of either HCl or NM, bronchoalveolar lavage fluid displayed a persistent, mild inflammatory response, but with higher white blood cell numbers and total protein content in males vs. females. Furthermore, females exhibited less collagen deposition, milder pulmonary fibrosis, and lower Ashcroft scores. After instillation of either HCl or NM, all animals displayed increased values of phosphorylated (activated) Heat Shock Protein 90, which plays a crucial role in the alveolar wound-healing processes; however, females presented lower activation of both transforming growth factor-β (TGF-β) signaling pathways: ERK and SMAD. We propose that female mice are protected from chronic complications of a single exposure to either HCl or NM through a lesser activation of TGF-β and downstream signaling. The understanding of the molecular mechanisms that confer a protective effect in females could help develop new, gender-specific therapeutics for IPF.     

Cathodic protection monitoring of buried carbon steel pipeline: measurement and interpretation of instant-off potential

The criterion used to verify the cathodic protection condition of a structure is based on structure-to-electrolyte potential measurement, which can include an ohmic drop contribution. Among the available techniques, the use of potential probes with internal reference electrode and of corrosion coupons with a so-called soil-access tube represents the most appropriate way to measure the IR-free potential, eliminating the ohmic drop contribution. An alternative is represented by on-off technique if equalising, galvanic or stray currents are not present. Laboratory tests have been carried out in soil-simulating solution on cathodically protected carbon steel in order to evaluate the effectiveness of off-potential for the assessment of cathodic protection. Instant-off potential is not reliable in overprotection condition; moreover, the accuracy of the measurement is strongly influenced by the presence of external current as galvanic or equalising currents. The effect of low-pass filter in the data acquisition system on the potential reading is discussed.     

Effects of extrusion processing on nutrients in dry pet food

Extrusion cooking is commonly used to produce dry pet foods. As a process involving heat treatment, extrusion cooking can have both beneficial and detrimental effects on the nutritional quality of the product. Desirable effects of extrusion comprise increase in palatability, destruction of undesirable nutritionally active factors and improvement in digestibility and utilisation of proteins and starch. Undesirable effects of extrusion include reduction of protein quality due to e.g. the Maillard reaction, decrease in palatability and loss of heat‐labile vitamins. Effects of extrusion processing on the nutritional values of feeds for livestock have been well documented. Literature results concerning effects of extrusion on dry pet foods, however, are scarce. The present review discusses the results of studies investigating the impact of extrusion cooking on the nutritional quality of dry pet foods. Copyright © 2008 Society of Chemical Industry     

Inactivation of Oxidative Enzymes by High-Intensity Pulsed Electric Field for Retention of Color in Carrot Juice

The effects of high-intensity pulsed electric fields (HIPEF) on oxidative enzymes and color of fresh carrot juice were studied. A response surface methodology (RSM) was used to evaluate the effect of pulse polarity (mono or bipolar mode), pulse width (from 1 to 7 μs), and pulse frequency (from 50 to 250 Hz) on color and peroxidase (POD) inactivation of carrot juice treated by HIPEF. The total treatment time and the electric field strength were set at 1,000 μs and 35 kV/cm, respectively, at a temperature below 35°C. The physicochemical characteristics of carrot juice were measured. There was a linear relationship between electrical conductivity and temperature of the carrot juice. The results showed that HIPEF-treated carrot juice at 35 kV/cm for 1,000 μs applying 6 μs pulse width at 200 Hz in bipolar mode led to 73.0% inactivation of POD. The color coordinates did not change significantly. Therefore, HIPEF was effective in POD inactivation and carrot juice color preservation.     

Multivariate data analysis of some xenobiotic trace metals in mussels from the Gulf of Trieste

Summary The concentration of Cd, Hg and Pb in the soft part of mussels has been studied by means of bi-and multi-variate statistical approaches. In particular, the principal component analysis has been applied to study the association among these toxic metals in mussels sampled from the gulf of Trieste, which is a critical area as far as mercury pollution is concerned.

---

Mehrdimensionale Analyse der Daten einiger xenobiotischer Spurenmetalle in Miesmuscheln aus dem Golf von Triest

Zusammenfassung Der Gehalt von Cd, Hg und Pb in Miesmuschelfleisch wurde nach einer statistischen mehrdimensionalen Analyse untersucht. Besonders wurde die Hauptkomponentenanalyse zum Studium der Assoziationen dieser toxischen Metalle in Miesmuscheln angewandt. Die Miesmuschelproben stammten aus dem Golf von Triest, ein kritisches Gebiet für Quecksilberverunreinigungen.

     

Principal component analysis as a tool for studying interdependences among trace metals in edible mussels from the gulf of Trieste

Summary Principal component analysis has been applied to analyze the correlation matrix obtained from a (6 × 44) data matrix. The 6 trace metals are Co, Ni, Cu, Cd, Hg, and Pb, which are contained in the soft part of edible mussels (Mytilus galloprovincialis Lamarck) from a hatchery on the gulf of Trieste. In the space of eigenvectors, the dimensions are reduced to 3 principal axes, which account for about 77% of the total variance.The unrotated factor matrix obtained by the principal components shows that Co, Ni and Cu are bonded to the first principal component, Cd and Pb to the second, Hg to the third. This picture is also assessed by the Varimax-rotated matrix and it is tentatively explained, at least in part, by considering the associations of the trace metals from various geographical sources.

---

Hauptkomponentenanalyse für das Studium der Assoziationen unter Spurenmetallen in Miesmuscheln im Golf von Triest

Zusammenfassung Die Hauptkomponentenanalyse wurde auf die Korrelationsmatrix, die aus der (6 × 44) Datenmatrix hervorgeht, angewandt. Die 6 Spurenmetalle sind Co, Ni, Cu, Cd, Hg, Pb, die im Miesmuschelnfleisch (Mytilus galloprovineialis Lamarck) gefunden werden. Die Miesmuschelnproben stammen aus der Zucht des Golfes von Triest. In dem Eigenvektorraum werden die Dimensionen auf drei Hauptachsen reduziert, die ungefähr 77% der totalen Varianz erklären.Die unrotierte Faktorenmatrix, die aus den Hauptkomponenten hervorgeht, zeigt, daß Co, Ni, Cu an die erste Hauptkomponente, Cd und Pb an die zweite, Hg an die dritte gebunden sind. Dieses Bild wird von der Varimax-rotierten Matrix bestätigt und es findet eine Erklärung in der Herkunft der Spurenmetalle.

     

Mortar composition defined according to rheometer and flow table tests using factorial designed experiments

This paper reports the effects of distinct contents of silica fume (SF), superplasticizer (SP) and water/binder ratio (W/B) in mortars. Samples with SF (0–10 wt%), SP (1.0–1.2 wt%) and W/B ratio (0.30–0.35) were produced. Flow table test and rheometry were used as parameters to formulate mortars by means of a factorial design experiment. Setting time, water absorption, apparent porosity and compressive strength of mortars at 28 days were also determined. Mortar formulations with lower fluidity are restricting when a rheometer was used. For higher torques, adjustments with the regressive equation of the Bingham model are less accurate, since the flow behavior is less constant. On the other hand, mortars with higher fluidity it is limited by spread test. The spread value on flow table test is more related to yield stress than to plastic viscosity. The design experiments identified the main factors (SF, SP and W/B) and their interactions for all properties on the fresh and hardened state, showing that experimental design with multiple regression equations is an appropriate tool to be applied in this case. Water content was the controlling parameter for practically all properties studied.     

An algorithm for the recognition of levels of congestion in road traffic problems

Detection and recognition of the level of congestion at an intersection is a very important problem and a valuable source of information in traffic management. Although it is just one of all the aspects that make up a traffic management system, it seems to be a crucial point for gathering information. In this paper, we present a technique based on a k-means clustering algorithm for classification, which has been already successfully used in a number of pattern recognition problems, namely: as an algorithm for face recognition problems and in a number of medical diagnosis problems and it compares very well with the state of the art techniques.