HDPE/LLDPE reactor blends with bimodal microstructures—Part II: rheological properties

Reactor blends of polyethylene/poly(ethylene-co-1-octene) resins with bimodal molecular weight and bimodal short chain branching distributions were synthesized in a two-step polymerization process. The compositions of these blends range from low molecular weight (LMW) homopolymer to high molecular weight (HMW) copolymer and vice versa HMW homopolymer to LMW copolymer. The shear flow characteristics of these polymers in the typical processing range mostly depend on the molecular weight and MWD of the polymer and are independent of the short chain branch content. From oscillatory shear measurements, it was observed that the viscosity of HMW polymers was reduced with the addition of LMW material. For the polymers produced with this two-step polymerization process, the LMW homopolymer and HMW copolymer blends and HMW homopolymer and LMW copolymer blends were melt miscible, despite the large viscosity differences of the pure components.     

FMAP: Distributed cooperative multi-agent planning

This paper proposes FMAP (Forward Multi-Agent Planning), a fully-distributed multi-agent planning method that integrates planning and coordination. Although FMAP is specifically aimed at solving problems that require cooperation among agents, the flexibility of the domain-independent planning model allows FMAP to tackle multi-agent planning tasks of any type. In FMAP, agents jointly explore the plan space by building up refinement plans through a complete and flexible forward-chaining partial-order planner. The search is guided by h _{D T G} , a novel heuristic function that is based on the concepts of Domain Transition Graph and frontier state and is optimized to evaluate plans in distributed environments. Agents in FMAP apply an advanced privacy model that allows them to adequately keep private information while communicating only the data of the refinement plans that is relevant to each of the participating agents. Experimental results show that FMAP is a general-purpose approach that efficiently solves tightly-coupled domains that have specialized agents and cooperative goals as well as loosely-coupled problems. Specifically, the empirical evaluation shows that FMAP outperforms current MAP systems at solving complex planning tasks that are adapted from the International Planning Competition benchmarks.     

Polymerization by phase transfer catalysis

Poly(amide-carbonate)s and poly(amide-thiocarbonate)s derived from the diphenol-amides N-(2,6-dichloro-4-nitrophenyl)-2,2-bis(hydroxyphenyl)-propylamide (I), N-(2,6-dichloro-4-nitrophenyl)-3,3-bis(hydroxyphenyl)-butylamide (II), and N-(2,6-dichloro-4-nitrophenyl)-4,4-bis(hydroxyphenyl)-pentylamide (III), and phosgene or thiophosgene, have been synthesized under phase transfer conditions using several quaternary ammonium salts as phase transfer catalysts. Benzyltriethylammonium chloride (BTEAC) was effective in practically all cases due the hydrophilicity of this catalysts. Received: 21 February 1997/Revised: 28 April 1997/Accepted: 30 April 1997     

Dissecting the protocol and network traffic of the OnLive cloud gaming platform

Cloud gaming is a new paradigm that is envisaged to play a pivotal role in the video game industry in forthcoming years. Cloud gaming, or gaming on demand, is a type of online gaming that allows on-demand streaming of game content onto non-specialised devices (e.g. PC, smart TV, etc.). This approach requires no downloads or game installation because the actual game is executed on the game company’s server and is streamed directly to the client. Nonetheless, this revolutionary approach significantly affects the network load generated by online games. As cloud gaming presents new challenges for both network engineers and the research community, both groups need to be fully conversant with these new cloud gaming platforms. The purpose of this paper is to investigate OnLive, one of the most popular cloud gaming platforms. Our key contributions are: (a) a review of the state-of-the-art of cloud gaming; (b) reverse engineering of the OnLive protocol; and (c) a synthetic traffic model for OnLive.     

Volatile Emissions Triggered by Multiple Herbivore Damage: Beet Armyworm and Whitefly Feeding on Cotton Plants

Plants are commonly attacked by more than one species of herbivore, potentially causing the induction of multiple, and possibly competing, plant defense systems. In the present paper, we determined the interaction between feeding by the phloem feeder silverleaf whitefly (SWF), Bemisia tabaci Gennadius (B-biotype = B. argentifolii Bellows and Perring), and the leaf-chewing beet armyworm (BAW), Spodoptera exigua Hübner, with regard to the induction of volatile compounds from cotton plants. Compared to undamaged control plants, infestation with SWF did not induce volatile emissions or affect the number and density of pigment glands that store volatile and nonvolatile terpenoid compounds, whereas infestation by BAW strongly induced plant volatile emission. When challenged by the two insect herbivores simultaneously, volatile emission was significantly less than for plants infested with only BAW. Our results suggest that tritrophic level interactions between cotton, BAW, and natural enemies of BAW, that are known to be mediated by plant volatile emissions, may be perturbed by simultaneous infestation by SWF. Possible mechanisms by which the presence of whiteflies may attenuate volatile emissions from caterpillar-damaged cotton plants are discussed.     

Comparative study of the physical aging of the epoxy systems BADGE n = 0/m‐XDA and BADGE n = 0/m‐XDA/PEI

The physical aging of the epoxy network consisting of a diglycidyl ether of bisphenol A, m‐xylylenediamine, and polyetherimide was studied by differential scanning calorimetry. The glass transition temperature and the variation of the specific heat capacities have been calculated using the method, based on the intersection of both enthalpy–temperature lines for glassy and liquid states. The apparent activation energy (E_H) was calculated using a single method that involved separate temperature and excess enthalpy dependency. All calorimetric data were compared with those obtained for the epoxy network without thermoplastic. thermoplastic. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3931–3935, 2006     

Separation of Triacylglycerol Species from Interesterified Oils by High-Performance Liquid Chromatography

Using a 1,3-regioselective lipase as a catalyst, soybean oil and olive oil were interesterified with the short-chain triacylglycerol tributyrin (1,2,3-tributyrylglycerol) to produce mixtures of structured triacylglycerols (SL-TAG). The SL-TAG were purified by column chromatography and analyzed by both normal-phase (silica column; NP_SIL) and reversed-phase [octadecyl silane (ODS) column] high-performance liquid chromatography (HPLC). Individual SL-TAG molecular species were detected by evaporative light-scattering detection, and characterized by mass spectrometry. NP_SIL HPLC successfully separated the newly synthesized SL-TAG into two groups of TAG: one composed of one butyryl group and two long-chain fatty acyl groups (from soybean or olive oil); the second was composed of two butyryl groups and one long-chain fatty acyl group. The SL-TAG species were further analyzed by reversed-phase HPLC which gave a more detailed separation of the TAG species present in the two SL-TAG.     

Zeolite‐catalyzed isomerization of oleic acid to branched‐chain isomers

Branched‐chain (bc) saturated fatty acids (SFA) have potential as oleochemical intermediates since they have better oxidative stability than linear unsaturated fatty acids (UFA) and have better low‐temperature properties than linear SFA. Previous studies in converting UFA to bc‐FA using clay catalysts have resulted in only modest yields and conversions. Recent reports, however, have suggested that certain zeolites can be effective catalysts for converting UFA to bc‐FA in higher yields and conversions. In this work, we examined the scope and potential of the zeolite‐catalyzed synthesis of bc‐FA starting from readily available monounsaturated linear FA. Our results show that common UFA such as oleic acid can be converted to bc‐isomers using modified Ferrierite zeolite catalysts with high conversions (98%) and high selectivity (85%) and that the zeolite catalysts are reusable for at least three cycles. The positions of branching (methyl) on the FA chain were determined from the GC‐MS spectra of the picolinyl esters of the bc‐FA.     

Synthesis of hyperbranched P poly(glycerol-diacid) oligomers

Novel oligomeric prepolymers were synthesized by acid-catalyzed condensation of glycerol with iminodiacetic, azelaic, or succinic acid. The prepolymers were obtained, on average, in 62% yield and were characterized by ¹³C NMR, ¹H NMR, matrix-assisted laser desorption ionization-time of flight-mass spectrometry, and gel permeation chromatography. The synthesized oligomers had an average M.W. of 1543 Daltons (average polydispersity (PD)=1.34, average degree of polymerization (DOP)=5.5). Hyperbranching was evident in the oligomers produced when using azelaic acid and succinic acid as co-monomers with glycerol, whereas the reaction between iminodiacetic acid and glycerol resulted in linear products bearing cyclic urethane structures.