Eicosapentaenoic acid (20∶5n-3) from the marine microalgaPhaeodactylum tricornutum

Eicosapentaenoic acid (EPA, 20∶5n-3) was obtained from the marine microalgaePhaeodactylum tricornutum by a three-step process: fatty acid extraction by direct saponification of biomass, polyunsaturated fatty acid (PUFA) concentration by formation of urea inclusion compounds, and EPA isolation by semipreparative high-performance liquid chromatography (HPLC). Alternatively, EPA was obtained by a similar two-step process without the PUFA concentration step by the urea method. Direct saponification of biomass was carried out with two solvents that contained KOH for lipid saponification. An increase in yield was obtained because the problems associated with emulsion formation were avoided by separating the biomass from the soap solution before adding hexane for extraction of insaponifiables. The most efficient solvent, ethanol (96%) at 60°C for 1 h, extracted 98.3% of EPA. PUFA were concentrated by the urea method with a urea/fatty acid ratio of 4∶1 at a crystallization temperature of 28°C and by using methanol and ethanol as urea solvents. An EPA concentration ratio of 1.73 (55.2∶31.9) and a recover yield of 78.6% were obtained with methanol as the urea solvent. This PUFA concentrate was used to obtain 93.4% pure EPA by semipreparative HPLC with a reverse-phase, C₁₈, 10 mm i.d.×25-cm column and methanol/water (1% acetic acid), 80∶20 w/w, as the mobile phase. Eighty-five percent of EPA loaded was recovered, and 65.7% of EPA present inP. tricornutum biomass was recovered in highly pure form by this three-step downstream process. Alternatively, 93.6% pure EPA was isolated from the fatty acid extract (without the PUFA concentration step) with 100% EPA recovery yield. This two-step process increases the overall EPA yield to 98.3%, but it is only possible to obtain 20% as much EPA as that obtained by three-step downstream processing.     

Effects of allelochemicals on plant respiration and oxygen isotope fractionation by the alternative oxidase

The goal of this investigation was to determine the effects of allelochemicals on plant respiration that thereby may be responsible for their role in growth inhibition. We have tested the effects of juglone, quercetin, cinnamic acid, and-pinene on respiration rates, and electron partitioning through the cytochrome and alternative respiratory pathways, by measuring on-line oxygen consumption and oxygen isotope fractionation in soybean cotyledon tissue. Cinnamic acid and-pinene decreased the oxygen consumption rate and increased the relative partitioning of electron transport to the alternative pathway. Possible biochemical mechanisms of these effects are discussed.     

Silica Gel- and MCM-41-Supported MoS2 Catalysts for HDS Reactions

MCM-41- and silica gel-supported MoS₂ catalysts were prepared. MCM-41 was synthesized and impregnated with precursor, then activated to obtain the active phase. The sol–gel method was used for providing the SiO₂ support as well as for including the catalyst precursors in one single step of preparation. Such catalysts have applications particularly in hydrodesulfurization (HDS) and hydrodenitrogenation (HDN) processes. A comparison of the activities of the catalysts was made. The catalytic activity results showed the method of preparation used in this study was successful in producing very efficient catalysts for the HDS of dibenzothiophene (DBT).A higher selectivity for direct C–S bond cleavage was observed for the MoS₂ catalyst supported on SiO₂ by the sol–gel method. X-ray diffraction studies showed that the catalysts were poorly crystallized with a very weak intensity of the (002) line of 2H-MoS₂.     

HDPE/LLDPE reactor blends with bimodal microstructures—part I: mechanical properties

Reactor blends of polyethylene/poly(ethylene-co-1-octene) resins with bimodal molecular weight and bimodal short chain branching distributions were synthesized in a two-step polymerization process. The compositions of these blends range from low molecular weight (LMW) homopolymer to high molecular weight (HMW) copolymer and, vice versa, HMW homopolymer to LMW copolymer. The physical properties of the blends were found to be consistent with the nature of the individual components. For the tensile properties, the stiffness decreases with increasing the fraction of the copolymer, regardless of the molecular weight of the homopolymer fraction. For these blends with bimodal microstructures, it was confirmed that the degree of crystallinity governs the stiffness of the polymer. However, the energy dampening properties of the polymers benefit from the presence of the copolymer. A balance of stiffness and toughness can be obtained by altering the composition of the blends. For some blends, the presence of HMW homopolymer can dominate the tensile properties, showing little variation in the stiffness with increased addition of copolymer. It was also demonstrated that the testing conditions and thermal treatment of the polymer greatly influence the resulting elastic and energy dampening properties. Depending on the desired application, annealing these polymers (especially very low density copolymers) not only increases the crystallinity and stiffness, but also changes the frequency response of the dynamic mechanical properties.     

Al ionic radius influence on molecular dynamics simulations ofγ-Al2O3

Molecular dynamics (MD) simulations of-Al₂O₃, using a pairwise additive interaction potential of Pauling's type with four different radii for aluminum atoms, were analysed in order to determine the influence of the radius on the modification of coordination numbers of A1 relative to the ideal structure, at two different temperatures of 300 and 1500 K. It is found that the best choice is the radius of penta-coordinated aluminum, reproducing structural and vibrational properties of the compound in excellent agreement with experimentally observed properties.     

Margarines: A rheological study

Time-dependent flow properties of both commercial and pilot plant-made margarines were characterized under steady shear. Flow curves were fitted to the kinetic expression τ = τ _i +a e ^−k1t +b e ^−k2t . A first-order kinetic model did not describe the observed destruction process of the margarine structure in an adequate manner. In the proposed model, two structures with different destruction rates are postulated. Each structure contributes to a part of the shear stress necessary to deform the margarine sample. The parameters τ _i a andb are temperature-dependent. Decreasing temperatures produce an exponential increase of τ _i , a linear increase ofb and an increase ofa up to a point beyond which it remains constant. A physical interpretation of the model is proposed. The role of the aqueous phase was also studied. Greater hardness was detected at higher water content. Parameter τ _i increased, at any selected temperature, with increasing aqueous phase content of the sample. Parametera increased with decreasing temperatures and higher water content. On the other hand, parameterb was not affected by the amount of aqueous phase. This kinetic model could be employed to perform studies on the influence of different parameters of margarine formulation on its rheologic behavior.     

A new combined computational and NMR-spectroscopical strategy for the identification of additional conformational constraints of the bound ligand in an aprotic solvent

This study documents the feasibility of switching to an aprotic medium in sugar receptor research. The solvent change offers additional insights into mechanistic details of receptor--carbohydrate ligand interactions. If a receptor retained binding capacity in an aprotic medium, solvent-exchangeable protons of the ligand would not undergo transfer and could act as additional sensors, thus improving the level of reliability in conformational analysis. To probe this possibility, we first focused on hevein, the smallest lectin found in nature. The NMR-spectroscopic measurements verified complexation, albeit with progressively reduced affinity by more than 1.5 orders of magnitude, in mixtures of up to 50% dimethyl sulfoxide (DMSO). Since hevein lacks the compact beta-strand arrangement of other sugar receptors, such a structural motif may confer enhanced resistance to solvent exchange. Two settings of solid-phase activity assays proved this assumption for three types of alpha- and/or beta-galactoside-binding proteins, that is, a human immunoglobulin G (IgG) subfraction, the mistletoe lectin, and a member of the galectin family of animal lectins. Computer-assisted calculations and NMR experiments also revealed no conspicuous impact of the solvent on the conformational properties of the tested ligands. To define all possible nuclear Overhauser effect (NOE) contacts in a certain conformation and to predict involvement of exchangeable protons, we established a new screening protocol applicable during a given molecular dynamics (MD) trajectory and calculated population densities of distinct contacts. Experimentally, transferred NOE (tr-NOE) experiments with IgG molecules and the disaccharide Gal'alpha1-3Galbeta1-R in DMSO as solvent disclosed that such an additional crosspeak, that is, Gal'OH2--GalOH4, was even detectable for the bound ligand under conditions in which spin diffusion effects are suppressed. Further measurements with the plant lectin and galectins confirmed line broadening of ligand signals and gave access to characteristic crosspeaks in the aprotic solvent and its mixtures with water. Our combined biochemical, computational, and NMR-spectroscopical strategy is expected to contribute notably to the precise elucidation of the geometry of ligands bound to compactly folded sugar receptors and of the role of water molecules in protein--ligand (carbohydrate) recognition, with relevance to areas beyond the glycosciences.     

HumanTop: a multi-object tracking tabletop

In this paper, a computer vision based interactive multi-touch tabletop system called HumanTop is introduced. HumanTop implements a stereo camera vision subsystem which allows not only an accurate fingertip tracking algorithm but also a precise touch-over-the-working surface detection method. Based on a pair of visible spectra cameras, a novel synchronization circuit makes the camera caption and the image projection independent from each other, providing the minimum basis for the development of computer vision analysis based on visible spectrum cameras without any interference coming from the projector. The assembly of both cameras and the synchronization circuit is not only capable of performing an ad-hoc version of a depth camera, but it also introduces the recognition and tracking of textured planar objects, even when contents are projected over them. On the other hand HumanTop supports the tracking of sheets of paper and ID-code markers. This set of features makes the HumanTop a comprehensive, intuitive and versatile augmented tabletop that provides multitouch interaction with projective augmented reality on any flat surface. As an example to exploit all the capabilities of HumanTop, an educational application has been developed using an augmented book as a launcher to different didactic contents. A pilot study in which 28 fifth graders participated is presented. Results about efficiency, usability/satisfaction and motivation are provided. These results suggest that HumanTop is an interesting platform for the development of educational contents.     

Enantiospecific synthesis of (R)-1,7-dioxaspiro [5.5]undecane [major component of olive fruit fly (Dacus Oleae) sex pheromone] from d-Fructose

The synthesis of the title compound13 has been carried out through the preparation of its precursor, (3R,4R,5S,6R)-3,4,5-trihydroxy-1,7-dioxaspiro[5.5]undecane (6), obtained fromd-fructose using Wittig's methodology, reduction, and spiroketalation. Compound6 was transformed into13 by a Barton deoxygenation at C-5 followed by a Corey dideoxygenation at C-3,4 of the appropriately protected derivatives.Enantiospecific synthesis of spiroacetals. Part II. For Part I, see Izquierdo and Plaza (1990).     

Modified Indigo Method For Gaseous And Aqueous Ozone Analyses

The indigo method developed by Bader and Hoigné for aqueous ozone analysis was modified to allow for both gaseous and aqueous ozone determination. Gas or water samples were extracted with a gas-tight syringe containing a known volume of indigo reagent. The modified procedure provided a more consistent basis for gaseous and aqueous ozone determination allowing for more accurate ozone mass balance calculations. Direct gaseous ozone UV absorbance with molar absorptivity of 3,000 M^?1cm^?1 at 258 nm was used as primary standard to determine the molar absorptivity of the indigo reagent. The molar absorptivity of indigo reagent, assuming a 1:1 stoichiometric ratio for the reaction between indigo and ozone, was determined to be 23,150 ± 80 M^?1cm^?1, or approximately 16 percent higher than that of 20,000 M^?1cm^?1 suggested by Bader and Hoigné. An independently calibrated membrane-electrode ozone monitor showed good correlation with indigo method results using the molar absorptivity value determined in this study. The apparent molar absorptivity of aqueous ozone at the wavelength of 258 nm measured by the modified indigo method increased from 2,400 to 3,600 M^?1cm^?1 in the investigated ozone concentration range of 0.4 to 11.0 mg/L. This variation might have been caused by the inherent interference of unidentified ozone byproducts, which presence was supported with scanning spectra in the wavelength range of 200 to 300 nm.