Copper(I/II), α/β‐Synuclein and Amyloid‐β: Menage à Trois?

Copper binding to α‐synuclein (aS) and to amyloid‐β (Ab) has been connected to Parkinson's and Alzheimer's disease (AD), respectively, because Cu ions can modulate the peptide aggregation, and these Cu ? peptide complexes can catalyse the production of reactive oxygen species (ROS). In a significant proportion of AD brains, aggregation of aS and Ab has been detected, and it was proposed that Ab and aS interact with each other. Thus, we investigated the potential interactions of Ab and aS through their binding of copper(I) and copper(II). Additionally, β‐synuclein (bS) was investigated, due to its additional methionine residue, a potential Cu^I ligand. We found that: 1) the peptides containing the Cu‐binding domains Ab1–16, aS1–15 and bS1–15 have similar affinities towards Cu^II and towards Cu^I, with Ab1–16 being slightly stronger, 2) in the case of Cu^I, the additional Met residue in bS1–15 increased the affinity slightly, 3) the exchange of Cu^I/II between the two peptides is rapid (≤ms), 4) a/bS1–15 and Ab1–16 form a heterodimeric complex with Cu^II, 5) Cu^I probably promotes a transient ternary complex, 6) the different Cu^I/II coordination of Ab1–16, aS1–15 and bS1–15 impacts the capacity to produce ROS and to oxidise catechol, and 7) when Ab1–16, aS1–15 and Cu are present, the ROS production more closely resembles that by Ab1–16. The work gives insights into the coordination chemistry of these related peptides, and the relevance of coordination differences, the ternary complex and ROS production are discussed.     

Capillary extrusion behavior of phenolphthalein poly(ether-ether-sulphone) (PES-C)

The capillary extrusion flow properties of novel engineering thermoplastic phenolphthalein poly(ether-ether-sulphone) (PES-C) have been investigated using capillary rheometer. The dependence of viscosity on the wall shear rate and temperatures were obtained. The flow activation energy was found to decrease with shear rate but to be constant with shear stress. The entrance effect was calculated and from which the extensional behavior was estimated using Cogswell's method. From the extrudate swell ratio the principal normal stress was evaluated and a temperature-independent correlation was observed when they were plotted against shear stress. The melt fracture phenomena were checked and discussed also. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65:951–958, 1997     

Evaluation of Antioxidant,Antidiabetic and Anticholinesterase Activities of Smallanthus sonchifolius Landraces and Correlation with Their Phytochemical Profiles

The present study aimed to investigate the phytochemical profile of leaf methanol extracts of fourteen Smallanthus sonchifolius (yacon) landraces and their antioxidant, anticholinesterase and antidiabetic activities that could lead to the finding of more effective agents for the treatment and management of Alzheimer’s disease and diabetes. For this purpose, antioxidant activity was assessed using different tests: ferric reducing ability power (FRAP), 2,2-diphenyl-1-picryl hydrazyl (DPPH), nitric oxide (˙NO) and superoxide (O₂˙⁻) scavenging and lipid peroxidation inhibition assays. Anticholinesterase activity was investigated by quantifying the acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) inhibitory activities, whereas antidiabetic activity was investigated by α-amylase and α-glucosidase inhibition tests. To understand the contribution of metabolites, phytochemical screening was also performed by high performance liquid chromatography-diode array detector (HPLC-DAD) system. Among all, methanol extract of PER09, PER04 and ECU44 landraces exhibited the highest relative antioxidant capacity index (RACI). ECU44 was found to be rich in 4,5-di-O-caffeoylquinic acid (CQA) and 3,5-di-O-CQA and displayed a good α-amylase and α-glucosidase inhibition, showing the lowest IC₅₀ values. Flavonoids, instead, seem to be involved in the AChE and BChE inhibition. The results of this study revealed that the bioactive compound content differences could be determinant for the medicinal properties of this plant especially for antioxidant and antidiabetic activities.     

Alanine Scan of the Peptide Antibiotic Feglymycin: Assessment of Amino Acid Side Chains Contributing to Antimicrobial Activity

The antibiotic feglymycin is a linear 13‐mer peptide synthesized by the bacterium Streptomyces sp. DSM 11171. It mainly consists of the nonproteinogenic amino acids 4‐hydroxyphenylglycine and 3,5‐dihydroxyphenylglycine. An alanine scan of feglymycin was performed by solution‐phase peptide synthesis in order to assess the significance of individual amino acid side chains for biological activity. Hence, 13 peptides were synthesized from di‐ and tripeptide building blocks, and subsequently tested for antibacterial activity against Staphylococcus aureus strains. Furthermore we tested the inhibition of peptidoglycan biosynthesis enzymes MurA and MurC, which are inhibited by feglymycin. Whereas the antibacterial activity is significantly based on the three amino acids D ‐Hpg1, L ‐Hpg5, and L ‐Phe12, the inhibitory activity against MurA and MurC depends mainly on L ‐Asp13. The difference in the position dependence for antibacterial activity and enzyme inhibition suggests multiple molecular targets in the modes of action of feglymycin.     

Butyltin(IV) Benzoates: Inhibition of Thioredoxin Reductase,Tumor Cell Growth Inhibition,and Interactions with Proteins

Thioredoxin reductase (TrxR) is overexpressed in cancer cells and is therefore a putative cancer target. Inhibition of this enzyme is considered an important strategy for the development of new chemotherapeutic agents with a specific mechanism of action. Organotin compounds have been described as experimental antitumor agents, yet their mechanism of action remains largely unknown. Based on the outcome of a virtual screening study, various di‐ and tri‐n‐butyltin(IV) carboxylates were synthesized, and their biological properties were evaluated. All synthesized compounds were able to inhibit TrxR selectively within the micromolar range and showed potent antitumor activity against HT‐29 and MCF‐7 cancer cell lines. Moreover, tin(IV) organometallics were found to strongly induce apoptosis in the BJAB lymphoma cell line. Mass spectrometry and atomic absorption spectroscopy experiments revealed metal binding to proteins, and efficient cellular uptake was observed using a di‐n‐butyltin(IV) complex as an example.     

Hybrid MCM-41 grafted by a general microwave-assisted procedure: a characterization study

Hybrid materials obtained through a Microwave-assisted grafting of organic functional groups on mesoporous silica (MCM-41 type) have been characterized by X-ray powder diffraction, TG-DSC, N₂ adsorption, solid state ¹³C- and ²⁹Si-NMR, TEM and SEM. The studied grafting procedure is effective in the preparation of hybrid organosilicas under solvent-free conditions. Microwaves allows an ultra-fast and clean functionalization of the mesoporous materials and the method has been applied to produce a wide series of functional materials. The hybrid materials maintain the original mesoporous structure when the loading of linked organic groups does not exceed 10 %. In this cases, the slight pore volume reduction is linearly correlated to the organic amount in the product. If functional groups able to interact among them through hydrogen bond are used, hybrid materials exhibit high Organic/SiO₂ ratios and low pore volumes due to the formation of a network occluding the pores, where functional groups of free organosilane molecules interacts with the functional groups of molecules linked to the matrix. NMR data confirm that the network is composed by organosilane molecules linked or not to the framework. Acid washing is able to labilize hydrogen bond and open the network. In the case of bulky but chemically inert functionalising agents the network is not produced.     

The influence of the preparing conditions of SiO2 supported Cp2ZrCl2 catalyst on ethylene polymerization

In this work, ethylene was polymerized by using Cp₂ZrCl₂ supported on silica pretreated with methylaluminoxane (MAO) as the catalyst system. The influence of the conditions for the preparation of the heterogeneous catalyst, such as temperature, washing method of the catalytic solid, MAO and metallocene concentration in the support treatment, time of MAO, and metallocene immobilization on the support, type of alkylaluminum used in the support pretreatment, and calcination temperature of the support were investigated. Aluminum and zirconium content fixed on the silica surface were determined by inductively coupled plasma emission spectroscopy. Polymer characteristics were determined by gel permeation chromatography and differential scanning calorimetry. According to the results, the activity of some supported catalysts were far higher than with the homogeneous system. Moreover, polyethylene with very high molecular weights were also obtained and with molecular weight distribution larger than those produced with the homogeneous precursor. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2054–2061, 2002     

β-Cyclodextrin Inclusion Complex to Improve Physicochemical Properties of Pipemidic Acid: Characterization and Bioactivity Evaluation

The aptitude of cyclodextrins (CDs) to form host-guest complexes has prompted an increase in the development of new drug formulations. In this study, the inclusion complexes of pipemidic acid (HPPA), a therapeutic agent for urinary tract infections, with native β-CD were prepared in solid state by kneading method and confirmed by FT-IR and ¹H NMR. The inclusion complex formation was also characterized in aqueous solution at different pH via UV-Vis titration and phase solubility studies obtaining the stability constant. The 1:1 stoichiometry was established by a Job plot and the inclusion mechanism was clarified using docking experiments. Finally, the antibacterial activity of HPPA and its inclusion complex was tested on P. aeruginosa, E. coli and S. aureus to determine the respective EC_50s and EC_90s. The results showed that the antibacterial activity of HPPA:β-CD against E. coli and S. aureus is higher than that of HPPA. Furthermore, HPPA and HPPA:β-CD, tested on human hepatoblastoma HepG2 and MCF-7 cell lines by MTT assay, exhibited, for the first time, antitumor activities, and the complex revealed a higher activity than that of HPPA. The use of β-CD allows an increase in the aqueous solubility of the drug, its bioavailability and then its bioactivity.     

Direct Regio‐, Diastereo‐, and Enantioselective Vinylogous Michael Addition of Prochiral 3‐Alkylideneoxindoles to Nitroolefins

3‐Alkylidene‐2‐oxindoles represent a simple, yet enabling subfamily of indole alkaloids, and their ability to react as electron‐poor acceptors has largely been investigated. In contrast, their utility as pronucleophilic synthons remains elusive. In this context, the present article describes the successful execution of the direct, organocatalytic asymmetric Michael addition of prochiral 3‐alkylideneoxindoles to nitroolefins. A variety of γ‐substituted alkylideneoxindoles carrying two stereocenters at both the γ‐ and δ‐carbon sites was assembled with excellent stereoselectivity and without olefin isomerization or stereochemical ablation.     

Reactively Modified Poly(lactic acid): Properties and Foam Processing

Summary: In order to produce modified poly(lactic acid) (PLA) resins for applications requiring high melt viscosity and elasticity (e.g., low‐density foaming, thermoforming), a commercial PLA product has been reactively modified in melt by sequentially adding 1,4‐butanediol and 1,4‐butane diisocyanate as low‐molecular‐weight chain extenders. By varying amounts of the two chain extenders associated to the end group contents of PLA, three resulted samples were obtained. They were then structurally characterized by FTIR spectroscopy and molecular structure analysis. Their thermal, dynamic mechanical thermal properties and melt viscoelastic properties were investigated and compared along with unmodified PLA. The results indicated that chemical modification may be characterized as chain scission, extension, crosslinking, or any combination of the three depending on the chain extender amounts. The increase of PLA molecular weight could be obtained by properly controlling amounts of two chain extenders. The samples with increased molecular weights showed enhanced melt viscosity and elasticity. Such property improvements promised a successful application for modified PLA in a batch foam processing by producing foams with reduced cell size, increased cell density and lowered bulk foam density in comparison with plain PLA foam.

Cellular morphology of a modified PLA foam.