Adsorption and desorption kinetics of hydrocarbons in FCC catalysts studied using a tapered element oscillating microbalance (TEOM). Part 2: numerical simulations

The factors affecting the adsorption and desorption kinetics in a TEOM are reviewed in detail with particular attention given to the assumptions required to obtain physical transport parameters from the data. Two models are presented to simulate TEOM adsorption data in the case that concentration differences down the catalyst bed can be neglected, as is appropriate when the amount of catalyst used is small, the carrier gas flowrate is large, and/or the adsorbate partial pressure is low. In the first model, the effective diffusion coefficient, D_e, is taken to be constant. In the second model, the effective diffusion coefficient is assumed to obey the Darken equation, D_e=D₀/(1−θ). The TEOM results obtained on n-hexane, n heptane, n-octane, toluene and p-xylene on a commercial FCC catalyst and on pure rare-earth exchanged zeolite Y under non-reacting conditions (373-) are analysed in detail. It is found that intracrystalline diffusion is not the limiting factor affecting the overall rates of adsorption and desorption for the systems studied. Instead, it is the transport of molecules between the adsorbed and vapour phases at the edge of zeolite crystallites that is the limiting transport step affecting the overall kinetics. For the FCC catalyst, the limiting step is the transport of molecules at the zeolite-matrix interface rather than, say, the matrix-vapour interface. Local rate constants for the desorption of the hydrocarbons at the rate-controlling interface have been obtained.     

Reaction of YBa2Cu3O7-δ Powder with NOx Gas in an Aerosol Reactor

Thermodynamic calculations predict, and experiments verify, that YBa₂Cu₃O₇-₈ (123) powder is unstable in the presence of NO_x-containing aerosol reactor exhaust gases at temperatures below about 600°C. Powders collected above the stability temperature are single-phase 123, while powders collected at lower temperature contain Ba(NO₃)₂ formed by reaction of the powder with NO_x, after exit from the hot zone.     

Recent Advances in MRI Studies of Chemical Reactors: Ultrafast Imaging of Multiphase Flows

NMR has long been established as an in situ technique for studying the solid-state structure of catalysts and the chemical processes occurring during catalytic reactions. Increasingly, pulsed field gradient (PFG) NMR and magnetic resonance imaging (MRI) are being exploited in chemical reaction engineering to measure molecular diffusion, dispersion and flow hydrodynamics within reactors. By bringing together NMR spectroscopy, PFG NMR and MRI, we are now able to probe catalysts and catalytic processes from the angstrom-to-centimeter scale. This article briefly reviews current activities in the field of MRI studies applied to catalysts and catalytic reactors. State-of-the-art measurements, which can already be used in real reactor design studies, are illustrated with examples of single-phase flow with and without chemical reaction in a fixed-bed reactor. The ability to obtain high spatial resolution (< 200μm) in images of the internal structure and flow field within reactors is demonstrated, and the potential uses of these data in reactor design and understanding bed fouling phenomena are discussed. In particular, MRI has produced the first detailed measurements of the extent of heterogeneity in the flow field within fixed-bed reactors. The example of a fixed-bed esterification process is used to show how NMR spectroscopy and MRI techniques can be combined to provide spatially resolved information on both hydrodynamics and chemical conversion within a process unit. The emerging area of ultrafast MRI is then highlighted as an area of particular interest. Recent advances have demonstrated that it is possible to record 2D images over timescales of ～100ms in the magnetically heterogeneous environments typical of heterogeneous chemical reactors. These advances open up opportunities to image many unsteady state processes for the first time. Examples are given of real-time visualization of bubble-train flow in a ceramic monolith and exploring the stability of the gas–liquid distribution as a function of liquid flow rate in a trickle-bed reactor.     

Crystal and magnetic structures of Laves phase compound NdCo2 in the temperature range between 9 and 300 K

The crystal and magnetic structures of the Laves phase compound NdCo₂ in the temperature range from 9 to 300 K are determined by Rietveld refinement technique, using high-resolution neutron powder diffraction data. The compound crystallizes in space group above the magnetic ordering temperature T_C (≈100 K), in space group I4₁/amd below T_C and in space group Imma below the tetragonal–orthorhombic structural/magnetic transitions at T_M ≈ 42 K. The assignment of the space groups to the crystal structures of NdCo₂ in different temperature ranges complies with the reported Mössbauer studies. Detailed information of the crystal and magnetic structures of NdCo₂ at different temperatures are reported.     

Ongoing verification of a multiphysics community code: FLASH

When developing a complex, multi‐authored code, daily testing on multiple platforms and under a variety of conditions is essential. It is therefore necessary to have a regression test suite that is easily administered and configured, as well as a way to easily view and interpret the test suite results. We describe the methodology for verification of FLASH, a highly capable multiphysics scientific application code with a wide user base. The methodology uses a combination of unit and regression tests and an in‐house testing software that is optimized for operation under limited resources. Although our practical implementations do not always comply with theoretical regression‐testing research, our methodology provides a comprehensive verification of a large scientific code under resource constraints.Copyright © 2013 John Wiley & Sons, Ltd.     

Up in smoke: I. Smoke-derived germination cues for postfire annual,Nicotiana attenuata torr. Ex. Watson

Some postfire annuals with dormant seeds use heat or chemical cues from charred wood to synchronize their germination with the postfire environment. We report that wood smoke and polar extracts of wood smoke, but not the ash of burned wood, contain potent cue(s) that stimulate germination in the postfire annual plant,Nicotiana attenuata. We examined the responses of seeds from six populations of plants from southwest Utah to extracts of smoke and found the proportion of viable seeds that germinated in the presence of smoke cues to vary between populations but to be consistent between generations. With the most dormant genotypes, we examine three mechanisms by which smoke-derived chemical cues may stimulate germination (chemical scarification of the seed coat and nutritive- and signal-mediated stimulation of germination) and report that the response is consistent with the signal-mediated mechanism. The germination cue(s) found in smoke are produced by the burning of hay, hardwood branches, leaves, and, to a lesser degree, cellulose. Moreover, the cues are found in the common food condiment, liquid smoke, and we find no significant differences between brands. With a bioassay-driven fractionation of liquid smoke, we identified 71 compounds in active fractions by GC-MS and AA spectrometry. However, when these compounds were tested in pure form or in combinations that mimicked the composition of active fractions over a range of concentrations, they failed to stimulate germination to the same degree that smoke fractions did. Moreover, enzymatic oxidation of some of these compounds also failed to stimulate germination. In addition, we tested 43 additional compounds also reported from smoke, 85 compounds that were structurally similar to those reported from smoke and 34 compounds reported to influence germination in other species. Of the 233 compounds tested, 16 proved to inhibit germination at the concentrations tested, and none reproduced the activity of wood smoke. By thermally desorbing smoke produced by cellulose combustions that was trapped on Chromosorb 101, we demonstrate that the cue is desorbed between 125 and 150°C. We estimate that the germination cues are active at concentrations of less than 1 pg/seed and, due to their chromatographic behavior, infer that a number of different chemical structures are active. In separate experiments, we demonstrate that cues remain active for at least 53 days in soil under greenhouse conditions and that the application of aqucous extracts of smoke to soil containing seeds results in dramatic increases in germination of artificial seed banks. Hence, although the chemical nature of the germination cue remains elusive, the stability of the germination cues, their water-solubility, and their activity in low concentrations suggest that these cues could serve as powerful tools for the examination of dormant seed banks and the selective factors thought to be important in the evolution of postfire plant communities.     

Building brains for bodies

We describe a project to capitalize on newly available levels of computational resources in order to understand human cognition. We are building an integrated physical system including vision, sound input and output, and dextrous manipulation, all controlled by a continuously operating large scale parallel MIMD computer. The resulting system will learn to think by building on its bodily experiences to accomplish progressively more abstract tasks. Past experience suggests that in attempting to build such an integrated system we will have to fundamentally change the way artificial intelligence, cognitive science, linguistics, and philosophy think about the organization of intelligence. We expect to be able to better reconcile the theories that will be developed with current work in neuroscience.     

Bond line thickness and die tilt inspection in die bonding process

This study focuses upon building an automated inspection system for the in-line measurement of bond-line thickness (BLT) and die tilt in die attachments in the semiconductor packaging process. A prototype of a visual system utilizing the line scan stereo vision technique via two linear CCD cameras has been developed for the die bonding quality inspection. A novel algorithm is proposed for the determination of the 3D coordinates of certain points on an object. The BLT and die tilt of a die attached chip of substrate height 800 μm and cross section 15 × 15 mm² were measured to be approximately 76.8 μm and 0.00094, respectively. The measurement can be completed within one second. Thus the in-line inspection of die bonding quality can be conducted efficiently using the proposed technique.