Optical dot gain on newsprint determined with the Lund nuclear microprobe

A technique for measuring optical dot gain, i.e. the relative difference between the actual screen dot and the optically perceived one, is presented. By combining measurements from the non-optical nuclear microprobe with data from image analyzing technique the optical dot gain can be determined. The procedure to reach pixel by pixel correlation on a micrometer scale is discussed. In the newsprint sample studied in this investigation a typical optical dot gain between 15 and 20% was deduced. The variation in the optical dot gain was correlated with other characteristic parameters of the print and newsprint and especially a positive correlation to the mass density of the newsprint was observed.     

Solution and applications of the Lyapunov equation for controlsystems

Recent advances in control systems analysis and design have implied new uses for the Lyapunov equation of the form AX+XA^T+Q=0. Implementation requirements for the incorporation of the use of Lyapunov equations in practical design, however, point out the need for a set of specialized numerical procedures. This special set of numerical procedures must efficiently solve large, sparse Lyapunov equations, solve sets of Lyapunov equations that differ only in the coefficient matrix Q, and provide good low rank estimates of the Lyapunov equation solution X in the case where low rank approximations are applicable. Discussions of the motivations for the solution of these problems and of candidate solution approaches are provided     

The oxidative inducation test applied to medical PVC and other polymers

We have examined the applicability of this simple and effective test to polymer systems widely used in the medical industry. First, it was found that not every polymer examined exhibited a distinct onset of autocatalytic oxidation detectable by DSC. However, for cases where distinct onsets are found, powerful insights can be obtained. These included activation energy of the degradation, thermal oxidative shelf life prediction, and correlation, with product performances. Actual examples are presented to illustrate the utility of the test.     

Interaction of powder microparticles with the steel matrix under dynamic action

Conclusions In dynamic interaction of powder particles and the steel matrix at the points of their retarding and stoppage, significant high-velocity plastic deformation occurs according to shear, rotational, and twinning mechanisms, which, together with local microalloying of the matrix with elements of the particles, promotes additional hardening of the steel. Processes of complete restoration of the structure in these areas are undesirable since they reduce the effect of hardening of the steel with dispersed particles.Dnepropetrovsk Metallurgical Institute. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 2, pp. 44–45, February, 1991.     

A new SPICE model of power P-I-N diode based on asymptotic waveformevaluation

A new SPICE subcircuit model for power p-i-n diodes is proposed in this paper. The model is based on a moment-matching approximation of the ambipolar diffusion equation. It is shown that both the quasistatic model and the lumped charge model can be obtained as ion-order moment-matching approximations while new and more accurate models can be obtained from higher-order solutions. The proposed model takes into account emitter recombination in the highly doped end regions, conductivity modulation in the base and the moving-boundaries effect during reverse-recovery, showing good convergence properties and fast simulation times. Comparisons between the results of the SPICE model and both numerical device simulations and experimental results are presented     

Qualitativ-quantitative Simulation, ein Instrument zur Analyse nichtlinearer Regelkreise

Qualitative-quantitative simulation is one of the most productive and promising research areas in Artificial Intelligence to emerge in recent years. This method provides an elegant way for an exhaustive analysis of uncertain dynamic systems. The application of the qualitative-quantitative simulation is shown in this paper. The important question about the stability of a quanlitatively described dynamical system is solved by a novel analytic method.     

From categorial to dimensional diagnosis

The concepts of categorical and dimensional assessment approaches and their specific advantages--and disadvantages are described. A combination of both concepts within the framework of Multiple Assessment of Psychiatric Disturbances is proposed. This includes the different levels of behavioural and emotional disturbances, different assessment methods, the situational specificity of behavioural and emotional disturbances and individually tailored and treatment related assessment procedures. Thereby two phases are distinguished. In the first phase basic procedures of the Multiple Assessment of Psychiatric Disturbances are accomplished, which cover a broad spectrum of behavioural and emotional problems. In the second phase a differentiated picture of the-specific disturbance is assessed by using symptom-specific instruments of the Multiple Assessment of Psychiatric Disturbances. In a case report the diagnostic procedure is explained.     

Shaping axisymmetric shells

Assuming constant strains in thickness, the author examines the problem of shaping axisymmetric shells of elastoplastic materials. The results of computer calculations are presented.On the basis of the data obtained in [1] and assuming constant strain through the thickness, we examine the problem of shaping axisymmetric shells made of an elastoplatic material.Translated from Problemy Prochnosti, No. 4, pp. 18–24, April, 1992.     

Preparation of Poly(D,L-Lactide/Glycolide) Nanoparticles of Controlled Particle Size Distribution: Application of Experimental Designs

This study investigates the use of the solvent evaporation method for preparing acid and glycolic acid-based copolymer nanoparticles. Initially, appropriate technological and formulation factors for elaboration of polymeric particles were selected by screening. Most favourable results were obtained using polyvinyl alcohol as a dispersing agent and a high pressure homogenizer to reduce the droplet size of the emulsion initially formed. On the basis of the conclusion thus drawn, a composite rotational experimental design was employed to evaluate the joint influence of three formulation variables (phase volume ratio of the emulsion formed, polymer concentration and homogenization pressure) on the micromeritic properties of the suspension finally obtained (mean particle size, coefficient of variation and polydispersity of the particle size distribution). Analysis of variance corresponding to the experimental design, showed a significant influence of the volume phase ratio and the polymer concentration on the mean particle size and the coefficient of variation, whereas the polydispersity is also affected by the homogenization pressure. Considering this information, a 3² experimental factorial design was then selected to investigate the possible interaction between the phase volume ratio and the concentration of polyvinyl alcohol in the aqueous phase. Analysis of variance and subsequent sequencial regression analysis evidenced last hypothesis providing the way to determine the experimental conditions required to achieve a specific particle size distribution.