氧化硅有序介孔材料MCM-41的微波水热合成及用于组装ZnO纳米粒子

与传统水热合成工艺相比,采用微波水热合成新工艺可以快速合成比表面积大、孔体积和孔径大、孔径分布范围更窄、孔洞呈六方排布的有序介孔材料MCM-41.微波水热合成工艺合成的MCM-41具有合成效率高、成功率高等特点,为此类介孔材料商业化提供了高效的技术手段.采用传统水热工艺合成MCM-41通常需要48～72 h,而采用微波水热合成技术仅需要30 min.采用X射线粉晶衍射(XRD),氮气吸附等技术手段对合成MCM-41材料的物相、比表面积、孔体积、孔径等进行了表征.采用微波水热合成MCM-41的工艺参数为:微波处理的温度120 ℃,时间30 min,微波辐射功率500 W,经过滤、洗涤、干燥、焙烧等处理后,得到的MCM-41具有六方排布的孔系,晶格常数a0=4.4nm,比表面积可达1113 m2/g,平均孔径为2.7 nm,与选用同样配方采用传统水热合成工艺合成的MCM-41的性能相当,却极大提高了合成效率.采用微波水热合成工艺,同样可以合成立方晶系的MCM-48和六方晶系的SBA-15等介孔氧化硅分子筛材料.此外,在微波合成的MCM-41中采用液相工艺成功组装了ZnO纳米粒子,并对组装在MCM-41中的纳米ZnO粒子进行了光催化降解苯酚的实验研究.     

氯乙酸生产工艺的改进与探讨

介绍了影响氯乙酸质量、消耗的因素,探讨了对氯乙酸工艺的改进措施。     

甲基-酰基-萘在庚烷、辛烷和十二烷中溶解度的测定与关联

The solubilities of 2-methyl-6-acetylnaphthalene (2,6-MAN) and 2-methyl-7-acetylnaphthalene (2,7-MAN) in n-heptane, n-octane, and n-dodecane were measured, respectively, from 273.15 to 319.15 K using an analytical method. On the basis of the thermodynamics theory of solid-liquid equilibrium, a model was derived to relate the solubilities with temperature. Using the least square method, the parameters of the model, the fusion enthalpies △fusH and the Margules equation coefficients A12 and A21 of 2,6-MAN and 2,7-MAN in n-heptane, n-octane, and n-dodecane-were obtained by regressing the experimental data. The average deviation of the model was 1.70%.     

A new core–shell type fluorinated acrylic and siliconated polyurethane hybrid emulsion

A novel core–shell type fluorinated acrylic and siliconated polyurethane (FSiPUA) hybrid emulsion was prepared by seeded emulsion polymerization using siliconated polyurethane (SiPU) as a seed and forming the structure with SiPU as a shell and the copolymer of butyl acrylate (BA) with 2,2,2-trifluoroethylmethacrylate (TFEMA) as a core. SiPU was synthesized using isophorone diisocyanate (IPDI), polytetramethylene ether glycol (PTMG), polypropylene glycol (PPG), dihydroxybutyl-terminated polydimethylsiloxane (PDMS), dimethylol propionic acid (DMPA), 1,6-hexanediol (HDO) and triethylamine (TEA). The contents of siloxane and fluorine were determined according to the feed ratio. Fourier transform infrared spectroscopy (FTIR) was used to identify the chain structure of SiPU and FSiPUA. Investigation of transmission electron microscopy (TEM) confirmed the core–shell structure of FSiPUA emulsion and gave the particle size at about 50 nm. The measurement results of water contact angles and the solvent absorptions in water and n-octane for cured films showed that the water and the oil repellency for FSiPUA had been improved significantly with a suitable content of fluorine and siloxane.     

家用电器保温隔热用聚合MDI的研制

根据分子设计的原理，通过研究聚合MDI组成与性能之间的关系，优化了聚合MDI的合成工艺，进而研制出家用电器保温隔热用聚合MDI，并对其进行性能评价。结果表明，所研制的聚合MDI可以替代进口产品，用于家用电器的保温隔热。     

我公司造气技术改造总结

针对原中氮流程造气存在的不足,借鉴小氮肥造气优点,对我公司造气系统的工艺、设备进行了大规模的技术改造,取得了明显的经济效益。     

应用膜生物反应器处理焦化污水

膜生物反应器(MBR)是膜分离与生物反应器相结合的新型水处理技术。焦化污水是一种高浓度、难降解的工业污水，应用传统的生化方法处理焦化污水存在费用大、效率低的缺点。作者采用一体浸没式膜生物反应器处理焦化污水，调整合适的操作参数，污水中主要污染物COD、NH2-N的去除率分别达到80％、98％以上，操作简单，出水水质稳定，且远好于国家一级排放标准，取得了良好的效果，有一定的推广意义。     

4-羟基-3-碘-5-硝基苯甲腈的新合成方法

报道了以对羟基苯甲醛为原料，经过硝化、腈化和碘化反应合成牛羊抗肝片吸虫药4-羟基-3-碘-5-硝基苯甲腈的新方法，总收率为76．9％，纯度达96．8％。     

Effect of rare earth elements surface treatment on tensile properties of aramid fiber‐reinforced epoxy composites

Solutions of rare earth modifier (RES) and epoxy chloropropane (ECP) grafting modification method were used for the surface treatment of aramid fiber. Tensile properties of both the aramid/epoxy composites and single fibers were tested. The effects of RES concentration on tensile properties of aramid/epoxy composites were investigated in detail to explore an optimum amount of rare earth elements in solution for modifying aramid fiber. The fracture surface morphologies of tensile specimens were observed and analyzed with the aid of SEM. The experimental results show that rare earth treatment is superior to ECP grafting treatment in promoting interfacial adhesion between the aramid fiber and epoxy matrix. Meanwhile, the tensile strengths of single fibers were almost not affected by RES treatment. The optimum performance is obtained when the content of rare earth elements is 0.5 wt %. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1037–1041, 2004     

Parametrized Maximum Principle Preserving Flux Limiters for High Order Schemes Solving Multi-Dimensional Scalar Hyperbolic Conservation Laws

In this paper, we will extend the strict maximum principle preserving flux limiting technique developed for one dimensional scalar hyperbolic conservation laws to the two-dimensional scalar problems. The parametrized flux limiters and their determination from decoupling maximum principle preserving constraint is presented in a compact way for two-dimensional problems. With the compact fashion that the decoupling is carried out, the technique can be easily applied to high order finite difference and finite volume schemes for multi-dimensional scalar hyperbolic problems. For the two-dimensional problem, the successively defined flux limiters are developed for the multi-stage total-variation-diminishing Runge–Kutta time-discretization to improve the efficiency of computation. The high order schemes with successive flux limiters provide high order approximation and maintain strict maximum principle with mild Courant-Friedrichs-Lewy constraint. Two dimensional numerical evidence is given to demonstrate the capability of the proposed approach.