CORRELATION FOR DROP SIZE IN LIQUID/LIQUID SPRAY COLUMNS

A single equation is presented which predicts the drop size in liquid/liquid spray columns up to the critical nozzle velocity:

with an average deviation of 9.7%. This can be reduced to 7.3% if two regions are considered separated by a critical nozzle diameter:     

Effect of deformation temperature on precipitation,microstructural evolution,mechanical and corrosion behavior of 6082 Al alloy

The influence of cryorolling (CR), room temperature rolling (RTR) and post annealing on precipitation, microstructural evolution (recovery, recrystallisation and grain growth), mechanical and corrosion behavior, was investigated in the present work. The precipitation kinetics and microstructural morphology of CR, RTR, and post annealed samples were investigated by differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and electron back scattered diffraction (EBSD) to elucidate the observed mechanical properties. After annealing at 200 °C, UTS and hardness of CR samples (345 MPa and HV 127) were improved as compared to RTR samples (320 MPa and HV 115). The increase in hardness and UTS of CR samples after annealing at 200 °C was due to precipitation of β″ from Al matrix, which imparted higher Zener drag effect as compared to RTR samples. The improvement in corrosion and pitting potentials was observed for CR samples (?1.321 V and ?700 mV) as compared to RTR samples (?1.335 V and ?710 mV). In CR samples, heavy dislocation density and dissolution of Mg₄Al₃Si₄-precipitates in the Al matrix have improved corrosion resistance of the alloy through formation of protective passive layer and suppression of galvanic cell, respectively.     

搅拌摩擦对接焊6061铝合金的高周疲劳行为（英文）

对6061铝合金进行搅拌摩擦对接焊,其焊接工艺参数为:旋转速度600、800、1000、1200 r/min,前进速度80、100 mm/min,探针插入深度1.85 mm。基于搅拌摩擦焊参数计算得到的能量输入结果表明,在输入能量为196~405 kJ的情况下,接头在297~354 kJ的输入能量范围内有最大的抗拉强度。在不同的应力比(R=0.5,0.3,0.1,-0.3,-0.5)下,将高强度、低强度2种焊接头进行疲劳测试。结果表明,对于这2种焊接头,显微组织特征明显影响其疲劳性能,比如搅拌区、热力影响区(TMAZ)和热影响区。从接头的显微组织、裂纹扩展路径和断裂表面观察等方面对其疲劳强度进行讨论。     

搅拌摩擦对接焊6061铝合金的高周疲劳行为

对6061铝合金进行搅拌摩擦对接焊,其焊接工艺参数为：旋转速度600、800、1000、1200 r/min,前进速度80、100 mm/min,探针插入深度1.85 mm。基于搅拌摩擦焊参数计算得到的能量输入结果表明,在输入能量为196～405 kJ的情况下,接头在297～354 kJ的输入能量范围内有最大的抗拉强度。在不同的应力比（R=0.5,0.3,0.1,-0.3,-0.5）下,将高强度、低强度2种焊接头进行疲劳测试。结果表明,对于这2种焊接头,显微组织特征明显影响其疲劳性能,比如搅拌区、热力影响区（TMAZ）和热影响区。从接头的显微组织、裂纹扩展路径和断裂表面观察等方面对其疲劳强度进行讨论。     

新型PEO/纳米结构ZrO_2镁合金涂层的抗菌活性及腐蚀行为（英文）

为了增强镁合金的耐腐蚀性和抗菌活性,先采用等离子体电解氧化(PEO)在镁合金上制备一层结合层,再用空气等离子喷涂(APS)制备纳米结构ZrO_2表面涂层。采用电化学试验研究涂层样品的腐蚀行为,采用琼脂扩散法对其进行大肠杆菌病原菌抑菌活性评价,并与无涂层样品进行对比。与PEO涂层和无涂层镁合金相比,PEO/纳米ZrO_2涂层样品的腐蚀电流密度最低,电荷传递阻力最高,相位角和阻抗模量最高。PEO结合涂层被纳米ZrO_2表面涂层完全密封,能够显著延缓侵蚀性离子向镁合金表面迁移,显著提高镁合金在模拟体液(SBF)中的耐蚀性。此外,PEO/纳米ZrO_2涂层的抗菌活性也高于PEO涂层和无涂层镁合金,这是由于ZrO_2纳米颗粒通过作用于细胞膜而降低了大肠杆菌的生长速率。     

Diffraction effects and inelastic electron transport in angle‐resolved microscopic imaging applications

We analyse the signal formation process for scanning electron microscopic imaging applications on crystalline specimens. In accordance with previous investigations, we find nontrivial effects of incident beam diffraction on the backscattered electron distribution in energy and momentum. Specifically, incident beam diffraction causes angular changes of the backscattered electron distribution which we identify as the dominant mechanism underlying pseudocolour orientation imaging using multiple, angle‐resolving detectors. Consequently, diffraction effects of the incident beam and their impact on the subsequent coherent and incoherent electron transport need to be taken into account for an in‐depth theoretical modelling of the energy‐ and momentum distribution of electrons backscattered from crystalline sample regions. Our findings have implications for the level of theoretical detail that can be necessary for the interpretation of complex imaging modalities such as electron channelling contrast imaging (ECCI) of defects in crystals. If the solid angle of detection is limited to specific regions of the backscattered electron momentum distribution, the image contrast that is observed in ECCI and similar applications can be strongly affected by incident beam diffraction and topographic effects from the sample surface. As an application, we demonstrate characteristic changes in the resulting images if different properties of the backscattered electron distribution are used for the analysis of a GaN thin film sample containing dislocations.     

DNACDS: Cloud IoE big data security and accessing scheme based on DNA cryptography

The Internet of Everything (IoE) based cloud computing is one of the most prominent areas in the digital big data world. This approach allows efficient infrastructure to store and access big real-time data and smart IoE services from the cloud. The IoE-based cloud computing services are located at remote locations without the control of the data owner. The data owners mostly depend on the untrusted Cloud Service Provider (CSP) and do not know the implemented security capabilities. The lack of knowledge about security capabilities and control over data raises several security issues. Deoxyribonucleic Acid (DNA) computing is a biological concept that can improve the security of IoE big data. The IoE big data security scheme consists of the Station-to-Station Key Agreement Protocol (StS KAP) and Feistel cipher algorithms. This paper proposed a DNA-based cryptographic scheme and access control model (DNACDS) to solve IoE big data security and access issues. The experimental results illustrated that DNACDS performs better than other DNA-based security schemes. The theoretical security analysis of the DNACDS shows better resistance capabilities.