Electrocatalytic Determination of Glucose in a Ringer''s Solution by Pulse-Voltammetry

Improvement of the electrocatalytic method of glucose determination was achieved by applying the pulse voltammetry technique. This technique, compared. to previously applied cyclic voltammetry, enhances selectivity of a platinum-black working electrode for glucose measurement. A low catalytic load working electrode has been used which is less susceptible to poisoning and has longer term stability. With cyclic voltammetry previously applied, those electrodes were limited by their narrow concentration range for glucose detection. By applying a pulsing technique, these electrodes exhibit linearity up to a glucose concentration 200 mg/dl with correlation coefficients greater than 0.9. The pulse voltammetry diminishes interference by low molecular weight serum components such as serum urea. Concentrations from 20. to 40 mg/di had an interference of 4 percent compared to 40 percent with cyclic voltammetry. Further investigations are carried on to adopt pulse voltammetry for direct measurements of glucose in body fluids.     

PAN‐based fibers modified with two‐component ceramic nanoparticles

The authors determined conditions for manufacturing PAN precursor fibers containing a system of two nanoadditives, montmorillonite (MMT), and hydroxyapatite (HAp) in their structure. The PAN precursor fibers thus obtained are characterized by a tenacity of more than 30 cN/tex and a total volume of pores at the level of 0.29 cm³/g. Furthermore, it was found that the use of nanoadditives entails the remodeling of the paracrystalline structure of PAN fibers into a strictly crystalline one. This is accompanied by a decrease in spacing between MMT layers combined with their partial exfoliation. The fibers thus obtained, after being carbonized, will be used for medical applications. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Protein Arginine Methyltransferase (PRMT) Inhibitors—AMI-1 and SAH Are Effective in Attenuating Rhabdomyosarcoma Growth and Proliferation in Cell Cultures

Rhabdomyosarcoma (RMS) is a malignant soft tissue cancer that develops mostly in children and young adults. With regard to histopathology, four rhabdomyosarcoma types are distinguishable: embryonal, alveolar, pleomorphic and spindle/sclerosing. Currently, increased amounts of evidence indicate that not only gene mutations, but also epigenetic modifications may be involved in the development of RMS. Epigenomic changes regulate the chromatin architecture and affect the interaction between DNA strands, histones and chromatin binding proteins, thus, are able to control gene expression. The main aim of the study was to assess the role of protein arginine methyltransferases (PRMT) in the cellular biology of rhabdomyosarcoma. In the study we used two pan-inhibitors of PRMT, called AMI-1 and SAH, and evaluated their effects on proliferation and apoptosis of RMS cells. We observed that AMI-1 and SAH reduce the invasive phenotype of rhabdomyosarcoma cells by decreasing their proliferation rate, cell viability and ability to form cell colonies. In addition, microarray analysis revealed that these inhibitors attenuate the activity of the PI3K-Akt signaling pathway and affect expression of genes related to it.     

2‐Acetyl‐4,6,8,10,12‐Pentanitro‐Hexaazaisowurtzitane (PNAIW) Preparation and Properties

2‐Acetyl‐4,6,8,10,12‐pentanitro‐2,4,6,8,10,12‐hexaazaisowurtzitane (PNAIW) is formed in the last step of nitration of acetyl isowurtzitane derivatives. The amount of the PNAIW formed depends on the conditions of the nitration reaction (temperature, time, and nitrating mixture used) and on the type of the starting acetyl intermediate. The highest PNAIW yields (30 %) were obtained by nitrating 2,6,8,12‐tetraacetylhexaazaisowurtzitane (TAIW) at 60 °C for half an hour using HNO₃/H₂SO₄ nitrating mixture. HPLC, NMR, FTIR, and DSC measurements were used in the study and their results are reported.     

Network structure/mechanical property relationship in crosslinked dimethacrylates of different chain lengths

In this article, the syntheses of three novel dimethacrylates of different chain lengths as well as the mechanical and thermal properties of their copolymers with methyl methacrylate and styrene were studied. The monomers were prepared by the reaction of glycidyl methacrylate with dicarboxylic acid esters obtained from maleic anhydride and ethylene, 1,4‐butylene and 1,6‐hexylene glycols. The addition reaction of glycidyl methacrylate and the acidic compound was carried out in the presence of basic catalyst, tetraethylammonium bromide. The monomers were UV‐copolymerized with methyl methacrylate and styrene in the presence of a photoinitiator which was 2,2‐dimethoxy‐2‐phenyloacetophenone. The prepared polymers were subjected to different studies concerning evaluation of their flexural properties, thermal stability, dynamic mechanical behavior as well as qualitative estimation of the content of unreacted double bonds. The dependence of glass transition temperatures (T_g) as well as degree of inhomogeneity on the crosslinking density has been examined in different copolymer systems. Evidence that the dependence of the T_g on the crosslinking density is not straightforward is presented. Dynamic mechanical measurements have demonstrated that the heterogeneity of the crosslinked polymers depends strongly on the crosslinking density of the system and the nature of methacrylate monomers used. Depending on the monomer size as well as its functionality, the resultant polymer may have features such as crosslinks or residual unsaturations that influence and define the properties of the materials. It is proved that the new dimethacrylates change their functionality in copolymerization with different monovinyl monomers. Also, the degree of unsaturated bonds conversion was found to be growing with the amount of monovinyl in the copolymer. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effects of metal cations on betanin stability in aqueous-organic solutions

An effect of metal cations on betanin stability was investigated in aqueous and organic-aqueous solutions. The presence of organic solvents (methanol, ethanol, and acetonitrile) affects substantially the pigments decomposition in acidic media induced by metal cations whose degrading action in such media is significantly higher than in aqueous solutions. The influence of Cu²⁺ on the stability was studied by spectrophotometry in more detailed manner, because of its ability to form complexes with betanin. The possibility of a complex formation between betanin and Ni²⁺ was also stated at pH 7–8; its relatively high stability in aqueous samples was observed. A presence of numerous products of betanin decomposition was detected in the wavelength range 380–500 nm in spectra obtained for most of metal cations investigated, especially for higher concentrations of the organic solvents.     

Levels of 13 multi-class pesticide residues in Polish honeys determined by LC-ESI-MS/MS

Levels of 13 pesticides in 40 honey samples form Poland are reported. A rapid and sensitive method was developed for the LC-ESI-MS/MS determination of multi-class pesticide residues in honey samples. Liquid–liquid extraction (LLE) on a diatomaceous earth support (requiring the use of small amounts of organic solvent), followed by chromatographic separation on a C₁₈ column and gradient elution were employed. The method quantifies over a dynamic linear range from respective MQLs (0.06–1.3 ng/g) to 5 ng/g. Matrix effects were evaluated by comparing the slopes of matrix-matched and solvent-based calibration curves. The mean recoveries obtained for three fortification levels (0.5, 1.0 and 4.0 ng/g) were 63–117% for most compounds, with an expanded uncertainty of <10%. The results for real honey samples collected from five regions of Poland (Pomerania, Wielkopolska, Lublin Region, Lower and Upper Silesia), showed that residue concentrations were <5 ng/g and did not pose a threat to human health.     

Influence of the lubricant on temperature distribution in the forging dies

Experimental and theoretical analysis of the influence of the lubricant on the temperature distribution in the tool during forging is presented. Finite element solution of the general diffusion equation is used to calculate the heat transfer contact between the die and the hot workpiece and during the interpass times. The results of calculations are compared with the results of measurements carried out using thermocouples inserted in the die. Two ways of modelling heat transfer through the contact surface are considered. The first treats a lubricant as a separate layer with the relevant thermal properties. The second assumes a temperature discontinuity at the interface and introduces the heat transfer coefficient. Insulating properties of various lubricants are compared. White-water lubricant shows the best insulating properties. The values of the heat transfer coefficient obtained from the inverse analysis vary from 2600 (without lubrication) to 1500 W/m²K (white lubricant).