Microencapsulation of β‐carotene using native pinhão starch,modified pinhão starch and gelatin by freeze‐drying

Beta‐carotene was microencapsulated by freeze‐drying using native pinhão starch, hydrolysed pinhão starch 6 dextrose equivalent (DE), hydrolysed pinhão starch 12 DE and the mixture of these materials with gelatin as coating material. The purpose of this research was to produce and characterize these microcapsules. The capsules’ efficiency, surface content, moisture, morphology, solubility, particle size and glass transition temperature were analysed. The hydrolysed pinhão starch 12 DE showed the highest total β‐carotene content and the lowest surface β‐carotene content, unlike the native starch. Using scanning electron microscopy, it was observed that all microcapsules presented undefined shapes. The samples with gelatin had wider particle size distribution, higher diameters, lower solubility and higher glass transition temperature when compared with other the samples. Results obtained suggest that the modified pinhão starch can be considered as potential wall material for encapsulation of β‐carotene.     

Presynchronization with Double-Ovsynch improves fertility at first postpartum artificial insemination in lactating dairy cows

The objective of this study was to compare circulating progesterone (P4) profiles and pregnancies per AI (P/AI) in lactating dairy cows bred by timed artificial insemination (TAI) following Ovsynch-56 after 2 different presynchronization protocols: Double-Ovsynch (DO) or Presynch-Ovsynch (PS). Our main hypothesis was that DO would increase fertility in primiparous cows, but not in multiparous cows. Within each herd (n = 3), lactating dairy cows (n = 1,687; 778 primiparous, 909 multiparous) were randomly assigned to DO [n = 837; GnRH-7d-PGF_2α-3d-GnRH-7d-Ovsynch-56 (GnRH-7d-PGF_2α-56h-GnRH-16hTAI)] or PS (n = 850; PGF_2α-14d-PGF_2α-12d-Ovsynch-56). In 1 herd, concentrations of P4 were determined at the first GnRH (GnRH1) of Ovsynch-56 and at d 11 after TAI (n = 739). In all herds, pregnancy was diagnosed by palpation per rectum at 39 d. In 1 herd, the incidence of late embryo loss was determined at 74 d, and data were available on P/AI at the subsequent second service. Presynchronization with DO reduced the percentage of animals with low P4 concentrations (<0.50 ng/mL) at GnRH1 of Ovsynch-56 (5.4 vs. 25.3%, DO vs. PS). A lesser percentage of both primiparous and multiparous cows treated with DO had low P4 concentrations at GnRH1 of Ovsynch-56 (3.3 vs. 19.7%, DO vs. PS primiparous; and 8.8 vs. 31.9%, DO vs. PS multiparous). Presynchronization with DO improved P/AI at the first postpartum service (46.3 vs. 38.2%, DO vs. PS). Statistically, a fertility improvement could be detected for primiparous cows treated with DO (52.5 vs. 42.3%, DO vs. PS, primiparous), but only a tendency could be detected in multiparous cows (40.3 vs. 34.3%, DO vs. PS, multiparous), consistent with our original hypothesis. Presynchronization treatment had no effect on the incidence of late embryo loss after first service (8.5 vs. 5.5%, DO vs. PS). A lower body condition score increased the percentage of cows with low P4 at GnRH1 of Ovsynch-56 and reduced fertility to the TAI. In addition, P4 concentration at d 11 after TAI was reduced by DO. The method of presynchronization at first service had no effect on P/AI at the subsequent second service (34.7 vs. 36.5%, DO vs. PS). Thus, presynchronization with DO induced cyclicity in most anovular cows and improved fertility compared with PS, suggesting that DO could be a useful reproductive management protocol for synchronizing first service in commercial dairy herds.     

Natural Lignocellulosic Fibers as Engineering Materials—An Overview

Recent investigations on the tensile properties of natural cellulose-based fibers revealed an increasing potential as engineering materials. This is particularly the case of very thin fibers of some species such as sisal, ramie, and curaua. However, several other commonly used fibers such as flax, jute, hemp, coir, cotton, and bamboo as well as less known bagasse, piassava, sponge gourde, and buriti display tensile properties that could qualify them as engineering materials. An overview of the strength limits attained by these fibers is presented. Based on a tensile strength vs density chart, it is shown that natural fibers stand out as a relevant class of engineering materials.     

Influence of CTAB on the electrochemical behavior of dopamine and on its analytic determination in the presence of ascorbic acid

This research work concerns the electrochemical study of dopamine and ascorbic acid in the presence of the cationic surfactant cetyltrimethylammonium bromide. From this study is possible to note that the cetyltrimethylammonium bromide greatest influence was on the dopamine, because it disfavors both its oxidation and reduction, thereby giving a smaller heterogeneous rate constant, k ⁰, value than in its absence, provoking that the process tends to irreversibility. On the contrary, for the ascorbic acid case, its oxidation was favored; these effects can influence the separation of the dopamine and ascorbic acid voltammetric signals up to 453 mV. Further, the method could be optimized through differential pulse voltammetry to proceed with the analytic determination of dopamine in the presence of ascorbic acid displaying usable analytic parameters, namely: a linearity range of 0–130 μM, a sensitivity of (6.318 ± 0.002) μA mM^?1, a detection limit of (11 ± 0.1) μM, and a quantification limit of (37 ± 0.2) μM, which made it possible to effect the quantification on a commercial pharmaceutical sample.     

Anchoring of Chiral Manganese(III) Salen Complex onto Organo Clay and Porous Clay Heterostructure and Catalytic Activity in Alkene Epoxidation

The chiral Mn(III) salen complex (C1) was immobilised onto a natural clay (BEN) and a porous clay heterostructure (PCH) functionalised with 3-aminopropyltriethoxysilane (APTES). FTIR, XPS and Mn chemical analysis confirm the C1 anchorage in both materials, but with higher efficiency in BEN_APTES clay. The catalytic activity of C1@BEN_APTES and C1@PCH_APTES, was assessed in the epoxidation of styrene (sty) and ∝-methylstyrene (∝-Mesty) using NaOCl and m-chloroperoxybenzoic acid (m-CPBA)/N-methylmorpholine-N-oxide (NMO). Both materials behave as moderate catalysts, show high epoxide selectivity but low enantiomeric excesses. In the case of sty epoxidation with m-CBPA/NMO the C1@PCH_APTES catalyst showed the highest catalytic activity, whereas in ∝-Mesty epoxidation, the C1@PCH_APTES catalyst, although leading to lower substrate conversion than the BEN analogue, presented the lowest complex leaching. In all cases, the oxidant NaOCl had some destructive effect in the hybrid catalysts, highlighting the importance of a careful choice of catalyst and oxidant system.     

The impact of wave energy farms in the shoreline wave climate: Portuguese pilot zone case study using Pelamis energy wave devices

This paper describes the study of the impact of energy absorption by wave farms on the nearshore wave climate and, in special, the influence of the incident wave conditions and the number and position of the wave farms, on the nearshore wave characteristics is studied and discussed. The study was applied to the maritime zone at the West coast off Portugal, namely in front of São Pedro de Moel, where it is foreseen the deployment of offshore wave energy prototypes and farms between the 30 m and 90 m bathymetric lines, with an area of 320 Km². In this study the REFDIF model was adapted in order to model the energy extraction by wave farms. Three different sinusoidal incident wave conditions were considered. Five different wave farm configurations, varying the position of the wave farm, its number and the width of the navigation channels at each wave farm were analysed. The results for each configuration in terms of the change of the wave characteristics (wave height and wave direction) at the nearshore are presented, compared and discussed for three representative wave conditions.     

Effect of Amphipathic HIV Fusion Inhibitor Peptides on POPC and POPC/Cholesterol Membrane Properties: A Molecular Simulation Study

T-20 and T-1249 fusion inhibitor peptides were shown to interact with 1-palmitoyl-2-oleyl-phosphatidylcholine (POPC) (liquid disordered, ld) and POPC/cholesterol (1:1) (POPC/Chol) (liquid ordered, lo) bilayers, and they do so to different extents. Although they both possess a tryptophan-rich domain (TRD), T-20 lacks a pocket binding domain (PBD), which is present in T-1249. It has been postulated that the PBD domain enhances FI interaction with HIV gp41 protein and with model membranes. Interaction of these fusion inhibitor peptides with both the cell membrane and the viral envelope membrane is important for function, i.e., inhibition of the fusion process. We address this problem with a molecular dynamics approach focusing on lipid properties, trying to ascertain the consequences and the differences in the interaction of T-20 and T-1249 with ld and lo model membranes. T-20 and T-1249 interactions with model membranes are shown to have measurable and different effects on bilayer structural and dynamical parameters. T-1249’s adsorption to the membrane surface has generally a stronger influence in the measured parameters. The presence of both binding domains in T-1249 appears to be paramount to its stronger interaction, and is shown to have a definite importance in membrane properties upon peptide adsorption.     

Identification of Oxidative Stress Related Proteins as Biomarkers for Lung Cancer and Chronic Obstructive Pulmonary Disease in Bronchoalveolar Lavage

Lung cancer (LC) and chronic obstructive pulmonary disease (COPD) commonly coexist in smokers, and the presence of COPD increases the risk of developing LC. Cigarette smoke causes oxidative stress and an inflammatory response in lung cells, which in turn may be involved in COPD and lung cancer development. The aim of this study was to identify differential proteomic profiles related to oxidative stress response that were potentially involved in these two pathological entities. Protein content was assessed in the bronchoalveolar lavage (BAL) of 60 patients classified in four groups: COPD, COPD and LC, LC, and control (neither COPD nor LC). Proteins were separated into spots by two dimensional polyacrylamide gel electrophoresis (2D-PAGE) and examined by matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF/TOF). A total of 16 oxidative stress regulatory proteins were differentially expressed in BAL samples from LC and/or COPD patients as compared with the control group. A distinct proteomic reactive oxygen species (ROS) protein signature emerged that characterized lung cancer and COPD. In conclusion, our findings highlight the role of the oxidative stress response proteins in the pathogenic pathways of both diseases, and provide new candidate biomarkers and predictive tools for LC and COPD diagnosis.     

Chemical composition and nutritional value of raw and fried allis shad (Alosa alosa)

The main objective of this study was to compare the proximate chemical composition and fatty acid profile of migrating allis shad (MS) and resident allis shad (RS) and to evaluate the nutritional value of fried migrating allis shad. No significant differences in the proximate chemical composition between males and females of each stock were obtained. However, MS fish had a significantly higher fat content than RS fish. The monounsaturated fatty acids group was the dominant in MS fish and oleic acid presented the highest percentage. Docosahexaenoic acid followed by eicosapentaenoic acid were the main PUFA in fish from both stocks. However, RS fish had higher total ω6 than MS fish due to its higher percentage of linoleic acid and arachidonic acid. Frying resulted in a significant reduction in water content and affected significantly the proximate chemical composition and the fatty acid profile, particularly the palmitic, oleic and linoleic acid.