Effect of heat treatment on precipitation behaviour and high temperature strength in a wrought Co-base superalloy

The effects of solution and ageing temperatures on the grain boundary reaction as well as on matrix precipitation in the interior of the grains were investigated using wrought Co-base superalloy HS-21. The grain boundary reaction occurred during furnace-cooling after solution-heating. The phase that precipitated in the grain boundary reactions nodule was M₂₃C₆ carbide. It also occurred during ageing after solution treatment, but the extent of it was considerably influenced by cooling procedure after solution heating. The activation energy of the grain boundary reaction was 244 kJ mol^–1 for the early stage of the grain boundary reaction in HS-21 alloy, and was considered to be the activation energy of grain boundary diffusion of chromium. The extent of the matrix precipitation that occurred during ageing was also influenced by the cooling procedure. Creep rupture tests were carried out at 1088 K in air. An excellent combination of long rupture life and large ductility was attained on a specimen, which involved both the grain boundary reaction nodules (about 7% in area fraction) and the matrix precipitates. The improvement of creep rupture properties results from the retardation of brittle intergranular fracture, which is achieved by grain boundary serration owing to the grain boundary reaction and by the increase of strength in the interior of grain due to the matrix precipitation.     

A DC-coupled wide dynamic range AGC amplifier IC for 560-Mbit/s optical transmission

A wide-band high-gain AGC amplifier stabilizing the output dc level against a broad gain variation is proposed and monolithically integrated using high-speed 1-μm Si-bipolar IC technology. The fabricated IC exhibits a maximum gain of 39 dB, gain dynamic range of 44 dB, bandwidth of 800 MHz, and output dc-level fluctuation of 8 mV, and realizes wide dynamic range and direct dc-coupling of the multistage AGC amplifier. Also, in order to examine the feasibility of the fabricated IC, a 1.5-μm-wavelength optical transmission experiment was carried out using DFB-LD and InGaAs-APD. Measured minimum received optical power for an error rate of 10^-9is -40 dBm at 560 Mbit/s and -38 dBm at 1.12 Gbit/s. Optical dynamic range of 30 dB is also achieved by using the fabricated IC and APD.     

Structure of effective catalyst layers around bubbles in a fluidized catalyst bed

In a fluidized catalyst bed, the reactant gas transfers from the bubble phase to the emulsion phase and reactions proceed in the emulsion phase. The catalyst particles around the bubbles should contact the gases containing a high concentration of the reactants. Therefore, the effect of the catalysts around the bubbles is very important for estimating the conversion and selectivity in the reactor. In order to study the role of these catalysts, the hydrogenation of carbon dioxide was carried out in a fluidized catalyst bed. Based on the results, the amount of the catalyst that was effective for the reaction was calculated. In addition, the shape of the bubbles ascending in the fluidized catalyst bed was observed using a fast X-ray computer tomography (CT) scanner. The structure of the bubbles in the fluidized catalyst bed was very complicated and the surface area of the bubbles was much greater than the obtained when assuming spherical shaped bubble. By assuming that effective catalysts existed around the bubbles, the thickness of catalyst layer was obtained. Finally, the 3-dimensional images of the catalyst layers around the bubbles were reconstructed.     

Cooking up an interactive olfactory game display.

It's long been possible to give users outside an actual environment that environment's visual and auditory information and thus contribute to establishing presence. However, we've yet to establish much presence when users require olfactory information - such as in environments focused on foods, flowers, perfumes, or, in some cases, more offensive smells. Recently, several VR researchers have become interested in olfaction and olfactory displays that present smells in virtual environments (VEs). In this article, we describe our interactive olfactory display. One of our development goals is to confirm the assumption that users' interactions with the system increases presence. Thus, we used our interactive olfactory display to develop a cooking game in collaboration with electronic engineers and artists.     

Agglomeration of magnesium oxide particles formed by the decomposition of magnesium hydroxide

The agglomeration process of MgO powder derived from Mg (OH)₂ was investigated at fixed temperatures of 600, 800, 900 and 1200° C; these temperatures were chosen as representative of four regions, i.e. below 600° C, 650 to 850° C, 850 to 1050°C and 1050 to 1200° C previously reported. At 600° C, coherent crystallites coalesced within the heating time of 60 min; on further heating till 300 min, the primary particles which consisted of crystallites grew rapidly. The original Mg (OH)₂ framework or pseudomorphs, composed of minute crystallites and primary particles, still remained in the powder. At 800° C, the pseudomorphs had disintegrated into fragments. The crystallite growth and primary particle growth were accelerated with increasing the heating times beyond 60 min. At 900° C, a further fragmentation of agglomerates occurred with increasing the heating times; the crystallite and primary particle growth in fragments brought about the pore coalescence. At 1200° C, the crystallite and primary particle growth proceeded with the coarsening of pores; on heating beyond 240 min, the crystallites and primary particles grew rapidly due to the entrapment of pores within them.     

Effect of geometry and dielectric material on thermo-mechanical strain on micro-vias in build-up substrates

Build-up substrates have been preferable solutions for small and high performance systems for more than a few decades. Micro-vias need to be smaller to realize ever higher wiring density in build-up substrates, but there has been concern on the reliability. This paper focuses on Cu filled micro-vias of 25 μm in diameter and investigates the strain on micro-vias using a finite element method for varying geometric parameters and material properties. The strain becomes smaller with shrinking micro-vias, and a prediction equation for the strain is developed as a function of the aspect ratio and material properties for both single and stacked micro-vias.     

Feature extraction by supervised independent component analysis based on category information

Independent component analysis (ICA) is a technique of transforming observation signals into their unknown independent components; hence, ICA has often been applied to blind signal separation problems. In this application, it is expected that the obtained independent components extract essential information of independent signal sources from input data in an unsupervised fashion. Based on such characteristics, ICA is currently utilized as a feature extraction method for images and sounds for recognition purposes. However, since ICA is an unsupervised learning, the obtained independent components are not always useful in recognition. To overcome this problem, we propose a supervised approach to ICA using category information. The proposed method is implemented in a conventional three‐layered neural network, but its objective function to be minimized is defined not only for the output layer but also for the hidden layer. The objective function consists of the following two terms: one evaluates the kurtosis of hidden unit outputs and the other evaluates the error between output signals and their teacher signals. The experiments are performed using several standard datasets to evaluate performance of the proposed algorithm. It is confirmed that a higher recognition accuracy is attained by the proposed method as compared with a conventional ICA algorithm. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 161(2): 25–32, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20522     

Syntactic priming in comprehension: The role of argument order and animacy.

Two visual-world eye-movement experiments investigated the nature of syntactic priming during comprehension--specifically, whether the priming effects in ditransitive prepositional object (PO) and double object (DO) structures (e.g., "The wizard will send the poison to the prince/the prince the poison?") are due to anticipation of structural properties following the verb (send) in the target sentence or to anticipation of animacy properties of the first postverbal noun. Shortly following the target verb onset, listeners looked at the recipient more (relative to the theme) following DO than PO primes, indicating that the structure of the prime affected listeners' eye gazes on the target scene. Crucially, this priming effect was the same irrespective of whether the postverbal nouns in the prime sentences did ("The monarch will send the painting to the president") or did not ("The monarch will send the envoy to the president") differ in animacy, suggesting that PO/DO priming in comprehension occurs because structural properties, rather than animacy features, are being primed when people process the ditransitive target verb. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Sinterability of various high-purity magnesium oxide powders

The sinterability of high-purity MgO powders with different production histories was investigated to make clear the relationship between the powder characterization, the densification processes, and the changes in microstructure both with increasing temperature at a rate of 10° C min^–1 and at a fixed temperature of 1450° C for 5 h. The densification behaviour and the changes in microstructure of these compressed bodies were affected chiefly by their original surface activity and degree of agglomeration, depending on the production histories: (i) the ultra-fine and well-dispersed powder prepared by the vapour-phase oxidation process showed that densification proceeded with an appreciable grain growth with few closed pores remaining; (ii) powder derived from the sea-water magnesia process showed that the densification behaviour was affected by the species of magnesium salt, i.e. basic magnesium carbonate or magnesium hydroxide, used as a precursor; however, whichever magnesium salt was used, its sintered compact showed similar closed porosities and grain-size distributions; (iii) powder derived from the spark-discharge process contained skeletons of the original Mg(OH)₂ particles; however, the densification proceeded gradually with slow grain growth, reflecting the fact that the powder has a moderate surface area (36 m² g^–1). The sintered compact from (iii) had a small closed porosity and the smallest grain-size distribution among the compacts used in this investigation.