Effect of geometry and dielectric material on thermo-mechanical strain on micro-vias in build-up substrates

Build-up substrates have been preferable solutions for small and high performance systems for more than a few decades. Micro-vias need to be smaller to realize ever higher wiring density in build-up substrates, but there has been concern on the reliability. This paper focuses on Cu filled micro-vias of 25 μm in diameter and investigates the strain on micro-vias using a finite element method for varying geometric parameters and material properties. The strain becomes smaller with shrinking micro-vias, and a prediction equation for the strain is developed as a function of the aspect ratio and material properties for both single and stacked micro-vias.     

Feature extraction by supervised independent component analysis based on category information

Independent component analysis (ICA) is a technique of transforming observation signals into their unknown independent components; hence, ICA has often been applied to blind signal separation problems. In this application, it is expected that the obtained independent components extract essential information of independent signal sources from input data in an unsupervised fashion. Based on such characteristics, ICA is currently utilized as a feature extraction method for images and sounds for recognition purposes. However, since ICA is an unsupervised learning, the obtained independent components are not always useful in recognition. To overcome this problem, we propose a supervised approach to ICA using category information. The proposed method is implemented in a conventional three‐layered neural network, but its objective function to be minimized is defined not only for the output layer but also for the hidden layer. The objective function consists of the following two terms: one evaluates the kurtosis of hidden unit outputs and the other evaluates the error between output signals and their teacher signals. The experiments are performed using several standard datasets to evaluate performance of the proposed algorithm. It is confirmed that a higher recognition accuracy is attained by the proposed method as compared with a conventional ICA algorithm. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 161(2): 25–32, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20522     

Syntactic priming in comprehension: The role of argument order and animacy.

Two visual-world eye-movement experiments investigated the nature of syntactic priming during comprehension--specifically, whether the priming effects in ditransitive prepositional object (PO) and double object (DO) structures (e.g., "The wizard will send the poison to the prince/the prince the poison?") are due to anticipation of structural properties following the verb (send) in the target sentence or to anticipation of animacy properties of the first postverbal noun. Shortly following the target verb onset, listeners looked at the recipient more (relative to the theme) following DO than PO primes, indicating that the structure of the prime affected listeners' eye gazes on the target scene. Crucially, this priming effect was the same irrespective of whether the postverbal nouns in the prime sentences did ("The monarch will send the painting to the president") or did not ("The monarch will send the envoy to the president") differ in animacy, suggesting that PO/DO priming in comprehension occurs because structural properties, rather than animacy features, are being primed when people process the ditransitive target verb. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Sinterability of various high-purity magnesium oxide powders

The sinterability of high-purity MgO powders with different production histories was investigated to make clear the relationship between the powder characterization, the densification processes, and the changes in microstructure both with increasing temperature at a rate of 10° C min^–1 and at a fixed temperature of 1450° C for 5 h. The densification behaviour and the changes in microstructure of these compressed bodies were affected chiefly by their original surface activity and degree of agglomeration, depending on the production histories: (i) the ultra-fine and well-dispersed powder prepared by the vapour-phase oxidation process showed that densification proceeded with an appreciable grain growth with few closed pores remaining; (ii) powder derived from the sea-water magnesia process showed that the densification behaviour was affected by the species of magnesium salt, i.e. basic magnesium carbonate or magnesium hydroxide, used as a precursor; however, whichever magnesium salt was used, its sintered compact showed similar closed porosities and grain-size distributions; (iii) powder derived from the spark-discharge process contained skeletons of the original Mg(OH)₂ particles; however, the densification proceeded gradually with slow grain growth, reflecting the fact that the powder has a moderate surface area (36 m² g^–1). The sintered compact from (iii) had a small closed porosity and the smallest grain-size distribution among the compacts used in this investigation.     

Effect of voluntary exercise on maximal oxygen uptake in young female Fischer 344 rats

The effect of voluntary exercise on maximal oxygen uptake (VO2 max) was studied in young female Fischer 344 rats. After 10 weeks of wheel-running training, the absolute VO2 max and VO2 max relative to body mass increased without a decline in body mass. The running speed eliciting VO2 max, heart and soleus muscle mass, and succinate dehydrogenase (SDH) activity in the soleus muscle also increased. These results suggest that voluntary exercise is an effective means of increasing the aerobic exercise capacity of young female Fischer 344 rats.     

Selective sorption of heavy metal thiocyanate complexes on crown ether resin

The sorption behavior of heavy metal thiocyanate complexes was investigated for dibenzo-18-crown-6 (DB18C6) resin and bis[2-(o-methoxyphenoxy)ethyl]ether (BMPE) resin. The DB18C6 resin showed a high sorption ability and the degree of zinc sorption increased significantly with thiocyanate concentration. This behavior was not observed for BMPE resin. The sorption behavior was influenced by the countercation species, and the degree of sorption of zinc ions showed the maximum when the potassium thiocyanate was used as a complexing salt. The sorbed species appear to be KZn(SCN)₃, K₂Zn(SCN)₄ in the potassium thiocyanate system, and Zn(SCN)₂ in the lithium thiocyanate system, respectively, according to analysis of the sorption equilibrium. Sodium and ammonium thiocyanate systems show an intermediate behavior of the two. The sorption selectivity for DB18C6 resin depended not only on the hydrophobic nature of heavy metal thiocyanate complexes but also on the stabilization of counter cation species with crown ether matrix, and the sorption selectively was found to be effectively controlled by countercation species according to the cation-chelation mechanism.     

Development of an indoor navigation system for a monocular-vision-based autonomous mobile robot

We have developed a technology for a robot that uses an indoor navigation system based on visual methods to provide the required autonomy. For robots to run autonomously, it is extremely important that they are able to recognize the surrounding environment and their current location. Because it was not necessary to use plural external world sensors, we built a navigation system in our test environment that reduced the burden of information processing mainly by using sight information from a monocular camera. In addition, we used only natural landmarks such as walls, because we assumed that the environment was a human one. In this article we discuss and explain two modules: a self-position recognition system and an obstacle recognition system. In both systems, the recognition is based on image processing of the sight information provided by the robot’s camera. In addition, in order to provide autonomy for the robot, we use an encoder and information from a two-dimensional space map given beforehand. Here, we explain the navigation system that integrates these two modules. We applied this system to a robot in an indoor environment and evaluated its performance, and in a discussion of our experimental results we consider the resulting problems.     

Study on new GMA welding process with duplex current feeding

Gas metal arc welding (GMAW) under pure argon shielding gas atmosphere (pure argon-GMAW) is suitable to obtain a high-strength and high toughness welded joint. However, it is difficult that pure argon-GMA welding is applied practically welding structure because of arc instability. In order to perform stable pure argon-GMA welding, duplex current feeding GMAW (DCF-GMAW) has been developed. The DCF-GMAW consists of primary GMA welding current and secondary welding current by constant-current power resource. DFC-GMAW can feed larger current near wire tip. This effect makes that weld penetration depth is deeper, weld bead shape is improved using DCF-GMAW.     

Correction: patil, a. Et Al. Hub promiscuity in protein-protein interaction networks. Int. J. Mol. Sci. 2010, 11, 1930-1943

[This corrects the article on p. 1930 in vol. 11, PMID: 20480050.].     

Effect of microstructures on dielectric breakdown strength of sintered reaction-bonded silicon nitride ceramics

Silicon nitride (Si₃N₄) was prepared from silicon by a sintered reaction-bonded silicon nitride method using yttria and magnesia as sintering additives. Post-sintering (PS) of nitrided compacts was carried out at 1850°C under a nitrogen pressure of 1 MPa. Effect of PS time on microstructure and dielectric breakdown strength (DBS) of the prepared Si₃N₄ ceramics was evaluated. The DBS was measured using specimens with four different thicknesses (0.30, 0.20, 0.10, and 0.05 mm) in order to examine the thickness dependence. The porosity of the sintered Si₃N₄ decreased by prolonging the PS time, and the full density could be achieved at the PS time of over 6 h. After full densification, rod-like β-Si₃N₄ grains grew up, and their maximum grain size increased from 45.1 to 154.7 μm by prolonging the PS time from 6 to 48 h. The DBS of the thick Si₃N₄ substrates (0.30 mm) showed little variation from 35.4 to 47.0 kV/mm, regardless of the PS time. On the other hand, that of the thin ones (0.05 mm) dramatically decreased from 99.5 to 9.8 kV/mm with increased the PS time from 6 to 48 h. Because the DBS sharply decreased at the thin substrate sintered for longer time in which some large-elongated grains might span the substrate thickness-wise throughout, it was inferred that the interface between β-Si₃N₄ grains and grain boundary phase/intergranular glassy films might be a path of the dielectric breakdown.