Analytical modeling of the elastic structural response of tubes to internal detonation loading

The internal detonation loading of cylindrical shells involves loads that propagate at high speeds. Since the speed of the gaseous detonation can be comparable to the flexural-wave-group speed, the excitations of flexural waves in the tube wall become significant. Flexural waves can result in high strains, which may exceed the equivalent static strains (caused by the same nominal loading pressure) by up to a factor of 4. This paper presents a new analytical model for the transient elastodynamic structural response of cylindrical shells with finite length to internal detonation loading. It is shown that, due to the consideration of the effects of transverse shear and rotary inertia, the predictions of dynamic structural response of tubes provided by this model are in better agreement with the experimental results, than existing analytical models. The model is verified through comparison with experimental results reported in the literature.     

Two-Step Sintering of Nanocrystalline ZnO Compacts: Effect of Temperature on Densification and Grain Growth

Two-step sintering (TSS) was applied on nanocrystalline zinc oxide (ZnO) to control the accelerated grain growth occurring during the final stage of sintering. The grain size of a high-density (>98%) ZnO compact produced by the TSS was smaller than 1 μm, while the grain size of those formed by the conventional sintering method was ∼4 μm. The results showed that the temperature of both sintering steps plays a significant role in densification and grain growth of the nanocrystalline ZnO compacts. Several TSS regimes were analyzed. Based on the results obtained, the optimum regime consisted of heating at 800°C (step 1) and 750°C (step 2), resulting in the formation of a structure containing submicrometer grains (0.68 μm). Heating at 850°C (step 1) and then at 750°C (step 2) resulted in densification and grain growth similar to the conventional sintering process. Lower temperatures, e.g., 800°C (step 1) and 700°C (step 2), resulted in exhaustion of the densification at a relative density of 86%, above which the grains continued to grow. Thermogravimetric analysis results were used to propose a mechanism for sintering of the samples with transmission electron micrographs showing the junctions that pin the boundaries of growing grains and the triple-point drags that result in the grain-boundary curvature.     

Urea impregnated multiwalled carbon nanotubes; a formaldehyde scavenger for urea formaldehyde adhesives and medium density fiberboards bonded with them

Multiwalled carbon nanotubes (MWCNTs) were subjected to modification by urea to use as formaldehyde scavenger in urea formaldehyde (UF) adhesive and reducing the free formaldehyde emission of the medium density fiberboards (MDFs). Morphological differences besides elemental analysis was investigated using field emission scanning electron microscopy (FESEM) and energy dispersive X-ray spectroscopy. The effect of urea impregnated MWCNTs filler on the physical, morphological and thermal properties of the UF resin has investigated. Furthermore, characterization of the mechanical properties, free formaldehyde emission and thickness swelling were carried out for the MDF panels. From the results, the free formaldehyde of the UF resins was significantly decreased. The lowest free formaldehyde was belonged to the sample with 3 wt% of scavenger which was about 71% lower than the value for neat UF resin. Accordingly, the formaldehyde emission of the fiberboards was also showed a descending trend by incorporation of MWCNTs-U to the composite structure. It was decreased from 9.67 to 3.89 mg/100 g dried board. These results indicated that the prepared nano modifier was successfully performed as a formaldehyde scavenger for the UF resin and could prevent the hazards of the free formaldehyde emission from MDF panels.     

Aflatoxin B1 degradation by Bacillus subtilis UTBSP1 isolated from pistachio nuts of Iran

Pistachio nuts are among the commodities with the highest risk of aflatoxin contamination in Iran. Aflatoxin B1 (AFB1) is one of the most hazardous mycotoxins for humans and livestock. In nature, there are microorganisms which are capable of reducing aflatoxins contamination in food and feed products. In this study, Bacillus subtilis strain UTBSP1 was isolated from pistachio nuts and studied for the degradation of AFB1. The AFB1 contents were determined by the use of HPTLC and HPLC as well as multiple reactions monitoring (MRM) method in LC-MS/MS. The results indicated B. subtilis UTBSP1 could considerably remediate AFB1 from nutrient broth culture and pistachio nut by 85.66% and 95%, respectively. Cell free supernatant fluid caused an apparent 78.39% decrease in AFB1 content. The optimal conditions for AFB1 degradation by cell free supernatant appeared at 35-40 °C, during 24 h. Furthermore, the results indicated that AFB1 degradation is enzymatic and responsible enzymes are extracellular and constitutively produced. The destructive AFB1 differed from standard AFB1 chemically, and lost a fluorescence property.     

MR imaging of the prostate in clinical practice

Magnetic resonance imaging (MRI) is the imaging tool of choice in the evaluation of prostate cancer. The main applications of MR imaging in the management of prostate cancer are: (1) to guide targeted biopsy when prostate cancer is clinically suspected and previous ultrasound-guided biopsy results are negative; (2) to localize and stage prostate cancer and provide a roadmap for treatment planning; and (3) to detect residual or locally recurrent cancer after treatment. Other MR techniques such as proton MR spectroscopic imaging (MRSI), diffusion-weighted imaging (DWI), and contrast-enhanced MRI (CE-MRI) complement conventional MR imaging by providing metabolic and functional information that can improve the accuracy of prostate cancer detection and characterization. In everyday clinical practice, and to account for patient comfort, MR imaging studies are limited to 1 h. To obtain consistently high-quality images, a well-designed protocol is necessary. Routine MR imaging can be supplemented by other MR techniques such as MRSI, DWI or CE-MRI depending on the expertise available and the clinical questions that need to be answered. This review summarizes the role of MR imaging in the management of prostate cancer and describes practical approaches to implementing anatomic, metabolic and functional MR imaging techniques in the clinic.     

Assessment of beverages made from milk,soya milk and whey using Iranian kefir starter culture

Kefir starter culture was used for the production of beverages, and some chemical and microbiological parameter changes were determined during 24 h of fermentation and then after 2, 7, 14, 21 and 28 days of storage at 4 °C. Three different substrates (milk, whey and soya milk) were used as fermentation media for the kefir starter culture. After the fermentation, the carbohydrate content and pH decreased, but the dry matter and fat content of the beverages were not significantly different from their substrates. During storage, lactic acid bacteria in the beverages decreased, while yeasts increased and carbohydrate, ethanol and pH changed significantly in the three beverages.     

Evaluation of maxillary dental arch form in unilateral clefts of lip, alveolus, and palate from one month to four years

This study evaluated the early changes of maxillary alveolar arches of operated unilateral cleft lip and palate patients. Dental casts were available at four age increments. Triangular flap cheiloplasty was carried out at an early age. Two-stage palatoplasty by vomer flap and soft palate closure took place later. Prior to lip repair, the alveolar arches were classified according to the relationship between greater and lesser segments. Almost a quarter had overlap of the alveolar segments with no contact between the alveolar ridges at the cleft site; some had no overlap with contact of the alveolar segments in the cleft region; almost a quarter had both overlap of the alveolar segments and contact; and almost half had no overlap of the segments and the alveolar ridges were not in contact at the cleft site. After lip repair, the arch relationships were examined and the percentage of patients in each of the four groups indicated a moulding effect of lip repair on the alveolar segments. This moulding effect caused the alveolar segments in most patients to be in contact at the cleft site. Most of these also had segment overlap. All patients were re-examined shortly after palatal repair. The trend for segment overlap and contact continued after palate surgery. However, when all patients were seen at age 4, percentages of patients in each group indicated that previous overlap of segments improved to a more desirable nonoverlapped relationship in approximately half of the patients. The other half continued to demonstrate arch collapse, in excess of what would be considered ideal ridge relationship.     

Entropy minimization in turbine cascade using continuous adjoint formulation

A complete continuous adjoint formulation is presented here for the optimization of the turbulent flow entropy generation rate through a turbine cascade. The adjoint method allows one to have many design variables, but still afford to compute the objective function gradient. The new adjoint system can be applied to different structured and unstructured grids as well as mixed subsonic and supersonic flows. For turbulent flow simulation, the k–ω shear-stress transport turbulence model and Roe's flux function are used. To ensure all possible shape models, a mesh-point method is used for design parameters, and an implicit smoothing function is implemented to avoid the generation of non-smoothed blades. To analyse the capability of the presented algorithm, the shape of a turbine cascade blade is redesigned and a few physical observations are made on how the scheme improves the blade performance.     

Investigating the restoration of Lake Urmia using a numerical modelling approach

We assessed the effectiveness of multiple hydrologic restoration scenarios for Lake Urmia, as well as the variation of its salinity regime under no intervention, using a 2D shallow water model. Tested scenarios, proposed by Urmia Lake Restoration Program Committee, include: Preservation of current lake status (no intervention), complete closing of Shahid Kalantari causeway, dyke construction in the southern part of Lake Urmia, water transfer from Zarrinehrood River to Siminehrood River and reduction of agricultural water consumption by best agricultural practices. Results indicate that neither the closure of the causeway nor the construction of the southern dyke would significantly improve lake conditions when compared to preservation of current lake status. The water transfer alternative doesn’t seem to have any effect on the current lake conditions either. However, the reduction on water diversions by improving agricultural practices in the lake's basin leads to a partial restoration of the lake in terms of water level, surface area and volume. If current conditions persist, salinity in the northern part of Lake Urmia will reach supersaturation levels (340?g/L), generating further salt deposits.