Optical properties of amorphous carbon thin films prepared by plasma deposition in a graphite hollow cathode

Carbon films have been produced using a graphite hollow cathode and an r.f. plasma of hydrogen or hydrogen and argon. No hydrocarbon gas was used. The films were subjected to heat treatments up to 700 °C in air. The optical properties of the films were studied using Fourier transform IR, UV-visible, Raman, ellipsometry and photoluminescence techniques before and after the annealing. Films prepared without argon have a narrower band gap and a different photoluminescence response from films prepared with argon. The index of refraction was seen to have values between 1.7 and 2.2 depending on the preparation conditions. The optical band gap of the films was generally greater than 2 eV and the annealing process both increased the gap and reduced the density of states responsible for the large photoluminescence signal.     

Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

The BsmI vitamin D receptor restriction fragment length polymorphism (bb) influences the effect of calcium intake on bone mineral density

Previous studies of the vitamin D receptor (VDR) polymorphisms and bone mineral density (BMD) have suggested that there may be differences in calcium absorption among groups of women with different VDR genotypes, and that the association may be stronger in younger women. To investigate the association between the VDR polymorphisms and BMD, this study was undertaken in the Framingham Study Cohort and a group of younger volunteers. Subjects from the Framingham Study (ages 69-90 years) included those who underwent BMD testing and who had genotyping for the VDR alleles (n = 328) using polymerase chain reaction methods and restriction fragment length polymorphisms with BsmI (B absence, b presence of cut site). A group of younger volunteer subjects (ages 18-68) also underwent BMD testing and VDR genotyping (n = 94). In Framingham Cohort subjects with the bb genotype, but not the Bb or BB genotypes, there were significant associations between calcium intake and BMD at five of six skeletal sites, such that BMD was 7-12% higher in those with dietary calcium intakes greater than 800 mg/day compared with those with intakes < 500 mg/day. The data also suggested that BMD was higher in persons with the bb genotype only in the group with calcium intakes above 800 mg/day. No significant differences were found in the Framingham Cohort for age-, sex-, and weight-adjusted BMD at any skeletal site between those with the BB genotype and those with the bb genotype regardless of 25-hydroxyvitamin D levels or country of origin. In the younger volunteers, BMD of the femoral neck was 5.4% higher (p < 0.05) in the bb genotype group compared with the BB group and 11% higher (p < 0.05) in males with the bb genotype compared with the BB group. There were no significant differences at the lumbar spine. In this study, the association between calcium intake and BMD appeared to be dependent upon VDR genotype. The findings of an association between dietary calcium intake and BMD only in the bb genotype group suggests that the VDR genotype may play a role in the absorption of dietary calcium. Studies that do not consider calcium intake may not detect associations between VDR genotype and BMD. In addition, the association between VDR alleles and BMD may become less evident in older subjects.     

Substance use escalation and substance use restraint among adolescent children of alcoholics.

Assessed the escalations in substance use over 3 yrs among 246 adolescent children of alcoholics (COAs) and 208 controls (aged 10.5–15.5 yrs). Older COAs showed the steepest escalations in drug use. Younger COAs whose fathers had continuing alcohol-related consequences showed the greatest escalations in alcohol use. Ss' beliefs about drinking restraint were related to their alcohol and drug use. Those whose alcoholic fathers had no continuing alcohol-related consequences showed the strongest relations between substance use and self-control reasons for limiting drinking, perceived risk for future drug problems, and seeing the negative effects of alcohol on someone else. These adolescents may be deterred from substance use escalations because of particular parental characteristics (e.g., mild forms of paternal alcoholism) or because of their beliefs about substance use. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Infant leukaemia biology, aetiology and treatment

A method for the determination of aspartame (N-L-alpha-aspartyl-L-phenylalanine methyl ester) and its metabolites, applicable on a routine quality assurance basis, is described. Liquid samples (diet Coke, 7-Up, Pepsi, etc.) were injected directly onto a mini-cartridge reversed-phase column on a high-performance liquid chromatographic system, whereas solid samples (Equal, hot chocolate powder, pudding, etc.) were extracted with water. Optimising chromatographic conditions resulted in resolved components of interest within 12 min. The by-products were confirmed by mass spectrometry. Although the method was developed on a two-pump HPLC system fitted with a diode-array detector, it is straightforward and can be transformed to the simplest HPLC configuration. Using a single-piston pump (with damper), a fixed-wavelength detector and a recorder/integrator, the degradation of products can be monitored as they decompose. The results obtained were in harmony with previously reported tedious methods. The method is simple, rapid, quantitative and does not involve complex, hazardous or toxic chemistry.     

Measuring the errors of form of industrial surfaces: prediction and optimization

To acquire maximum information on the geometrical errors of industrially made surfaces at a minimum cost, a method for estimating conditional probabilities of a random signal (Bayesian prediction) is applied to three-dimensional metrology. First, a surface is interpolated between data acquired on a coordinate measuring machine (CMM). Then, for a given probability, limit surfaces are computed that bind a region of space containing the known data and the most probable interpolation of the missing data of the surface. These bounds can be treated as the surface; their points can be considered as if they were actual CMM data when fitting a tolerance zone or a datum feature to the data. For Bayesian prediction, the basic hypotheses on the signal are stationarity, ergodicity, and gaussian density. Deviations from these hypotheses and their consequences on the prediction are taken into account and corrections are proposed.     

Disposition of phenol in rat after oral, dermal, intravenous, and intratracheal administration

The absorption and elimination of [14C]-phenol (63.5 nmol) after oral, dermal, intratracheal, or intravenous administration in rat was rapid and extensive. Urinary elimination of radioactivity predominated, with a range of 75-95% of the dose detected in urine by 72 h post-exposure. Washing the dermal site 72 h post-exposure removed 14% of the dose. Two per cent of the dose was detected in the skin. The urinary metabolites at 4 and 8 h after administration by the four routes included phenyl sulphate and lower amounts of phenyl glucuronide. Phenol was poorly retained in the body after administration by the four routes. Phenol remaining in the body was widely distributed, with accumulation primarily in the liver, lung, and kidney.     

Renal osteodystrophy in diabetic patients

To assess the effects of diabetes mellitus on renal osteodystrophy, we examined the database of 256 patients (45% on hemodialysis and 55% on peritoneal dialysis) who were prospectively studied in three Toronto dialysis centers between October of 1987 and 1989. All patients had serial documentation of their clinical, laboratory and risk parameters of bone disease, and completed a series of investigations that included the deferoxamine test, measurement of intact 1-84 PTH levels, and an iliac crest bone biopsy. Twenty-five percent of these patients were diabetic. When compared to non-diabetic patients, they were on dialysis for a shorter duration (2.4 +/- 0.3 vs. 4.7 +/- 0.3 years; P < 0.0002), used calcium carbonate as the only phosphate binder more frequently (40 vs. 25%; P < 0.007), and had lower parathyroid hormone levels (12 +/- 1.4 vs. 24 +/- 2.3 pmol/liter; P < 0.002). High-turnover bone disorders (that is, osteitis fibrosa and mixed disorder) were distinctly uncommon (8 vs. 33%; P < 0.01 by Fisher's exact test), while the mild (19 vs. 9%; P = NS) and the aplastic disorders (with mean stainable bone surface aluminum of 6.5 +/- 0.7%) (46 vs. 31%; P = NS) tended to be more common in diabetic patients. The prevalence of aluminum bone disease was the same in both groups (27%). Diabetic patients ingested a smaller cumulative dose of aluminum gels (3.7 +/- 0.6 vs. 9.3 +/- 1.1 kg; P < 0.005), yet had a higher rate of aluminium accumulation on bone surfaces than non-diabetic patients (1.5 +/- 0.19 vs. 0.96 +/- 0.10% per month on dialysis; P < 0.015).(ABSTRACT TRUNCATED AT 250 WORDS)     

Design of an isolated pig heart preparation for positron emission tomography and magnetic resonance imaging

RATIONALE AND OBJECTIVES: Validation of new positron emission tomography (PET) tracers or magnetic (MR) imaging contrast agents is based on isolated rodent heart preparations. The use of larger animals could provide a more direct validation using the devices used for humans. METHODS: An isolated pig heart preparation has been developed and adapted to the technical constraints of whole body PET and MR imaging. This preparation could be used either in the Langendorff or working mode after selective cannulation of both coronary arteries. RESULTS: The authors showed that quantification of regional kinetics of PET tracers was possible using this preparation by measuring fluorine-18-labeled deoxyglycose (18FDG) kinetics in remote and ischemic territories. Experiments using MR imaging contrast agents, for myocardial perfusion, demonstrated the ability of this preparation to accurately validate these contrast agents over a wide range of flow rates. CONCLUSIONS: An isolated pig heart preparation could be developed to fulfill the constraints of PET and MR imaging, and proved useful for the study of the distribution of different tracers or contrast media developed for functional cardiac imaging in humans.