Preparation and properties of polyimide/silica hybrid composites based on polymer‐modified colloidal silica

A new type of polyimide/silica (PI/SiO₂) hybrid composite films was prepared by blending polymer‐modified colloidal silica with the semiflexible polyimide. Polyimide was solution‐imidized at higher temperature than the glass transition temperature (T_g) using 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA) and 4,4′‐diaminodiphenyl ether (ODA). The morphological observation on the prepared hybrid films by scanning electron microscopy (SEM) pointed to the existence of miscible organic–inorganic phase, which resulted in improved mechanical properties compared with pure PI. The incorporation of the silica structures in the PI matrix also increased both T_g and thermal stability of the resulting films. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2053–2061, 2006     

Synthesis and biological activity of phthalimide‐based polymers containing 5‐fluorouracil

The attachment of anticancer agents to polymers is a promising approach towards reducing the toxic side‐effects and retaining the potent antitumour activity of these agents. A new tetrahydrophthalimido monomer containing 5‐fluorouracil (ETPFU) and its homopolymer and copolymers with acrylic acid (AA) and with vinyl acetate (VAc) have been synthesized and spectroscopically characterized. The ETPFU contents in poly(ETPFU‐co‐AA) and poly(ETPFU‐co‐VAc) obtained by elemental analysis were 21 mol% and 20 mol%, respectively. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 8900 g mol^?1, M_w = 13 300 g mol^?1, M_w/M_n = 1.5 for poly(ETPFU); M_n = 13 500 g mol^?1, M_w = 16 600 g mol^?1, M_w/M_n = 1.2 for poly(ETPFU‐co‐AA); M_n = 8300 g mol^?1, M_w = 11 600 g mol^?1, M_w/M_n = 1.4 poly(ETPFU‐co‐VAc). The in vitro cytotoxicity of the compounds against FM3A and U937 cancer cell lines increased in the following order: ETPFU > 5‐FU > poly(ETPFU) > poly(ETPFU‐co‐AA) > poly(ETPFU‐co‐VAc). The in vivo antitumour activities of all the polymers in Balb/C mice bearing the sarcoma 180 tumour cell line were greater than those of 5‐FU and monomer at the highest dose (800 mg kg^?1). © 2002 Society of Chemical Industry     

校园网防御体系解决方案

如何发挥现有网络设备的最佳功效,从而有效地提高现有网络的利用率,是校园网目前急需解决的问题。本文从探究如何建设高效安全的校园网,让校园网更好的为教育和科研服务为出发点,较好地阐述了目前校园网防御体系存在的问题,并提出了解决问题的措施。     

耐温抗冲防腐蚀涂料的研制

以环氧丙烯酸酯与呋喃胺/环氧树脂的互穿聚合物网络(IPN)为基料,制备了耐温、抗冲击性能优良的防腐蚀涂料。讨论了环氧丙烯酸酯的用量对涂料各种性能的影响。试验表明,环氧丙烯酸酯的用量为30%,采用E-51环氧树脂与呋喃胺树脂配合时,漆膜的综合性能较优。     

A water‐developable negative photoresist based on the photocrosslinking of N‐phenylamide groups with reduced environmental impact

A water‐developable negative photoresist based on the photocrosslinking of N‐phenylamide groups was prepared by the copolymerization of 4‐styrenesulfonic acid sodium salts (SSS) with N‐phenylmethacrylamide (copolymer A) or p‐hydroxy‐N‐phenylmethacrylamide (copolymer B), and its properties such as solubility changes, photochemical reaction, and photoresist characteristics were studied. The copolymer containing a relatively higher amount of SSS units was soluble in water. Solubility changes of the copolymers in the various buffer solutions of pH 4 ～ 11 and in water upon irradiation were observed by the measurement of insoluble fraction. The copolymers were soluble in water before irradiation, whereas they became insoluble upon irradiation with the UV light of 254 nm. The photochemical reaction of the copolymer studied by the UV and IR absorption spectroscopies indicated that a photo‐Fries rearrangement was favored for copolymer A, whereas a photocrosslinking reaction was predominate for copolymer B. Resist properties of the copolymers were studied by measurement of the normalized thickness and by development of the micropattern. Negative tone images with a resolution of 1 μm were obtained with these materials that have a sensitivity (D) of ～ 1100 mJ/cm² with an aqueous developing process.© 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1172–1180, 2002     

Enhanced surface morphologies of screen-printed carbon nanotube films by heat treatment and their field-emission properties

A heating process for obtaining free-standing carbon nanotube emitters is presented with the aim of improving field-emission properties from the screen-printed multiwalled carbon nanotube (MWCNT) films. Using an atmosphere with an optimum combination of nitrogen and air for heat treatment of CNT films, the CNT emitters can be made to protrude from the surface. This allows for a high emission current and the formation of very uniform emission sites without special surface treatment. The morphological change of the CNT film by this technique has eliminated additional processing steps, such as surface treatment which may result in secondary contamination and damage to the film. Despite its simplicity the process provides a high reproducibility in emission current density which makes the films suitable for practical applications.     

P(SBR/NR/HAF)并用胶的性能

在SBR胶乳／NR胶乳共混的基础上，采用凝聚共沉法制备高耐磨炭黑（HAF）填充型粉末丁苯橡胶／天然橡胶并用胶[P(SBR/NR/HAF)]。研究了SBR／NR并用比、制备工艺等对P（SBR／NR／HAF）并用胶的混沌流变性能和物理机械性能的影响，并与块状SBR／NR／HAF并用胶进行了比较。研究表明，与SBR／NR／HAF相比，P（SBR／NR／HAF）的表观剪切粘度在SBR用量小于50份时对混炼时间的依赖性较低，而在SBR用量大于50份后对混炼时间具有更高的依赖性；P（SBR／NR／HAF)硫化胶 拉伸强度在整个并用范围内对SBR／NR并和比不敏感；采用胶乳预混合的工艺制备的P（SBR／NR／HAF）具有较好的物理机械性能。     

复合改性纳米碳酸钙/CPE对PVC的协同增韧增强

用改性剂在水相中对纳米碳酸钙进行表面改性,样品烘干后在捏合机中用固相法采用自制的表面改性剂对水相法改性的纳米碳酸钙进一步进行包覆改性;制备了一种具有反应活性的新型改性纳米碳酸钙(R-CaCO3),并对R- CaCO3进行表征。结果表明,R-CaCO3亲油性增加,在液体石蜡中分散性改善,改性剂与碳酸钙之间形成化学吸附; 同时制备了PVC／CPE／R-CaCO3]纳米复合材料,发现R-CaCO3与CPE对PVC有明显的协同增韧增强作用,同时还提高了体系的耐热性,且体系的黏度基本不变。     

A new characterization procedure for aqufous solutions with unknown composition

A new characterization procedure for aqueous solutions with unknown composition was proposed based on the binomial distribution of TOC (total organic carbon) fraction in terms of a characterizing variable, the Freundlich coefficient, k, so that the solution in question can be described by a finite number of pseudo.species identified with a certain k value. The validity and computational accuracy of this procedure has been demonstrated by characterizing three sets of experimental data chosen from different sources. Predictions based on this procedure yielded acceptable results that agreed closely with experimental data.