The Ultrawideband Leaky Lens Antenna

A novel directive and nondispersive antenna is presented: the ultrawideband (UWB) leaky lens. It is based on the broad band Cherenkov radiation occurring at a slot printed between different infinite homogeneous dielectrics. The first part of the paper presents the antenna concept and the UWB design. The issues that are specifically addressed include the impedance matching, the radiation pattern and the phase purity. Subsequently the hardware demonstrator and the results of the measurement campaign are shown. The results fully validate the antenna concept. The antenna presents decade bandwidth impedance matching, directive and frequency independent patterns in the H-plane over two octaves, negligible cross-polarization levels, weak amplitude dispersivity and, according to the authors, the most stable phase center for a directive antenna over an ultra wide frequency range.     

Rain Scatter Interference in mm-Wave Broadband Fixed Wireless Access Networks Caused by a 2-D Dynamic Rain Environment

The classical Mie scattering theory together with the bistatic radar equation has been applied in this paper to quantify interference levels in broadband fixed wireless access (BFWA) for two different network topologies: mesh and cellular. The complete scattering analysis takes into account the realistic variations of rainfall along the propagation paths and inside the common volume. The interfering element is a rain cell model that follows closely the experimental characteristic dimension, decay and movement obtained in recent research by the authors. The signal-to-interference power ratios (S/I) for two different frequencies, 28 and 42 GHz, and several scattering angles have been calculated. They show that, when two beams cross each other, rain-induced interference must be taken into account for an efficient planning of radio communication systems operating at these millimeter-wave frequencies as well as for an adequate design and implementation of fade mitigation techniques.     

Structural characteristics and catalytic activities of nanocrystalline Ni-Mo-B coatings obtained by catalytic electroless reduction

The structures, chemical states of elements, and catalytic activities of Ni-Mo-B alloys with different molybdenum contents, which were obtained by catalytic electroless reduction of metal ions, were studied. The rates of the partial reactions (heterogeneous hydrolysis of dimethylamine borane, reduction of nickel ions, and evolution of molecular hydrogen) were found to make a bell-shaped curve when plotted versus the concentration of molybdate ions in solution. Original Russian Text ? V.M. Krutskikh, M.V. Ivanov, A.B. Drovosekov, E.N. Lubnin, B.F. Lyakhov, Yu.M. Polukarov, 2007, published in Zashchita Metallov, 2007, Vol. 43, No. 6, pp. 619–625.     

A 3-D Miniaturization Method for Low-Impedance Designs

Microstrip interconnects with a V conductor are designed, fabricated, and measured to provide a compact solution for designs requiring low characteristic impedance lines. S-parameter curves are shown up to 35 GHz for 0.5-cm-long lines. The 308-mum-deep V structure produces a 33.8-Omega line with strong standing waves and reflections under 5 dB. To further reduce the impedance, a partial shield is added that results in 6.7 times reduction of signal line width, near elimination of open-end effect, and excellent correlation with a standard 15-Omega microstrip up to 25 GHz. A filter demonstration shows near ideal behavior in the 3 dB response and low return loss when compared to a similar conventional design.     

PVT EMPIRICAL MODELS FOR SATURATED OMANI CRUDE OILS

Pressure-volume-temperature (PVT) properties are critical to reservoir as well as production engineers, in particular. PVT properties could be determined experimentally. But, experiments are time consuming and costly. Moreover, laboratory PVT analysis does not consider the variations of PVT properties with respect to temperature since they are measured at reservoir temperature at the time of sampling. For that matter, the data is not benefitable. But, even if experimental analysis is done, it is difficult to obtain representative results to develop a new field. To tackle the above and other related problems, relying on sound PVT emperical correlations would be the ultimate solution. In this work, the intent is to develop stochastic models for PVT properties pertaining to Omani crude oils since it is believed that such correlations are scarce and not very precise. The empirical equations are developed for saturated Omani crude oils. The correlations are tested and validated. The empirical equations evaluation and assessment are done against existent experimental data and published correlations.     

Lattice Distortion Analysis Directly from High Resolution Transmission Electron Microscopy Images—the LADIA Program Package

Direct strain mapping from high resolution transmission electron microscopy images is possible for coherent structures.At proper imaging conditions the intensity peaks in the image have a constant spatial relationship with the projected atom columns.This allows the determination of the geometry of the projected unit cell without comparison with image simulations.The fast procedure is particularly suited for the analysis of large areas.The software package LADIA is written in the PV-WAVE code and provides all necessary tools for image processing and analysis.Image iintensity peaks are determined by a cross-correlation technique,which avoids problems from noise in the low spatial frequency renage.The lower limit of strain that can be detected at a sampling rate of 44 pixels/nm is ≈2%.     

Providing application-level QoS in 3G/4G wireless systems: a comprehensive framework based on multirate CDMA

The emerging applications for 3G and 4G wireless systems typically require highly heterogeneous and time-varying quality of service from the underlying protocol layers. The wireless links, however, provide only an unreliable communication channel that suffers from temporal outages. As a consequence, protocol mechanisms are needed that, based on the unreliable wireless links, provide the different service qualities required by the emerging applications. We identify the emerging IP-based applications for 3G and 4G wireless systems and categorize their QoS requirements. We discuss the wireless access mechanisms that show promise as the basis for supporting these applications. We then propose a set of protocol mechanisms that, based on the discussed wireless access mechanisms, provide the required QoS for the different application categories.     

Quantitating Fluorescence Intensity from Fluorophore: The Definition of MESF Assignment

The quantitation of fluorescence radiance may at first suggest the need to obtain the number of fluorophore that are responsible for the measured fluorescence radiance. This goal is beset by many difficulties since the fluorescence radiance depends on three parameters 1) the probability of absorbing a photon (molar extinction), 2) the number of fluorophores, and 3) the probability of radiative decay of the excited state (quantum yield). If we use the same fluorophore in the reference solution and the analyte then, to a good approximation, the molar extinction drops out from the comparison of fluorescence radiance and we are left with the comparison of fluorescence yield which is defined as the product of fluorophore concentration and the molecular quantum yield. The equality of fluorescence yields from two solutions leads to the notion of equivalent number of fluorophores in the two solutions that is the basis for assignment of MESF (Molecules of Equivalent Soluble Fluorophore) values. We discuss how MESF values are assigned to labeled microbeads and by extension to labeled antibodies, and how these assignments can lead to the estimate of the number of bound antibodies in flow cytometer measurements.     

Uncertainty in Quantitative Electron Probe Microanalysis

Quantitative electron probe analysis is based on models based on the physics or x-ray generation, empirically adjusted to the analyses of specimens of known composition. Their accuracy can be estimated by applying them to a set of specimens of presumably well-known composition.