Buchbesprechungen

Ohne Zusammenfassung     

Ligand‐Free Synthesis of Aluminum‐Doped Zinc Oxide Nanocrystals and their Use as Optical Spacers in Color‐Tuned Highly Efficient Organic Solar Cells

The color of polymer solar cells using an opaque electrode is given by the reflected light, which depends on the composition and thickness of each layer of the device. Metal‐oxide‐based optical spacers are intensively studied in polymer solar cells aiming to optimize the light absorption. However, the low conductivity of materials such as ZnO and TiO₂ limits the thickness of such optical spacers to tenths of nanometers. A novel synthesis route of cluster‐free Al‐doped ZnO (AZO) nanocrystals (NCs) is presented for solution processing of highly conductive layers without the need of temperature annealing, including thick optical spacers on top of polymer blends. The processing of 80 nm thick optical spacers based on AZO nanocrystal solutions on top of 200 nm thick polymer blend layer is demonstrated leading to improved photocurrent density of 17% compared to solar cells using standard active layers of 90 nm in combination with thin ZnO‐based optical spacers. These AZO NCs also open new opportunities for the processing of high‐efficiency color tuned solar cells. For the first time, it is shown that applying solution‐processed thick optical spacer with polymer blends of different thicknesses can process solar cells of similar efficiency over 7% but of different colors.     

Localized Ligand Induced Electroless Plating (LIEP) Process for the Fabrication of Copper Patterns Onto Flexible Polymer Substrates

The “ligand induced electroless plating (LIEP) process” is a simple process to obtain localized metal plating onto flexible polymers such as poly(ethylene terephtalate) and polyvinylidene fluoride sheets. This generic and cost‐effective process, efficient on any common polymer surface, is based on the covalent grafting by the GraftFast process of a thin chelating polymer film, such as poly(acrylic acid), which can complex copper ions. The entrapped copper ions are then chemically reduced in situ and the resulting Cu⁰ species act as a seed layer for the electroless copper growth which, thus, starts inside the host polymer. The present work focuses on the application of the LIEP process to the patterning of localized metallic tracks via two simple lithographic methods. The first is based on a standard photolithography process using a positive photoresist masking to prevent the covalent grafting of PAA in designated areas of the polymer substrate. In the second, the patterning is performed by direct printing of the mask with a commercial laser printer. In both cases, the mask was lifted off before the copper electroless plating step, which provides ecological benefits, since only the amount of copper necessary for the metallic patterning is used.     

Single‐Step Deposition of Au‐ and Pt‐Nanoparticle‐Functionalized Tungsten Oxide Nanoneedles Synthesized Via Aerosol‐Assisted CVD,and Used for Fabrication of Selective Gas Microsensor Arrays

Tungsten oxide nanostructures functionalized with gold or platinum NPs are synthesized and integrated, using a single‐step method via aerosol‐assisted chemical vapour deposition, onto micro‐electromechanical system (MEMS)‐based gas‐sensor platforms. This co‐deposition method is demonstrated to be an effective route to incorporate metal nanoparticles (NP) or combinations of metal NPs into nanostructured materials, resulting in an attractive way of tuning functionality in metal oxides (MOX). The results show variations in electronic and sensing properties of tungsten oxide according to the metal NPs introduced, which are used to discriminate effectively analytes (C₂H₅OH, H₂, and CO) that are present in proton‐exchange fuel cells. Improved sensing characteristics, in particular to H₂, are observed at 250 °C with Pt‐functionalized tungsten oxide films, whereas non‐functionalized tungsten oxide films show responses to low concentrations of CO at low temperatures. Differences in the sensing characteristics of these films are attributed to the different reactivities of metal NPs (Au and Pt), and to the degree of electronic interaction at the MOX/metal NP interface. The method presented in this work has advantages over other methods of integrating nanomaterials and devices, of having fewer processing steps, relatively low processing temperature, and no requirement for substrate pre‐treatment.     

Rebuilding Babel: A Constitutive Approach to Tongues‐in‐use

In this paper, we suggest that the Montreal School (TMS) tradition of organizational communication offers a fruitful analytical framework that allows us to better take into account the way people practically deal with plurilingual situations as they go on with their daily activities and contribute to shaping their organizations. We identify six core features of TMS and show their analytical power in studying plurilingual interactions. TMS, we argue, is conceptually well equipped to reveal the ways in which multiple tongues are dealt with in everyday organizational settings and to uncover the constitutive nature of tongue‐in‐use.     

Transport of electrons in a GaAs quantum well in high electric fields

The rates of intrasubband and intersubband scattering of electrons by polar optical and intervalley phonons are determined in relation to the electron energy and width of a deep rectangular quantum well in GaAs. The Monte Carlo method was used to calculate the field dependences of the electron’s drift velocity in quantum wells with the width of 10, 20, and 30 nm. It is shown that the drift velocity in high electric fields in a quantum well vastly exceeds the maximum drift’s saturation velocity in the bulk material.     

Design challenges of a 65 nm CMOS stacked folded differential PA structure for mobile communications

In this paper, a novel phase-locked loop (PLL) architecture with multiple charge pumps, which is used to design a fast-locking PLL and a low-phase-noise PLL, is proposed. The effective capacitance and resistance of the loop filter in terms of voltage is scaled up/down according to the locking status by controlling the magnitude and direction of the charge pump current. Two PLLs, one with a fast-locking characteristic and the other with a low-phase-noise characteristic, are designed and fabricated in a 0.35-μm CMOS process based on the proposed architecture. The fast-locking PLL has a locking time of less than 6 μs and a phase noise of −90.45 dBc/Hz at 1 MHz offset. The low-phase-noise PLL has a locking time of 25 μs, a phase noise of −105.37 dBc/Hz at 1 MHz offset, and a reference spur of −50 dBc. Both PLLs have an 851.2 MHz output frequency.     

Gate‐Controlled Energy Barrier at a Graphene/Molecular Semiconductor Junction

The formation of an energy‐barrier at a metal/molecular semiconductor junction is a universal phenomenon which limits the performance of many molecular semiconductor‐based electronic devices, from field‐effect transistors to light‐emitting diodes. In general, a specific metal/molecular semiconductor combination of materials leads to a fixed energy‐barrier. However, in this work, a graphene/C₆₀ vertical field‐effect transistor is presented in which control of the interfacial energy‐barrier is demonstrated, such that the junction switches from a highly rectifying diode at negative gate voltages to a highly conductive nonrectifying behavior at positive gate voltages and at room temperature. From the experimental data, an energy‐barrier modulation of up to 660 meV, a transconductance of up to five orders of magnitude, and a gate‐modulated photocurrent are extracted. The ability to tune the graphene/molecular semiconductor energy‐barrier provides a promising route toward novel, high performance molecular devices.     

BETaaS: A Platform for Development and Execution of Machine-to-Machine Applications in the Internet of Things

Wireless Personal Communications - The integration of everyday objects into the Internet represents the foundation of the forthcoming Internet of Things (IoT). Smart objects will be the building...     

Reversible Formation of g‐C3N4 3D Hydrogels through Ionic Liquid Activation: Gelation Behavior and Room‐Temperature Gas‐Sensing Properties

Many unique properties arise when the 3D stacking of layered materials is disrupted, originating nanostructures. Stabilization, and further reorganization of these individual layers into complex 3D structures, can be essential to allow these properties to persist in macroscopic systems. It is demonstrated that a simple hydrothermal process, assisted by ionic liquids (ILs), can convert bulk g‐C₃N₄ into a stable hydrogel. The gelation occurs through delamination of the layered structure, driven by particular interactions between the IL and the carbon nitride sheets, forming an amphiphilic foam‐like network. This study employs spectroscopic and computational tools to unravel the gelation mechanism, and provides a rational approach toward the stabilization of 2D materials in hydrogels. The solution‐processable hydrogels can also be used as building blocks of complex devices. Chemiresistive gas sensors employing g‐C₃N₄ 3D hydrogels exhibit superior response at room temperature, enabling effective gas sensing under low power conditions.