Crosslink reaction of natural rubber with thiuram sulphur donors in the presence of a thiuram monosulfide

The vulcanization of natural rubber was studied with the sulfurating agents dipentamethylene thiuram tetrasulfide (DPTT) and tetramethylene thiuram disulfide (TMTD) in the presence of tetramethyl thiuram monosulfide (TMTM). This last accelerant affects the rate and efficiency of the vulcanization as well as the structures of crosslinks formed by the two sulphur donors. It may give rise to a polymerization between adjacent double bonds and generate a inhomogeneous crosslink distribution with an adverse effect on physical properties. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 491–499, 2002     

Lithium disilicate glass produced at high pressure: Characterization of structural,thermal and mechanical properties

In this work, high-density lithium disilicate (LS₂) vitreous systems were produced by melting and quenching under high pressure (7.7 GPa) following two distinct experimental routes. In the first case, LS₂ glass was remelted at 7.7 GPa and 1600°C and, then, quenched. In the second case, a stoichiometric mixture of precursor oxides (Li₂O and SiO₂) was melted at 1600°C and 7.7 GPa before quenching. A reference LS₂ glass sample was produced at atmospheric pressure using conventional melting and quenching procedure. The samples were characterized by X-ray diffraction, differential thermal analysis, and instrumented ultramicro hardness measurements. X-ray diffraction confirmed that all samples were amorphous and thermal analysis suggests that different glassy structures were produced depending on the route of synthesis. Hardness and elastic modulus of the glasses produced under high pressure were higher than those of the reference glass, reflecting the irreversible densification effect induced by the high-pressure processing.     

Effect of different surface treatments on polypropylene composites reinforced with yerba mate fibers: Physical,mechanical, chemical,and morphological properties

This study presents the preparation of post-consumer polypropylene (r-PP) composites filled with 30 wt% yerba mate (YM) stick particles. To improve the fiber–matrix adhesion, three surface treatments were performed: alkaline treatment with sodium hydroxide (NaOH) and use of 3-aminopropyltriethoxysilane (APTS) and maleic anhydride graft polypropylene copolymer (PP-g-MA) as coupling agents. Mechanical properties including tensile, flexural, and impact resistance were determined, and chemical (Fourier transform infrared spectroscopy [FTIR]), physical (water absorption), and morphological analyses were performed. The main findings show that the treatments were efficient in improving the mechanical properties of the composites, with emphasis on the r-PP/YM30/APTS and r-PP/YM30/PP-g-MA composites, which proved to be superior in tensile, flexion and impact strength and absorption of water compared to the untreated composite. The morphological analysis showed a better interaction between the fiber and the polymeric matrix for the composites with YM/APTS and YM/PP-g-MA, which corroborates the results of tensile and flexural strength, as well as with the spectra of FTIR in which the chemical modification of the fibers is observed. However, the results show that these treatments are promising in obtaining composites with recycled matrix with better properties.     

Self-organized porous TiO2 and ZrO2 produced by anodization

The present work investigates the electrochemical formation of self-organized high aspect ratio TiO₂ and ZrO₂ nanotube layers. The formation and growth of a self-organized porous layer can be achieved directly by anodization without any templates in fluoride containing electrolytes. The morphology of the porous layers is affected by the electrochemical conditions such as the electrolyte composition, the pH and the exact polarization treatment (such as the potential sweep rate from the open-circuit potential to the anodizing potential). For Ti, nanotube layers are formed with diameters varying from approx. 20 nm to 100 nm and lengths from approx. 0.25 μm to 2.5 μm depending on the electrolytes and pH. On the other hand, for Zr, tubes of 50 nm in diameter and up to approx. 17 μm in length can be grown—a key parameter in this case is the potential sweep rate. The large difference between Ti and Zr in the achievable thickness of nanotube layers indicates a difference in the growth mechanism which may be based on the different chemical dissolution rates of electrochemically formed oxides.     

Real-time lane tracking using Rao-Blackwellized particle filter

A novel approach to real-time lane modeling using a single camera is proposed. The proposed method is based on an efficient design and implementation of a particle filter which applies the concepts of the Rao-Blackwellized particle filter (RBPF) by separating the state into linear and non-linear parts. As a result the dimensionality of the problem is reduced, which allows the system to perform in real-time in embedded systems. The method is used to determine the position of the vehicle inside its own lane and the curvature of the road ahead to enhance the performance of advanced driver assistance systems. The effectiveness of the method has been demonstrated implementing a prototype and testing its performance empirically on road sequences with different illumination conditions (day and nightime), pavement types, traffic density, etc. Results show that our proposal is capable of accurately determining if the vehicle is approaching the lane markings (Lane Departure Warning), and the curvature of the road ahead, achieving processing times below 2 ms per frame for laptop CPUs, and 12 ms for embedded CPUs.     

Algorithm based on simulated annealing for land-use allocation

This article describes the use of simulated annealing for allocation of land units to a set of possible uses on, the basis of their suitability for those uses, and the compactness of the total areas allotted to the same use or kind of use, which are fixed a priori. The results obtained for the Terra Chá district of Galicia (N.W. Spain) using different objective weighting schemes are compared with each other and with those obtained for this district under the same area constraints, using hierarchical optimization, ideal point analysis, and multi-objective land allocation (MOLA) to maximize average use suitability. Inclusion of compactness in the simulated annealing objective function avoids the highly disperse allocations typical of optimizations that ignore this sub-objective.     

A prototype for cartographic human body analysis

A cartographic-oriented model uses algebraic map operations to perform spatial analysis of medical data relative to the human body. A prototype system uses 3D visualization techniques to deliver analysis results. A prototype implementation suggests the model might provide the basis for a medical application tool that introduces new information insight.     

Classification of Fuzzy Mathematical Morphologies Based on Concepts of Inclusion Measure and Duality

Mathematical morphology was originally conceived as a set theoretic approach for the processing of binary images. Extensions of classical binary morphology to gray-scale morphology include approaches based on fuzzy set theory. This paper discusses and compares several well-known and new approaches towards gray-scale and fuzzy mathematical morphology. We show in particular that a certain approach to fuzzy mathematical morphology ultimately depends on the choice of a fuzzy inclusion measure and on a notion of duality. This fact gives rise to a clearly defined scheme for classifying fuzzy mathematical morphologies. The umbra and the level set approach, an extension of the threshold approach to gray-scale mathematical morphology, can also be embedded in this scheme since they can be identified with certain fuzzy approaches.

A Genre-Aware Approach to Focused Crawling

Focused crawlers have as their main goal to crawl Web pages that are relevant to a specific topic or user interest, playing an important role for a great variety of applications. In general, they work by trying to find and crawl all kinds of pages deemed as related to an implicitly declared topic. However, users are often not simply interested in any document about a topic, but instead they may want only documents of a given type or genre on that topic to be retrieved. In this article, we describe an approach to focused crawling that exploits not only content-related information but also genre information present in Web pages to guide the crawling process. This approach has been designed to address situations in which the specific topic of interest can be expressed by specifying two sets of terms, the first describing genre aspects of the desired pages and the second related to the subject or content of these pages, thus requiring no training or any kind of preprocessing. The effectiveness, efficiency and scalability of the proposed approach are demonstrated by a set of experiments involving the crawling of pages related to syllabi of computer science courses, job offers in the computer science field and sale offers of computer equipments. These experiments show that focused crawlers constructed according to our genre-aware approach achieve levels of F1 superior to 88%, requiring the analysis of no more than 65% of the visited pages in order to find 90% of the relevant pages. In addition, we experimentally analyze the impact of term selection on our approach and evaluate a proposed strategy for semi-automatic generation of such terms. This analysis shows that a small set of terms selected by an expert or a set of terms specified by a typical user familiar with the topic is usually enough to produce good results and that such a semi-automatic strategy is very effective in supporting the task of selecting the sets of terms required to guide a crawling process.     

Key elements on team achievement: a retrospective analysis

This study is a historical reconstruction and in-depth scrutiny of one very successful team initiative within a Quality Improvement (QI) program in a municipal government organization. The identification of the essential concepts that contributed to the team's success and their integration into a local explanatory theory of team achievement is the final purpose of the study. The focus of this retrospective study is on the team process, with primary attention given to team members’ perspectives and reflections on the project development. Data collection and analysis were conducted with methods drawn from the qualitative research tradition and from Quality Management.

Main findings point to the importance of consistent management support, correct team composition with an emphasis on the team leader choice and demeanor, and to the central role of training in the group conduct. The negotiated approach to decision-making employed by the team, which reflected its organizational context, and the effort and mechanisms that allowed the group to reach equilibrium between internal and external interests proved critical for its ultimate achievement.