Influence of the intrinsic layer characteristics on a-Si:H p–i–n solar cell performance analysed by means of a computer simulation

In this paper a set of one-dimensional simulations of a-Si:H p–i–n junctions under different illumination conditions and with different intrinsic layer are presented. The simulation program ASCA permits the analysis of the internal electrical behaviour of the cell allowing a comparison among the different internal configurations determined by a change in the input set. Results about the internal electric configuration will be presented and discussed outlining their influence on the current tension characteristic curve. Considerations about the drift–diffusion and the generation–recombination balance distributions, outlined by the simulation, can be used to explain the correlation between the basic device output, the i-layer characteristics (thickness and DOS), the incident radiation intensity and photon energy.     

FILIP: A fuzzy intelligent information system with learning capabilities

FILIP (fuzzy intelligent learning information processing) system is designed with the goal to model human information processing. The issues addressed are uncertain knowledge representation and approximate reasoning based on fuzzy set theory, and knowledge acquisition by “being told” or by “learning from examples”. Concepts that can be “learned” by the system can be imprecise (fuzzy), or the knowledge can be incomplete. In the latter case, FILIP uses the concept of similarity to extrapolate the knowledge to cases that were not covered by examples provided by the user. Concepts are stored in the Knowledge Base and employed in intelligent query processing, based on flexible inference that supports approximate matches between the data in the database and the query.

The architecture of FILIP is discussed, the learning algorithm is described, and examples of the system's performance in the knowledge acquisition and querying modes, together with its explanatory capabilities are shown.     

Clarification of a wheat straw‐derived medium with ion‐exchange resins for xylitol crystallization

BACKGROUND: Xylitol bioproduction from lignocellulosic residues comprises hydrolysis of the hemicellulose, detoxification of the hydrolysate, bioconversion of the xylose, and recovery of xylitol from the fermented hydrolysate. There are relatively few reports on xylitol recovery from fermented media. In the present study, ion‐exchange resins were used to clarify a fermented wheat straw hemicellulosic hydrolysate, which was then vacuum‐concentrated and submitted to cooling in the presence of ethanol for xylitol crystallization. RESULTS: Sequential adsorption into two anion‐exchange resins (A‐860S and A‐500PS) promoted considerable reductions in the content of soluble by‐products (up to 97.5%) and in medium coloration (99.5%). Vacuum concentration led to a dark‐colored viscous solution that inhibited xylitol crystallization. This inhibition could be overcome by mixing the concentrated medium with a commercial xylitol solution. Such a strategy led to xylitol crystals with up to 95.9% purity. The crystallization yield (43.5%) was close to that observed when using commercial xylitol solution (51.4%). CONCLUSION: The experimental data demonstrate the feasibility of using ion‐exchange resins followed by cooling in the presence of ethanol as a strategy to promote the fast recovery and purification of xylitol from hemicellulose‐derived fermentation media. Copyright © 2008 Society of Chemical Industry     

Influence of the ethylene–(methacrylic acid)–Zn2+ ionomer on the thermal and mechanical properties of blends of poly(propylene) (PP)/ethylene–(vinyl alcohol) copolymer (EVOH)

The thermal and mechanical properties and the morphologies of blends of poly(propylene) (PP) and an ethylene–(vinyl alcohol) copolymer (EVOH) and of blends of PP/EVOH/ethylene–(methacrylic acid)–Zn²⁺ ionomer were studied to establish the influence of the ionomer addition on the compatibilization of PP/EVOH blends and on their properties. The oxygen transmission rate (O₂TR) values of the blends were measured as well. PP and EVOH are initially incompatible as was determined by tensile tests and scanning electronic microscopy. Addition of the ionomer Zn²⁺ led to good compatibility and mechanical behaviour was improved in all blends. The mechanical properties on extruded films were studied for 90/10 and 80/20 w/w PP/EVOH blends compatibilized with 10 % of ionomer Zn²⁺. These experiments have shown that the tensile properties are better than in the injection‐moulded samples. The stretching during the extrusion improved the compatibility of the blends, diminishing the size of EVOH domains and enhancing their distribution in the PP matrix. As was to be expected, the EVOH improved the oxygen permeation of the films, even in compatibilized blends. Copyright © 2004 Society of Chemical Industry     

N.m.r. line shape-relaxation correlation analysis of bitumen and oil sands

The first results of the analysis of bitumen and oil sands using the recently developed n.m.r. spingrouping technique are presented. The n.m.r. relaxation experiments were carried out on bitumen, and on natural and dried oil sands samples. The results indicate that the spin-grouping can resolve and quantify several components of the samples studied. The bitumen and bitumen fraction of the oil sands are resolved according to their spin-spin relaxation times into three major groups: solid-like (rigid), solid-like (mobile) and semi-liquid. The water in the oil sands exists in two different environments. Tentatively one environment is assigned to be the bridges between the sand grains, while the other is assigned to be the clay surface. One can conclude that with spin grouping of complex mixtures the decomposition (in which components are resolved according to their dynamic state) is possible. The accuracy of such resolution is of the order of a few per cent.     

Comparing word fragment completion and cued recall with letter cues.

Cued recall with word stems as cues and fragment completion rely on different types of letter cues and also differ in the explicit–implicit nature of the retrieval orientation. Despite these differences, variables effective in one task may be effective in the other because both rely on letter cues. Two variables known to affect cued recall were manipulated: Lexical set size (number of words that fit the letter cue) and meaning set size (number of associates generated to the studied words). Across four experiments, subjects in each task were less likely to recover targets from larger lexical sets. However, meaning set size affected cued recall but not fragment completion. These results indicate that fragment completion and letter-cued recall are based on lexical search but that cued recall also involves a semantic search component. Furthermore, type of retrieval cue had a greater effect than type of retrieval orientation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Biodegradable hollow microfibres to produce bioactive scaffolds

Biodegradable hollow microfibres containing particles loaded with specific active agents can be potentially employed to produce a special kind of substrate for tissue engineering, able to function as a scaffold and at the same time to act as a drug‐releasing system. Biodegradable hollow microfibres based on poly(lactic acid) were produced by a dry–wet spinning procedure. Drug‐loaded microparticles were prepared by a simple oil‐in‐water emulsion and entrapped inside the fibres. The morphology of both fibres and particles was investigated by scanning electron microscopy. The mechanical and thermal properties of the fibres were investigated by tensile tests and differential scanning calorimetry. In vitro tests were performed to evaluate the release of the drug from the fibres loaded with the particles Copyright © 2004 Society of Chemical Industry     

Retaining maximum antioxidative potency of wheat germ oil refined by molecular distillation

A process of physical refining wheat germ oil using the technique of molecular distillation (MD) is presented in this work. Wheat germ oil was obtained from the germ by solvent extraction using hexane and also by cold pressing. The oil extracted with hexane was degummed and bleached before deacidification in order to modify the parameters of phosphorus and color. The goal in carrying out the stage of physical refining by MD was to preserve the maximum amount of original antioxidative potential obtained from extraction of the crude oil. The effect of evaporation temperature of one‐stage MD on the efficiency of free fatty acid elimination was studied. The antioxidant portion was followed by means of analytic determination of tocopherols by high‐performance liquid chromatography. Tocopherol retention up to 98% was achieved in the oil extracted by pressing, and yields of up to 96% were achieved in the oil extracted with hexane. Copyright © 2007 Society of Chemical Industry     

Co- and Ni-exchanged ferrierite: The contribution of synchrotron X-ray diffraction data to siting of TMIs

High-silica zeolites exchanged with transition metal ions (TMIs) are the subject of great interest for their unusual catalytic activity and selectivity. Structural information like coordination and accessibility of TMIs in zeolites are important factors for understanding their catalytic activity. Siting of TMIs in zeolites is typically obtained by spectroscopic (EXAFS, EPR, UV–vis and IR) and computational methods, as in the case of Co-ferrierite. However, some controversy exists in the literature concerning the model for incorporation of bare Co ions in ferrierite. We show here that the results of our synchrotron X-ray powder diffraction studies on Co- and Ni-exchanged ferrierite (Si/Al = 8.5) are in a good agreement with the model of Co siting based on an indirect spectroscopic approach and help to validate this model. By direct structural evidences, a possible explanation for the larger catalytic activity of Co sites in the main channels of ferrierite can be inferred. A combination of data from in situ XRD continuous monitoring of the Co ion migration during calcination and crystal-chemical considerations allows to device a strategy for the design of optimised co-cations containing Co-ferrierite catalysts.