Preparation and evaluation of a cosmetic adhesive containing guar gum

Guar gum is an effective agent for use as a natural adhesive ingredient that can be used to replace the hazardous ingredients of spirit gum. This study describes the possibility of using guar gum as a renewable substituent for cosmetic adhesive. An adhesive base and cosmetic adhesive containing guar gum were prepared by a two-step process. The samples were tested for safety (cell toxicity test and patch test), stability (centrifugation, cycling and viscosity), and effectiveness (tensile strength). The results from the MTT assay show that the growth activity of human fibroblast skin cells was over 89% in all concentrations of cosmetic adhesive containing guar gum. In addition, no special skin reactions were reported in the patch test prepared adhesive containing guar gum. Moreover, the stability test demonstrated proper stability of all adhesive samples: the composition stability, heat stability, and viscosity of the adhesive samples maintained stable conditions. The efficacy test confirmed the superiority of the guar gum adhesive samples over spirit gum concerning the tensile strength. This study demonstrated that guar gum may be a viable replacement for synthetic rosins and also as a substituent in cosmetic.     

Acid-resistant organic coatings for the chemical industry: a review

Industries that work with acidic chemicals in their processes need to make choices on how to properly contain the substances and avoid rapid corrosion of equipment. Certain organic coatings and linings can be used in such environments, either to protect vulnerable construction materials, or, in combination with fiber reinforcement, to replace them. However, degradation mechanisms of organic coatings in acid service are not thoroughly understood and relevant quantitative investigations are scarce. This review describes the uses and limitations of acid-resistant coatings in the chemical industry, with a comparison to alternative resistant materials based on metals or ceramics. In addition, coating degradation phenomena, caused by acid exposure, are mapped to the extent possible, and analysis methods for detecting coating degradation type and severity are listed and discussed. It is concluded that more knowledge on chemical and physical degradation mechanisms is required, and that improvements in resistance to elevated temperatures and abrasion would decrease the risk of use and increase the potential application areas of organic coatings exposed to acidic environments in the chemical industry.     

Green Adeptness in the Synthesis and Stabilization of Copper Nanoparticles: Catalytic,Antibacterial, Cytotoxicity,and Antioxidant Activities

Copper nanoparticles (CuNPs) are of great interest due to their extraordinary properties such as high surface-to-volume ratio, high yield strength, ductility, hardness, flexibility, and rigidity. CuNPs show catalytic, antibacterial, antioxidant, and antifungal activities along with cytotoxicity and anticancer properties in many different applications. Many physical and chemical methods have been used to synthesize nanoparticles including laser ablation, microwave-assisted process, sol-gel, co-precipitation, pulsed wire discharge, vacuum vapor deposition, high-energy irradiation, lithography, mechanical milling, photochemical reduction, electrochemistry, electrospray synthesis, hydrothermal reaction, microemulsion, and chemical reduction. Phytosynthesis of nanoparticles has been suggested as a valuable alternative to physical and chemical methods due to low cytotoxicity, economic prospects, environment-friendly, enhanced biocompatibility, and high antioxidant and antimicrobial activities. The review explains characterization techniques, their main role, limitations, and sensitivity used in the preparation of CuNPs. An overview of techniques used in the synthesis of CuNPs, synthesis procedure, reaction parameters which affect the properties of synthesized CuNPs, and a screening analysis which is used to identify phytochemicals in different plants is presented from the recent published literature which has been reviewed and summarized. Hypothetical mechanisms of reduction of the copper ion by quercetin, stabilization of copper nanoparticles by santin, antimicrobial activity, and reduction of 4-nitrophenol with diagrammatic illustrations are given. The main purpose of this review was to summarize the data of plants used for the synthesis of CuNPs and open a new pathway for researchers to investigate those plants which have not been used in the past.

Open image in new window

Graphical abstract Proposed Mechanism for Antibacterial activity of copper nanoparticles.

     

C3S and C2S hydration in the presence of Na2CO3 and Na2SO4

This study analyses the behavior of calcium silicates C₃S and C₂S hydrated in two alkaline media, Na₂CO₃ and Na₂SO₄. The silicates were synthesized with laboratory reagents and hydrated in water, to which solid‐state alkaline activators with 4 wt% Na₂CO₃ or 4 wt% Na₂SO₄ were added. Two‐ and 28‐day mechanical strength values were determined and the reaction products were characterized with XRD, SEM/EDX, and ²⁹Si and ²³Na MAS NMR. The findings showed that the presence of Na₂CO₃ hastened hydration kinetics and stimulated early‐age mechanical strength development in both silicates. The most significant effect of sodium sulfate, however, was observed in the 28‐day material in both silicates, in which it raised strength by stimulating the precipitation of C–S–H gels with a high percentage of Q² units.     

PBAT/organoclay composite films: preparation and properties

Environmental problems caused by the increased waste associated with short-term use of plastic materials, particularly by the food packaging industry, prompted the search for biodegradable alternatives. This contribution studied one of these alternatives, poly(butylene adipate-co-terephthalate)—PBAT, a polymer that is fully biodegradable in common landfills, compounded with a small amount of Cloisite 20A organoclay. Materials were mixed in a laboratory internal mixer and films prepared in a chill roll extruder. Results show that the presence of organoclay does not increase degradation of the polymer matrix during processing, nor affects its crystallization characteristics. However, organoclay addition significantly diminished oxygen and carbon dioxide permeability of the films, making them a very interesting alternative for the food packaging industry.     

Drying of Pastes in Vibro-Fluidized Beds: Effects of the Amplitude and Frequency of Vibration

Abstract

The dimensionless vibration number (Γ) is the parameter most widely applied to quantify the vibration energy of a vibro-fluidized bed. It is defined as a function of the amplitude (A) and of the frequency of vibration (f). Most works in literature present their results as a function of Γ, which is adopted as a single parameter to explain the results on fluid dynamic behavior of vibro-fluidized beds, independent on the magnitudes of A and f. From its definition, however, it is possible to obtain identical values of Γ just by combining different values of A and f, and further studies are necessary for a better analysis of fluid dynamic behavior of vibro-fluidized beds concerning their vibration energy. Therefore, in this work the effects of dimensionless vibration number on the fluid dynamic behavior of a vibro-fluidized bed will be investigated by choosing different combinations of A and f values arranged to provide identical values of Γ. The tests were carried out for dry and wet beds, for values of Γ = 0.0 (fluidized bed), 1.0, 2.0, and 4.0. The results indicate that Γ must be used carefully when applied as the only parameter to characterize the vibration effects in a vibro-fluidized bed since very different fluid dynamic behavior was detected at a fixed Γ at different amplitudes and frequencies.     

Extractant Assisted Synthesis of Polymer Stabilized Platinum and Palladium Metal Nanoparticles for Sensor Applications

Abstract

Extractant‐assisted synthesis of platinum and palladium polymer‐stabilized metal nanoparticles (PSMNP) was carried out for the first time. The synthesis included the following sequential steps: a) loading of extractant (tributyl‐phosphine oxide, TBPO) with the desired metal ion; b) preparation of a membrane “cocktail” by mixing a metal‐containing extractant, solution of the polymer (PVC or polysulfone) and plastisizer; c) membrane deposition and metal reduction inside the membrane (intermatrix synthesis of PSMNP) by using either a chemical or an electrochemical reduction technique. The electro conductivity of the resulting polymer‐metal nanocomposite membrane appeared by several orders of magnitude higher than that of the metal‐free polymer. The mass‐exchange properties of PSMNP‐containing membranes were shown to depend on both the type of the polymer and the membrane deposition technique.     

Apparent Molar Volumes of N,N – Disubstituted Monoamides: A Convenient Tool to Interpret Iron(Iii) Extraction Profiles from Hydrochloric Acid Solutions

New iron(III) extraction data involving two N,N-disubstituted monoamides, N-ethyl-N-phenyloctanamide (EPHOA) and N-ethyl-N-cyclohexyloctanamide (ECHOA), from hydrochloric acid media, are presented and discussed. These, and earlier results obtained with other similar N,N-disubstituted monoamides, are interpreted in this work through their apparent molar volumes in 1,2-dichloroethane, and all the information is being used to screen for solute-solute and solute-diluent interactions. The results collected help to understand why N-cyclohexyl monoamides are generally more efficient than their N-phenyl analogues as liquid-liquid extractants for iron(III) from 3 to 5 M hydrochloric acid solutions, and clearly denote that N-phenyl monoamides are essentially monomeric whereas N-cyclohexyl monoamide derivatives have a tendency to aggregate in the organic solution.     

Effect of Immersion Time in Osmosis and Ultrasound on Papaya Cell Structure during Dehydration

The effect of ultrasound-assisted osmotic dehydration applied at atmospheric pressure for different lengths of time on papaya tissue structure was evaluated. Ultrasound induced the loss of cellular adhesion, formation of large cell interspaces, and light rupture of the cell walls. The changes in the tissue structure caused by ultrasound application increased sugar loss, water loss, and effective water diffusivity. Ultrasound-assisted osmotic dehydration induced a gradual distortion in the shape of the cells, loss of cellular adhesion, and the formation of large channels caused by rupture of the cell walls. The changes caused by the application of osmotic dehydration resulted in high water loss and sugar gain.     

Chlorinated Polycyclic Aromatic Hydrocarbons Associated with Drinking Water Disinfection: Synthesis,Formation under Aqueous Chlorination Conditions and Genotoxic Effects

Polycyclic aromatic hydrocarbons (PAHs) are among the most persistent and toxic organic micropollutants present in water and several of them are mutagenic and carcinogenic. Although it has been shown that chlorinated derivatives of PAHs (Cl-PAHs) may be formed during the water chlorination procedure, little is known about their potential genotoxic and carcinogenic effects. The objectives of the present work were to prepare and characterize the major chlorinated derivatives of benzo[a]pyrene (BaP) and fluoranthene (Fluo), to develop an analytical methodology for their quantification in water samples and to analyse their potential genotoxicity. Chlorinated standards were prepared by a newly developed two phase method (water/n-hexane) using sodium hypochlorite. 6-Chloro-benzo[a]pyrene was selectively obtained from BaP, while 1,3-dichloro-fluoranthene and 3-chloro-fluoranthene were obtained from Fluo. All products were isolated and characterized by nuclear magnetic resonance and mass spectrometry. The formation of BaP- and Fluo-chlorinated derivatives under aqueous chlorination conditions was observed using a SPE-HPLC-FLD methodology. In addition, the cytotoxic and genotoxic activities of the three chlorinated derivatives were analyzed in comparison to their parent compounds, in a human-derived hepatoma cell line using the neutral red uptake and comet assays, respectively. The results showed that, at the equimolar doses of 100 and 125 μM, 6-Cl-BaP was able to induce a significantly higher level of DNA damage than BaP, suggesting a more potent genotoxic effect. In contrast, neither Fluo nor its chlorinated derivatives were genotoxic in the same cell line. The identification of new and possibly hazardous water chlorination by-product from PAHs emphasizes the need to minimize total organic carbon content of raw water and the implementation of safer water disinfection methods.